SparkFun Servo pHAT for Raspberry Pi

Name: SparkFun Servo pHAT for Raspberry Pi
Brand: Sparkfun
SKU: DEV-15316
Price: 15,48 GBP
Availability: OutOfStock

by Sparkfun

The SparkFun Servo pHAT for Raspberry Pi allows your Raspberry Pi to control up to 16 servo motors in a straightforward and uncomplicated manner via an I²C connection.

Thanks to its I²C capabilities, this PWM HAT saves the Raspberry Pi's GPIO pins, allowing you to use them for other purposes. The Servo pHAT also adds a serial terminal connection, which will allow you to bring up a Raspberry Pi without having to hook it up to a monitor and keyboard. SparkFun have provided a Qwiic connector for easy interfacing with the I²C bus using the Qwiic system, and a 4-pin header specifically for connecting to the Sphero RVR.

Power to the SparkFun Servo pHAT can be supplied through USB-C connector. This will power either the servo motors only, or power the servo motors as well as the Raspberry Pi that is connected to the HAT. SparkFun switched to USB-C to allow you to bring more current to your servos than ever before. This USB-C connector can also be used to hook up the Pi via serial port connection to avoid having to use a monitor and keyboard for setting up the Pi. To supply power only to the servo power rail (and not the Pi's 5V power rail), you just need to cut a small trace on the isolation jumper. Doing this allows you to drive heavier loads coming from multiple or larger servos. They've even added power protection circuits to the design, to avoid damage to power sources.

Each of this pHAT's 16 servo motor pin headers has been spaced out to the standard 3-pin servo pinout (ground, 5V, signal) to make it easier to attach your servo motors. The Servo pHAT is the same size and form factor as a Raspberry Pi Zero and Zero W, but it can also operate with a regular Raspberry Pi (not yet tested on the Raspberry Pi 4).

Note: This HAT includes headers to connect to a Raspberry Pi, so there is no soldering required to get up and running quickly.

Get started with the SparkFun Servo pHAT Guide

Features

16 PWM channels, controllable over I²C
Qwiic connector
4-pin RVR header for connection to Sphero RVR
USB-C connector
40-pin GPIO header for connection to Raspberry Pi
CH340C USB Serial SOIC16
Updated logic level conversion circuitry
Power protection circuits

Documents

The SparkFun Servo pHAT for Raspberry Pi allows your Raspberry Pi to control up to 16 servo motors in a straightforward and uncomplicated manner via an I2C connection.

DEV-15316

This product is no longer available

It's sad to say goodbye but sometimes we have to retire products to make way for new things.

SKU

DEV-15316

EAN

845156009695

Brand

Sparkfun

Stock available

0 units
Backorder not allowed on this product

Weight

21g

SparkFun Servo pHAT for Raspberry Pi

This product is no longer available

Video introduction

Guides & tutorials

Search

Select currency

This product is no longer available

Video introduction

Guides & tutorials