MyoWare 2.0 Power Shield

Name: MyoWare 2.0 Power Shield
Brand: Sparkfun
SKU: DEV-18427
Price: 16.50 GBP
Availability: OutOfStock

by Sparkfun

The MyoWare® 2.0 Power Shield is designed to easily power the MyoWare 2.0 Muscle Sensor for remote applications.

The MyoWare Power Shield is equipped with snap connectors on the board so you can easily stack it to the top side of the MyoWare Muscle Sensor. Flip the switch to the ON position to give the sensor all the power it needs to work its myoelectric magic.

Each board comes with a 40mAh single cell, lithium polymer (LiPo) soldered to the board. Recharge the battery through the USB Type C connector and its dedicated LiPo charging circuit set to a charge rate of 40mA. This board also includes status LEDs for charging (CHG, FULL, power (VIN), and envelope (ENV). Connecting the MyoWare 2.0 Muscle Sensor to battery power allows for a cleaner signal while also eliminating the possibility of creating a dangerous current path to the power grid. Use it to power your sensor in portable applications.

Note: MyoWare and the Power Shield are not intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation treatment, or prevention of disease, in a man or other animals.

The MyoWare® 2.0 ecosystem consists of shields that easily interface with the MyoWare® 2.0 Muscle Sensor, which is a low-cost, Arduino-compatible, all-in-one electromyography (EMG) sensor from Advancer Technologies. The innovative connector system allows users to easily snap shields together with a compact low profile and connect to a microcontroller's analog input to measure raw, filtered, and rectified electrical activity of a target muscle. This eliminates the need to solder connections between boards.

This product is a collaboration with Brian Kaminski from Advancer Technologies. A portion of each sales goes back to them for product support and continued development.

Get started with the MyoWare Power Shield 2.0 Power Shield Guide

Features

Input Voltage
- 5V via USB Type C Connector
Output Voltage (e.g. "VIN")
- Nominal Voltage: 3.7V
- Fully Charged: 4.2V
Power Switch
Built-in LiPo Battery
- Rated Capacity: 40mAh
- Nominal Voltage: 3.7V
- Max Charge Current: 1C (40mA)
MCP73831 Single Cell LiPo Charge IC
- Charge Rate Set to 40mA
MyoWare® 2.0 Muscle Sensor Form Factor
- 3x Female Snap Pins (Power and EMG Envelope Output)
LEDs
- VIN
- ENV
- FULL
- CHG
Board Dimensions
- 53.34mm x 59.69mm (2.10” x 2.35”)

Documents

Board Dimensions
Hookup Guide
Advancer Technologies: MyoWare® 2.0
- Quickstart Guide
- Advanced Guide
- Patents^[1]
MCP73831 Datasheet
Polymer Lithium Ion Battery (40mAh)
- Datasheet
- MSDS
Arduino Reference Language: ArduinoBLE Library
GitHub Example Repo
MyoWare 2.0 Ecosystem Page

^{[1] Note: This product is patent protected. To prevent counterfeit boards, the Eagle design files and GitHub hardware repository are not shared for boards in the MyoWare 2.0 ecosystem.}

The MyoWare® 2.0 Power Shield is designed to easily power the MyoWare 2.0 Muscle Sensor for remote applications.

DEV-18427

You must register for an account and be logged in to view pricing or place an order on the Pimoroni Wholesale store.

If you represent a school or university, a business, or reseller of Maker products then you can sign up for a wholesale account.

If you already have an account you can login to your account here.

Alternatively the easiest way to get your hands on the products we offer is to order them directly from our customer facing online store.

SKU

DEV-18427

EAN

845156012312

Brand

Sparkfun

Stock available

0 units
Backorder not allowed on this product

Weight

MyoWare 2.0 Power Shield

Video introduction

Guides & tutorials

Search

Select currency

Video introduction

Guides & tutorials