Thank you for the PCIe flex cable – it’s a great addition for connecting the NVMe Base to my Raspberry Pi 5, and everything works as expected. However, I also purchased the HAILO HAT+ in the same order, which requires the PCIe port as well. Unfortunately, I’ve now realized that...

flimsy

Perfect works Great with my 3d printer. No more transferring to a sd card just print straight off the pc

Perfect for the zero 2

Worked perfectly for my application and Piorini was also the cheapest : so Winner allround

Easy installation, PIMORONI instructions are straight forward great product. Only glitch i had was 1 of the stand offs/posts was not thread 1 side no big issue 3 screws were enough 1 side will buy again. Thanks PIMONORI.

Great piece of hardware. Using it with to wiznet w5500 Ethernet/RP2040 as debug and UART. Programmed with VS Code and embassy-rust.

Software is outdated

This is a tale of two boards, and aom exemplary customer service. I've got a dozen of these things, but the latest turned out faulty. Bad solder joint. Two emails later, I've got a perfect replacement. Works great, fantastic fun to.play with, magnificent customer care....

The pico 2 W LED matrix board is easy to program and looks very nice.

Recommend for the Unicorn. Quick delivery and helpful Customer Service.

Great addition for the Unicorn LED matrix.

I am using Clipper LTE 4G Breakout and Pimoroni Pico Plus 2 with BME680. I use Thonny and MicroPython to measure every 6 hours, and messages can be published via HTTP PUT/POST or ntfy CLI.

Works perfectly with my Pi 500, quick delivery and well packaged, solved the issue of the Pi complaining it doesn't have enough power.

Works perfectly with my Pi 4, quick delivery and well packaged.

Works a treat on an Adafruit RP2040 feather. The standard library was too temperamental on my standard Adriano UNO due to limited memory. but Adafruit warn you of that.

Great service and great product every time.

Super Fast and very good quality!

Super Fast and very good quality!

I'm new to the PI world though no stranger to microcontrollers when I was working. The Pico is a fantastic device, able to store quite large programs and with great subsystems (for communication with other devices, for example). I'm learning Python at the same time and the Pico is a...

This case is quality perfect had no issues building and I’m just waiting on ssd to arrive. It looks great on the desk too.

Realy needed acccessory for the Pi.

Works as expected. Great Investment.

Really Helpful!! Genuine Product

fast delivery and product as described, easy checkout. best experience buying electronics!

I grabbed the CM5 8GB (no eMMC) as soon as it became available (having missed the first batch) with the intention of trying it out as a replacement for the CM4 4GB that came with my Clockwork Pi uConsole. It then took a little while (with help from the awesome...

Really nice drop-in replacement for a Raspberry Pi Pico (at least for my project) with a few major improvements: 1. USB C connection - worth the extra price for me just to avoid those pesky micro-usb 2. LiPo connection with seamless charging, also easy to get battery status estimate (although I don't...

Price was great, delivery was extremely fast. The product works like a treat. I’m a very happy customer and will be buying in bulk for the future 👍

Excellent service and fast delivery would definitely recommend

So quiet, but seems to be benchmarking better than just the heatsink. Very pleased!

Bought the 16GB model, really pleased and using it as an observatory controller.

Awesome little toolkit, really useful for all sorts pf Raspberry Pi work. Very useful!

You will be surprised by the output with 7 color!

Really great potable monitor for the price. Has a vesa mount unlike others in the price range. Would be nice to be able to just use USBC for power and display.

A good well made case. No issues putting it together and getting it working with NCME drive.

Very happy with these devices they look nice and work well so far. However after setting them up in Home Assistant I was alerted that a firmware update was available. The update failed several times so I tried removing them and setting up again. The firmware prompt then seemed to...

Worked straight out of the box and easily connected to my home assistant green.

Great device. Works well up close, and integrates nicely with Home Assistant. Once connected to an AI backend (like OpenAI), it becomes much smarter (just name your devices clearly! ). From a distance, it sometimes mishears commands. A larger version with more mics would be ideal. Still, 5/5 for its...

great product, shipped quickly, super happy

great product, shipped quickly, super happy

Without any cooler, the pi gets too hot to touch. With this active cooler, now I can run it for a long time without worry.

High speed, compact, functional. Oh ... and it works.

Easy to install. Running at 800MB with a kingston NVMe disk. Well worth it.

Works a treat on my POi Zero 2 Zerotier bridge setup, to connect the outside world to my local Ethernet LAN. Also used it for temporary USB keyboard/mouse during setup.

Fan not needed if bought with active cooler

The perfect addition to my Raspberry Pi 5 8GB! Delivery was very fast. Setup is easy. Perfect!

Purchased to replace a similar product from China which was becoming unreliable after several years. This breadboard has shiny silver peeping through the holes and I noticed the contacts were very springy! My hope is that this will make it reliable over the next few years.

These water leak sensors are impressive but time will tell. It's not obvious, but the "cable" like attachment greatly extends the scope of a sensor. They are very sensitive to water, only a small splash on the "cable" is instantly detected as a leak. It took about half an hour...

My "go to" board for any sensor and IoT stuff.

An excellent board. Expanded memory is a big plus.

Needed for Pico Plus 2W board. Easy to solder on with a little patience!

Always use these for both my rPi4s and now an rPi5. Easy to fit and all that is needed to keep them cool and working. My Pi's are on 24/7 and never need any additional cooling. Definitely recommend.

Great product- using this to create (hopefully!) a live performance device for synthesisers, and of course there’s a library there to help get started with that. Love how easy Pimoroni make it to get started with their products!

Well made and sturdy cooler

Nice base for extra disk and well documented

Amazing worked straight out of the packet. Going to buy a few more. Item was delivered speedily. Brilliant will use again.

Very fast replacement for my Raspberry PI 4

all is fine

Quality cable and no problems so far.

Exactly as expected, I have since flashed the Sonoff ESP32 with the GitHub BierBot software and it works fine, the new type of temp prob ds18b20 has a lump/chip? Near the plug end in the cable which needs to be cut out and the wires re-connected in order to run...

Love this thing. Have modified the example news reader to work with NRK.no.

Fun little gadget. Using it for my chilis.

Great pack

Overall, the Raspberry Pi 5 Official 27W PSU is a straightforward, no-fuss solution that ensures your Raspberry Pi 5 gets the power it needs for peak performance, making it a worthwhile purchase for any serious user.

The fan operates quietly, and its active cooling ensures that the Raspberry Pi 5 stays cool even during demanding tasks.

The Pimoroni NVMe Base Duo for Raspberry Pi 5 is a fantastic addition for anyone looking to enhance their Raspberry Pi's storage capabilities. The only thing to keep in mind is that you’ll need an external power supply to make sure everything runs smoothly, as NVMe drives tend to require...

Rapide et conforme

The product itself is solid and works well, but the screws that come with it are incredibly poor quality, they broke almost immediately during installation. Now, the base is permanently attached to the Pi because 2 out of 4 screws snapped inside. Don’t get me wrong, the product is good, but...

Prompt delivery and work well as backlights for Crown XTi amplifiers

Delivery was fast , the TSC2007 board worked as expected, I will definitely use PIMORONI again

work as expected!

work as expected!

work as expected!

work as expected!

Absolutely perfect, paired with a WLED controller and a Zigbee compatible remote and it's made an amazing nightlight for my daughter's room strung across her ceiling. In her words, "It's so beautiful, I LOVE IT SO MUCH!".

Is very nice and compact, with easy mounting options. The only downside seems to be that in Home Assistant at least whilst the "Occupied" sensor turns on and off, the "Motion Detected" sensor seems to get stuck as always detecting motion. I've just set my automation to use the occupied...

this is really cool to mess around with it need more time to research what else people have used this for but 10/10

Well made. Easy to install. Works a treat. I'm new to this computing lark, so many thanks for a sound product.

Just works!

Just works!

Just works!

Keep a cool head and a cool Pi