Adafruit INA219 FeatherWing

Name: Adafruit INA219 FeatherWing
Brand: Adafruit
SKU: ADA3650
Price: 10.85 GBP
Availability: OutOfStock

by Adafruit

The INA219 FeatherWing makes power-monitoring problems a thing of the past.

Instead of struggling with two multimeters, you can just use the handy INA219B chip on this breakout to both measure both the high side voltage and DC current draw over I2C with 1% precision. Works with any and all Feathers! Communicates over I2C so its super-simple to use, you can even change the I2C address to have up to 4 of these Wings on one Feather.

Please Note: As of Oct 2022, due to the severe chip shortage, Adafruit have had to update this design to use either the INA219A or INA219B and in SOT-23 or SOIC package - whatever they are able to get on the market! The A version is ±1% total max current measurement error over the entire temp range (±0.5% max at 25*C) and the B version is ±0.5% total max current measurement error over the entire temp range (±0.3% max at 25*C). Overall functionality is otherwise the same.

Many current-measuring devices are only good for low side measuring. That means that unless you want to get a battery involved, you have to stick the measurement resistor between the target ground and true ground. This can cause problems with circuits since electronics tend to not like it when the ground references change and move with varying current draw. This chip is much smarter - it can handle high side current measuring, up to +26VDC, even though it is powered with 3.3V. It will also report back that high side voltage, which is great for tracking battery life or solar panels.

A precision amplifier measures the voltage across the 0.1 ohm, 1% sense resistor. Since the amplifier maximum input difference is ±320mV this means it can measure up to ±3.2 Amps. With the internal 12 bit ADC, the resolution at ±3.2A range is 0.8mA. With the internal gain set at the minimum of div-8, the max current is ±400mA and the resolution is 0.1mA. Advanced hackers can remove the 0.1 ohm current sense resistor and replace it with their own to change the range (say a 0.01 ohm to measure up 32 Amps with a resolution of 8mA)

Adafruit have a detailed tutorial for the INA219 that will do all the gain, range and math for you - just plug and go with Arduino or CircuitPython!

Technical Details

Revision History:

Please Note: As of October 2022, due to the severe chip shortage, Adafruit have had to update this design to use either the INA219A or INA219B and in SOT-23 or SOIC package - whatever they are able to get on the market! The A version is ±1% total max current measurement error over the entire temp range (±0.5% max at 25*C) and the B version is ±0.5% total max current measurement error over the entire temp range (±0.3% max at 25*C). Overall functionality is otherwise the same.

Product Dimensions: 51.0mm x 22.8mm x 3.6mm / 2.0" x 0.9" x 0.1"

Product Weight: 3.4g / 0.1oz

The INA219 FeatherWing makes power-monitoring problems a thing of the past.

ADA3650

This product is no longer available

It's sad to say goodbye but sometimes we have to retire products to make way for new things.

SKU

ADA3650

EAN

0606034876422

Brand

Adafruit

Stock available

0 units
Backorder not allowed on this product

Weight

Adafruit INA219 FeatherWing

This product is no longer available

Video introduction

Guides & tutorials

Search

Select currency

This product is no longer available

Video introduction

Guides & tutorials