Behold, here is a new member to the Seeed Studio XIAO series, like a Thumbelina carrying a complete Wi-Fi system along with Bluetooth Low Energy function - the Seeed Studio XIAO ESP32C3 has launched!
Features
-
Outstanding RF performance: Powerful ESP32-C3 SoC and U.FL antenna provided that supports WiFi/Bluetooth connection over 100m.
-
Thumb-size Design: 21 x 17.5mm overall dimension, portable and lightweight.
-
Low power consumption: Lowest as 44 μA (deep sleep mode), with 4 working modes available.
-
Onboard battery charge IC: Supports battery charging, great for various wearable scenarios and wireless IoT applications.
Seeed Studio XIAO ESP32C3 has equipped a highly-integrated ESP32-C3 chip, built around 32-bit RISC-V chip processor with a four-stage pipeline that operates at up to 160 MHz. Retaining the Seeed Studio XIAO series classic form-factor of small and exquisite, it offers 2.4GHz Wi-Fi and BLE(Bluetooth Low Energy) wireless capabilities to the developers. With the addition of ultra-low-power cost and charging ability, it provides a perfect solution for various IoT controlling scenarios and complex carriable applications.
As you can see, the board uses the highly-integrated ESP32-C3 SoC. The chip has been installed with a complete 2.4GHz Wi-Fi subsystem which means it supports Station mode, SoftAP mode, SoftAP & Station mode, and promiscuous mode for multiple Wi-Fi applications. It works under an ultra low power state, also supporting features of Bluetooth 5 and Bluetooth mesh. There are 400 KB SRAM & 4 MB Flash on the chip, allowing for more programming space, and bringing more possibilities to the IoT control scenarios.
Being a member of the Seeed Studio XIAO family, the board deservedly maintains the classic thumb-sized form-factor design and elegant productization single-sided components mounting. Meanwhile, it is equipped with a battery charge chip and integrated circuit for enhancing its ability to carry. This board comes included with an external antenna to increase the signal strength for wireless applications. There are 11 digital I/O that can be used as PWM pins and 4 analog I/O that can be used as ADC pins. It supports four serial interfaces - UART, I2C, SPI and I2S. Utilizing its small and exquisite hardware design and the powerful onboard chip, programming by Arduino, it will offer more ability to wearable and portable devices or other applications.
Specifications
| Item |
Seeed Studio XIAO ESP32C3 |
| Processor |
ESP32-C3 SoC |
| RISC-V single-core 32-bit chip processor with a four-stage pipeline that operates at up to 160 MHz |
| Wireless |
Complete 2.4GHz Wi-Fi subsystem |
| Bluetooth 5.0/ Bluetooth mesh |
| On-chip Memory |
400KB SRAM & 4MB Flash |
| Interface |
1x UART, 1x I2C, 1x I2S, 1x SPI,11x GPIO(PWM), 4x ADC |
| 1x Reset button, 1x Boot button |
| Dimensions |
21 x 17.5mm |
| Power |
Circuit operating voltage: 3.3V@200mA |
| Charging current: 50mA/100mA |
| Input voltage (VIN): 5V |
| Deep Sleep Power Consumption |
Deep Sleep Model: >44 μA |
| Wi-Fi Enabled Power Consumption |
Active Model: <75 mA |
| Modem-sleep Model: <25 mA |
| Light-sleep Model: <4 mA |
| BLE Enabled Power Consumption |
Modem-sleep Model: <27 mA |
| Light-sleep Model: <10 mA |
Applications
- Internet of Things
- Wearable devices
- Health monitoring
- Education
- Low-Power(LP) networking
- Rapid prototyping
If you are interested in programming embedded machine learning, Seeed have Codecraft graphic programming that can help you quickly start your own TinyML project. And they have set up a #tinyml channel on their Discord server, please click to join for 24/7 making, sharing, discussing, and helping each other out.
Documentation
Learn
-
XIAO ESP32C3 wiki - This wiki will show you how you can quickly get started with XIAO ESP32C3!