Home Assistant Connect Z-Wave Adapter (ZWA-2)

Name: Home Assistant Connect Z-Wave Adapter (ZWA-2)
Brand: Home Assistant
SKU: NC-ZWA-9734
Price: 51.00 GBP
Availability: InStock

by Home Assistant

This official adapter with built-in antenna and indicator light is the ultimate way to connect Z-Wave devices up to Home Assistant.

Please note that we're not able to supply Home Assistant products to resellers.

ZWA-2 lets you easily integrate Z-Wave devices with your Home Assistant setup. The antenna and base are precisely tuned to Z-Wave’s ideal wavelength to provide a reliable connection and maximize range. It also supports Z-Wave Long Range* which provides a dependable, responsive connection to far-away devices plus improved battery life. Designed by the team driving forward Home Assistant and Z-Wave JS, it offers plug-and-play setup and effortless migrations.

📐 PRECISELY ENGINEERED – The antenna and base are precisely tuned to Z-Wave’s ideal wavelength, working in harmony to provide a reliable connection and maximize range.
✅ LATEST Z-WAVE CHIPSET – Certified and includes the latest 800-series chipset, it supports all Z-Wave devices.
🌊 ALL THE BENEFITS OF Z-WAVE – While Zigbee, WiFi, and Bluetooth all share the same airspace, Z-Wave has its own frequency that better cuts through thick walls and with less interference in busy areas.
📶 LONG RANGE COMPATIBLE – This newest iteration of the standard delivers more reliable, responsive connections to very far-away devices, and improved battery life.*
🏠 BUILT FOR HOME ASSISTANT – Designed by the team driving forward Home Assistant and Z-Wave JS.
🔄 EFFORTLESS MIGRATION – Moving from most other adapters to ZWA-2 can be done in a couple of clicks.
✨ PLUG AND PLAY – Z-Wave setup has never been easier, thanks to our intuitive start-up wizard and one-click firmware updates.
📬 MORE RANGE MORE OPTIONS – Set up a mailbox sensor in your apartment building or smartify a motorized gate at the end of your driveway.
🧬 2ND GENERATION PLATFORM – Built on the second-generation Home Assistant Connect platform (hence the 2), it is designed to be performant and open.
🕯️ DESIGNED FOR THE HOME – From its injection molded case, to sleek lines, it's designed to blend into home decor. It not only resembles a candle, but it also lights up like one.

*At launch, Z-Wave Long Range has limited device support outside North America, but this will expand soon.

Key Features

In the box: Antenna, Base, USB-Cable (USB 2.0/3.0), Quickstart guide.
Supporting devices: Z-Wave 800 and older (including Z-Wave Plus and Plus V2), Z-Wave Long Range (only in EU and US).
Supported features: Security 2 (S2), SmartStart, Over-the-Air (OTA) Firmware Updates, Over-the-Wire (OTW) firmware updates.
Supported regions: All Z-Wave regions, including US, EU, and AU. Long Range support currently includes only the US and EU regions.
Chips inside: Silicon Labs ZG23 (Z-Wave 800 series chip) and ESP32-S3 (USB-serial bridge).

Specifications

Model: NC-ZWA-9734
Conformity: CE, FCC, RCM
FCC-ID: 2A8ZE05
SoCs: Silicon Labs ZG23, ESP32-S3 (USB-serial bridge)
Power and data: USB-C, 5 V DC, 1 A
Supported protocols: Z-Wave, Z-Wave Long Range
Z-Wave series: 800
Antenna characteristics:
- Frequency range: 860-930 MHz
  The frequency used by end devices depends on the region, e.g:
  US: 908.42/916 MHz (mesh), 912/920 MHz (LR)
  EU: 868.4/869.85 MHz (mesh), 864.0/866.0 MHz (LR)
  AU: 919.8/921.4 MHz
- Peak gain: 3.38 dBi
- Radiation pattern: Omnidirectional
Dimensions & weight: 125x125x315 mm, 350 g
Environmental conditions for operation:
- Indoor use only
- 0°C to 65 °C
- Humidity: non-condensing
- Keep in dry, not excessively dusty environment, as this can cause damage to the unit.
- Do not leave the unit in direct sunlight or near any heat source, as this can cause overheating.

Resources

Notes

Connect ZWA-2 was designed to operate with Home Assistant and the Z-Wave JS add-on. If you use Connect ZWA-2 without Home Assistant, please visit: https://go.nabucasa.com/zwa-2-without-home-assistant

This official adapter with built-in antenna and indicator light is the ultimate way to connect Z-Wave devices up to Home Assistant.

NC-ZWA-9734

You must register for an account and be logged in to view pricing or place an order on the Pimoroni Wholesale store.

If you represent a school or university, a business, or reseller of Maker products then you can sign up for a wholesale account.

If you already have an account you can login to your account here.

Alternatively the easiest way to get your hands on the products we offer is to order them directly from our customer facing online store.

SKU

NC-ZWA-9734

EAN

860011789734

Brand

Home Assistant

Stock available

200+ units
Backorder not allowed on this product

Weight

650g

Home Assistant Connect Z-Wave Adapter (ZWA-2)

Video introduction

Guides & tutorials

Search

Select currency

Video introduction

Guides & tutorials