{"title":"Pimoroni Originals","description":"","products":[{"product_id":"omnivesa","title":"OmniVESA","description":"\u003cp\u003eThe perfect mounting solution for your Raspberry Pi!\u003c\/p\u003e\n\u003cp\u003eSimply remove the protective backing from the OmniVESA and follow the instructions below to mount your Raspberry Pi either bare or in any of the most popular cases.\u003c\/p\u003e\n\u003cp\u003eThe nylon screws provided are long enough to work with all of the relevant cases, though if you find they are protruding too far from the case of your choice you can easily trim them down using some \u003ca href=\"https:\/\/shop.pimoroni.com\/products\/precision-micro-nippers\" target=\"_blank\" title=\"cutting pliers\" rel=\"noopener noreferrer\"\u003ecutting pliers\u003c\/a\u003e. Just remember to use eye protection when cutting!\u003c\/p\u003e\n\u003cp\u003eThe OmniVESA supports 75mm and 100mm spacing mounts\u003c\/p\u003e\n\u003ch2\u003eKit contains\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x OmniVESA\u003c\/li\u003e\n\u003cli\u003e2 x \u003cspan\u003eM4 16mm Nylon Knurled Thumbscrews\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2 x 5mm Nylon Spacers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2 x M2.5 x 16 nylon screw\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3 x M2.5 nuts\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi\u003c\/strong\u003e \u003cstrong\u003euncased\u003c\/strong\u003e - use the nylon bolts provided to attach the Pi to the VESA mount using the mounting holes on the Pi itself\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/Mount_example_5_of_7_large.JPG?37327\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/Mount_example_7_of_7_large.JPG?37327\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/shop.pimoroni.com\/products\/raspberry-pi-model-a-with-coupe-royale-pibow\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003eRaspberry Pi Model A+ in Coupé Royale Pibow\u003c\/strong\u003e\u003c\/a\u003e - use the screws provided to attach the OmniVESA under the base layer of the Pibow as shown\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/Mount_example_6_of_7_large.JPG?37327\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/shop.pimoroni.com\/products\/raspberry-pi-model-b-with-pibow\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003eRaspberry Pi Model A\/B\/B+ in Pibow\u003c\/strong\u003e\u003c\/a\u003e - \u003cspan\u003euse the screws provided to attach the OmniVESA under the base layer of the Pibow as shown\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/Mount_example_8bc35b94-bf2a-4088-b49d-25effad2bf36_large.JPG?37332\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi Model B+ in ModMyPi\/Cyntech case\u003c\/strong\u003e - the metal screws provided with the case to secure it together will also allow the OmniVESA to be mounted on the base as shown\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/Mount_example_2_of_7_large.JPG?37330\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi Model B+ in FLIRC case\u003c\/strong\u003e - replace two of the metal screws usually used to secure the case together with the two nylon bolts provided with the OmniVESA and use them to secure the case together with the OmiVESA attached to the base\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/Mount_example_3_of_7_large.JPG?37327\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi Model B+ in One Nine Design case\u003c\/strong\u003e - The base of the case has two recessed mounting holes you can use to mount the case to the OmniVESA using the nylon screws provided before you put the Pi in the case.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/Mount_example_1_of_7_large.JPG?37329\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi Model B in ModMyPi case\u003c\/strong\u003e - two holes in the base will allow an OmniVESA to be mounted under the case using the nylon bolts provided\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/OmniVESA_MMP_B_c6d17878-31ae-4d15-9090-e9646e812de1_large.JPG?37335\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi Model B in Cyntech Case\u003c\/strong\u003e - \u003cspan\u003e the metal screws provided with the case to secure it together will also allow the OmniVESA to be mounted on the base as shown\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/Mount_example_4_of_7_large.JPG?37328\"\u003e\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":1206318464,"sku":"PIM011","price":3.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/OmniVESA_-_in_situ.jpeg?v=1571270021"},{"product_id":"explorer-hat","title":"Explorer HAT Pro","description":"\u003cp\u003eExplorer HAT Pro adds a lot of useful tools to your Raspberry Pi.\u003c\/p\u003e\n\u003cp\u003eIt has digital inputs and outputs, capacitive touch pads, croc. clip compatible pads, coloured LEDs, analog inputs, motor drivers, and a mini breadboard for prototyping your projects\u003c\/p\u003e\n\u003cp\u003eGreat for little robots, games, science experiments, exploring small electronic circuits, and interacting with you Pi.\u003c\/p\u003e\n\u003cp\u003eWe've put together a handy little \u003ca href=\"\/en-eu\/products\/explorer-hat-pro-parts-kit\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eExplorer HAT Pro parts kit\u003c\/a\u003e with everything you need to get started building circuits including LEDs, dials, a buzzer, and even a temperature sensor! Explorer HAT Pro also goes great with our no-soldering-required \u003ca href=\"\/en-eu\/products\/micro-metal-gearmotor-with-motor-shim\" target=\"_blank\" rel=\"noopener noreferrer\"\u003emicro metal gearmotors\u003c\/a\u003e and our \u003ca href=\"\/en-eu\/products\/sts-pi\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSTS-Pi robot kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFour buffered 5V tolerant inputs (perfect for Arduino compatibility)\u003c\/li\u003e\n\u003cli\u003eFour powered 5V outputs (up to 500mA total across all four channels)\u003c\/li\u003e\n\u003cli\u003eFour capacitive touch pads (labelled 1, 2, 3, 4)\u003c\/li\u003e\n\u003cli\u003eFour capacitive crocodile clip pads (labelled 5, 6, 7, 8)\u003c\/li\u003e\n\u003cli\u003eFour coloured LEDs (red, green, blue, and yellow)\u003c\/li\u003e\n\u003cli\u003eFour analog inputs\u003c\/li\u003e\n\u003cli\u003eTwo H-bridge motor drivers (up to 200mA per channel; soft PWM control)\u003c\/li\u003e\n\u003cli\u003eA heap of useful (unprotected) 3v3 goodies from the GPIO\u003c\/li\u003e\n\u003cli\u003eA mini breadboard on top!\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/pinout.xyz\/pinout\/explorer_hat_pro\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eExplorer HAT Pro pinout\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with all 40-pin header Raspberry Pi models\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/explorer-hat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePython library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eComes fully assembled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eWe've made it super-quick to get to grips with Explorer HAT Pro with our \u003ca href=\"https:\/\/github.com\/pimoroni\/explorer-hat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePython library\u003c\/a\u003e, including a bunch of examples to show off all of Explorer HAT Pro's functions.\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe inputs use a 5-channel buffer that will accept anything from 2V-5V as logic high\u003c\/li\u003e\n\u003cli\u003eMini breadboard had 170 points, 17x5 per half of the breadboard\u003c\/li\u003e\n\u003cli\u003eDue to exciting global electronic parts shortages, some Explorer Hat Pros manufactured in 2021 have an \u003ca href=\"https:\/\/www.ti.com\/lit\/ds\/symlink\/ads1115.pdf\" target=\"_blank\" rel=\"noopener noreferrer\" data-mce-href=\"https:\/\/www.ti.com\/lit\/ds\/symlink\/ads1115.pdf\"\u003eADS1115\u003c\/a\u003e ADC instead of the usual \u003ca href=\"https:\/\/www.ti.com\/lit\/ds\/symlink\/ads1015.pdf\" target=\"_blank\" rel=\"noopener noreferrer\" data-mce-href=\"https:\/\/www.ti.com\/lit\/ds\/symlink\/ads1015.pdf\"\u003eADS1015\u003c\/a\u003e. Our Python libraries have been updated to automatically detect and adjust for this chip change.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":1231306476,"sku":"PIM082","price":18.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Explorer_HAT_Pro_1_of_3.JPG?v=1576145827"},{"product_id":"breadboard-base-for-pibow","title":"Breadboard Base for Pibow","description":"\u003cp\u003eSecure prototyping space for your Raspberry Pi, now Pi Zero compatible!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with the \u003ca href=\"\/en-eu\/products\/pibow-for-raspberry-pi-3\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePibow\u003c\/a\u003e, \u003ca href=\"\/en-eu\/products\/pibow-coupe-for-raspberry-pi-3\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePibow Coupé\u003c\/a\u003e and \u003ca href=\"\/en-eu\/products\/pibow-zero-w\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePibow Zero\u003c\/a\u003e, this just replaces the bottom layer!\u003c\/li\u003e\n\u003cli\u003eAdditional mounting points for the uncased Pi\u003c\/li\u003e\n\u003cli\u003eSpace for one \u003ca href=\"\/en-eu\/products\/solderless-breadboard-400-point\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e400-point\u003c\/a\u003e or two \u003ca href=\"\/en-eu\/products\/colourful-mini-breadboard\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e170-point\u003c\/a\u003e breadboards (not included)\u003c\/li\u003e\n\u003cli\u003eCompact design makes it ideal to work with our \u003ca href=\"\/en-eu\/products\/jumper-jerky-junior\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ejumper jerky junior\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSo handy!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note that this product is just the base layer, the Raspberry Pi, Pibow and breadboards are all sold separately\u003c\/em\u003e\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":1231307052,"sku":"PIM086","price":4.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Breadboard_base_1_of_2.JPG?v=1576144670"},{"product_id":"piglow","title":"PiGlow","description":"\u003cp\u003ePiGlow is a spiral nebula of 18 coloured, individually-controllable LEDs for your Raspberry Pi. Use it for all sorts of things. And, of course, it fits inside a \u003ca href=\"\/en-eu\/products\/pibow-for-raspberry-pi-3-b-plus\" target=\"_blank\"\u003ePibow case\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003eThis diminutive board is compatible with all 40-pin Raspberry Pi models, and can be controlled really simply with our \u003ca href=\"https:\/\/github.com\/pimoroni\/piglow\" target=\"_blank\"\u003ePiGlow Python library\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eUse PiGlow for mood lighting \/ ambience, monitoring the status of your system, scripts, or daemons, Twitter mentions or emails, VESA-mounted behind your monitor or TV, or a zillion other things!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e18 coloured LEDs (3x each red, orange, yellow, green, blue, white)\u003c\/li\u003e\n\u003cli\u003eDriven by the SN3218 8-bit, 18-channel PWM LED driver\u003c\/li\u003e\n\u003cli\u003eUses I2C (address 0x54)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/pinout.xyz\/pinout\/piglow\" target=\"_blank\"\u003ePiGlow pinout\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with all 40-pin header Raspberry Pi models\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/piglow\" target=\"_blank\"\u003ePython library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eComes fully assembled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eOur \u003ca href=\"https:\/\/github.com\/pimoroni\/piglow\" target=\"_blank\"\u003ePiGlow Python library\u003c\/a\u003e makes controlling PiGlow a piece of cake. You can control the brightness of the different colour groups of LEDs, the arms of the nebula, or individual LEDs - flexible! There's also a \u003ca href=\"https:\/\/github.com\/pimoroni\/piglow\/tree\/master\/examples\" target=\"_blank\"\u003ehandful of examples\u003c\/a\u003e to show you what can be done.\u003c\/p\u003e\n\u003ch2\u003eCommunity software\u003c\/h2\u003e\n\u003cp\u003eA bunch of awesome folk have contributed code for PiGlow. Here's just some of it:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGordon Henderson\u003c\/strong\u003e has added a \u003cstrong\u003ePiGlow driver for wiringPi\u003c\/strong\u003e that you can find here: \u003ca href=\"http:\/\/wiringpi.com\/dev-lib\/piglow\/\" target=\"_blank\"\u003ehttp:\/\/wiringpi.com\/dev-lib\/piglow\/\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimon Walters\u003c\/strong\u003e has added\u003cstrong\u003e PiGlow support for Scratch\u003c\/strong\u003e: \u003ca href=\"http:\/\/cymplecy.wordpress.com\/2013\/08\/12\/scratch-gpio-piglow-support\/\" target=\"_blank\"\u003ehttp:\/\/cymplecy.wordpress.com\/\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJason Barnett\u003c\/strong\u003e has put together a \u003cstrong\u003egreat Python class and a load of samples\u003c\/strong\u003e: \u003ca href=\"https:\/\/github.com\/Boeeerb\/PiGlow\" target=\"_blank\"\u003ehttps:\/\/github.com\/Boeeerb\/PiGlow\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBen Lebherz\u003c\/strong\u003e has forked Jason's project and \u003cstrong\u003etidied up the code a bit while adding gamma correction\u003c\/strong\u003e: \u003ca href=\"https:\/\/github.com\/benleb\/PyGlow\" target=\"_blank\"\u003ehttps:\/\/github.com\/benleb\/PyGlow\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManuel Ernst\u003c\/strong\u003e has created a \u003cstrong\u003eNode.js library\u003c\/strong\u003e: \u003ca href=\"https:\/\/github.com\/zaphod1984\/node-piglow\" target=\"_blank\"\u003ehttps:\/\/github.com\/zaphod1984\/node-piglow\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFalldeaf\u003c\/strong\u003e has put together a nice XBMC hack to use the \u003cstrong\u003ePiGlow as a status indicator\u003c\/strong\u003e: \u003ca href=\"http:\/\/falldeaf.com\/2013\/11\/the-xbmc-piglow-information-display-addon\/\" target=\"_blank\"\u003ehttp:\/\/falldeaf.com\/2013\/11\/the-xbmc-piglow-information-display-addon\/\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJonathan Stowe\u003c\/strong\u003e has created a \u003cstrong\u003emodule for the Perl divers among you\u003c\/strong\u003e: \u003ca href=\"https:\/\/metacpan.org\/release\/JSTOWE\/Device-PiGlow-1.0\" target=\"_blank\"\u003ehttps:\/\/metacpan.org\/release\/JSTOWE\/Device-PiGlow-1.0\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eToon Schoenmakers \u003c\/strong\u003ehas gone as far as making a \u003cstrong\u003elibrary for Golang\u003c\/strong\u003e: \u003ca href=\"https:\/\/github.com\/schoentoon\/piglow\" target=\"_blank\"\u003ehttps:\/\/github.com\/schoentoon\/piglow\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBruce Beisel\u003c\/strong\u003e has created a \u003cstrong\u003eJava package\u003c\/strong\u003e (with GUI simulator and example applications): \u003ca href=\"https:\/\/github.com\/brucebeisel\/PiGlow4J\" target=\"_blank\"\u003ehttps:\/\/github.com\/brucebeisel\/PiGlow4J\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRobert Peake\u003c\/strong\u003e has made a simple, mobile-friendly, web-based interface, the \u003cstrong\u003ePiGlow Web Controller\u003c\/strong\u003e : \u003ca href=\"https:\/\/github.com\/cyberscribe\/piglowweb\" target=\"_blank\"\u003ehttps:\/\/github.com\/cyberscribe\/piglowweb\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJoris Vervuurt\u003c\/strong\u003e has created a lightweight \u003cstrong\u003eNode.js module\u003c\/strong\u003e: \u003ca href=\"https:\/\/github.com\/jorisvervuurt\/jvspiglow\" target=\"_blank\"\u003ehttps:\/\/github.com\/jorisvervuurt\/jvspiglow\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhoto-sensitivity warning:\u003c\/strong\u003e flashing, strobing, and patterns of lights may cause epileptic seizures. Always take care and immediately stop using if you feel unwell (dizziness, nausea, affected vision, eye twitching, disorientation).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":43850061896,"sku":"PIM013","price":9.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/PiGlow.jpeg?v=1571270022"},{"product_id":"raspberry-pi-camera-mount","title":"Raspberry Pi Camera Mount","description":"\u003cp\u003eA stylish, small, and adjustable mount for your Pi Camera (v1 or v2).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAllows four different angles of repose.\u003c\/li\u003e\n\u003cli\u003eFour screws to secure your camera\u003c\/li\u003e\n\u003cli\u003eMade from lush matte black acrylic\u003c\/li\u003e\n\u003cli\u003e1\/4 inch hole for tripod mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow about some \u003ca href=\"https:\/\/learn.pimoroni.com\/article\/assembling-camera-mount\" title=\"Camera Mount Assembly Instructions\" rel=\"noopener\" target=\"_blank\"\u003eassembly instructions and useful tips\u003c\/a\u003e?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note that this camera mount is not compatible with Raspberry Pi Camera Module 3.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":1231312324,"sku":"PIM012","price":3.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Camera_Mount_2_of_3.JPG?v=1571270022"},{"product_id":"skywriter-hat","title":"Skywriter HAT","description":"\u003cp\u003eUse this 3D interface to sense things floating in the air over it. Detect swipes and the motion of your hand with X, Y and Z positions.\u003c\/p\u003e\n\u003cp\u003eSkywriter HAT uses electrical near-field 3D sensing to generate positional data and detect common gestures like flicks and taps.\u003c\/p\u003e\n\u003cp\u003eUse it to control your presentations like a Jedi, make a theremin to amaze and annoy all, or make a lock controlled by a magic spell!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eElectrical near-field 3D\/gesture sensing\u003c\/li\u003e\n\u003cli\u003e4-layer PCB for best sensing performance\u003c\/li\u003e\n\u003cli\u003eRange of up to 5cm\u003c\/li\u003e\n\u003cli\u003eFull 3D position data and gesture information (flicks, taps)\u003c\/li\u003e\n\u003cli\u003eUses the Microchip MGC3130 sensor\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/pinout.xyz\/pinout\/skywriter_hat\"\u003eSkywriter HAT pinout\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with all 40-pin header Raspberry Pi models\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/skywriter-hat\"\u003ePython library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eComes fully assembled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eWe've put together a \u003ca href=\"https:\/\/github.com\/pimoroni\/skywriter-hat\"\u003eSkywriter HAT Python library\u003c\/a\u003e to take all the hard work out of reading Skywriter HAT's positional data and gestures, along with some examples to help you get started.\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cp\u003eBecause the sensing distance is up to 5cm you can mount Skywriter HAT behind a sheet of non-conductive material (like acrylic or fabric) and completely hide it inside your project!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ciframe class=\"vine-embed\" src=\"https:\/\/vine.co\/v\/OrUWTdd0Hlg\/embed\/simple\" width=\"320\" height=\"320\" frameborder=\"0\"\u003e\u003c\/iframe\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":1231315584,"sku":"PIM058","price":16.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Skywrtier_1_of_3.jpeg?v=1571270022"},{"product_id":"piano-hat","title":"Piano HAT","description":"\u003cp\u003eUnlock your inner Mozart with Piano HAT, a mini musical companion for your Raspberry Pi!\u003c\/p\u003e\n\u003cp\u003ePiano HAT is inspired by Zachary Igielman's PiPiano and made with his blessing. We've taken his fabulous idea for a dinky piano add-on for the Raspberry Pi, made it touch-sensitive and added barrels of our trademark Pimoroni polish.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003ePlay music in Python, control software synths on your Pi, and take control of hardware synthesizers!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.recantha.co.uk\/blog\/?p=13187\"\u003eMichael Horne\u003c\/a\u003e said \u003cem\u003e\"The Piano HAT is, as far as electronics goes, a work of art. It looks slick, feels slick and, with the software library included, acts slick.\"\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.raspberrypi.org\/magpi-issues\/MagPi38.pdf\"\u003eThe MagPi\u003c\/a\u003e said Piano HAT was \u003cem\u003e\"a great way to unleash your ivory-tinkling tendencies\"\u003c\/em\u003e \u003ca href=\"https:\/\/www.raspberrypi.org\/magpi-issues\/MagPi37.pdf\"\u003eand\u003c\/a\u003e \u003cem\u003e\"a board \u003c\/em\u003e\u003cem\u003efor musical adventures\"\u003c\/em\u003e.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e16 capacitive touch pads (link each to their own Python function!)\u003c\/li\u003e\n\u003cli\u003e13 piano keys (a full octave)\u003c\/li\u003e\n\u003cli\u003eOctave up\/down buttons\u003c\/li\u003e\n\u003cli\u003eInstrument cycle button (great for use with synthesizers)\u003c\/li\u003e\n\u003cli\u003e16 bright white LEDs (let them light automagically, or take control with Python)\u003c\/li\u003e\n\u003cli\u003e2x Microchip CAP1188 capacitive touch driver chips\u003c\/li\u003e\n\u003cli\u003eUse it to control software or hardware synths over MIDI\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/pinout.xyz\/pinout\/piano_hat\"\u003ePiano HAT pinout\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with all 40-pin header Raspberry Pi models\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/Piano-HAT\"\u003ePython library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eComes fully assembled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eWe've made an ever-so-thorough \u003ca href=\"https:\/\/github.com\/pimoroni\/Piano-HAT\"\u003ePython library\u003c\/a\u003e to control Piano HAT, with a bunch of nifty examples to let you explore its functionality.\u003c\/p\u003e\n\u003cp\u003eThere's a learn to play example that let's you play along as Piano HAT's LEDs show you which keys to press. In no time, you'll be a Chopin for the 21st century.\u003c\/p\u003e\n\u003cp\u003eWe've included a MIDI example that lets you play music with \u003ca href=\"http:\/\/www.warmplace.ru\/soft\/sunvox\/\"\u003eSunvox,\u003c\/a\u003e \u003ca href=\"http:\/\/yoshimi.sourceforge.net\/\"\u003eYoshimi\u003c\/a\u003e and other software synths, a PyGame example with glorious piano and drum samples and even a true 8-bit synth written in pure Python!\u003c\/p\u003e\n\u003cp\u003eYou can even make Piano HAT output regular MIDI commands via a USB to MIDI adapter and use Piano HAT as a tiny, cheap MIDI controller for your Minimoog Model D (you have one right?).\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":3925148036,"sku":"PIM095","price":15.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Piano_HAT_4_of_4.jpeg?v=1571270050"},{"product_id":"raspberry-pi-7-touchscreen-display-frame","title":"Pibow Frame for Raspberry Pi 7\" Touchscreen Display","description":"\u003cp\u003eProtect your lovely 7\" Raspberry Pi Touchscreen with this lovely display frame!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3 unique layers provide support and protection to the back of the screen\u003c\/li\u003e\n\u003cli\u003e2 legs hold your screen at an ideal viewing angle\u003c\/li\u003e\n\u003cli\u003eTouchscreen left entirely unimpeded\u003c\/li\u003e\n\u003cli\u003eAll Raspberry Pi ports accessible\u003c\/li\u003e\n\u003cli\u003elayers screw directly into the back of the screen with supplied bolt pack\u003c\/li\u003e\n\u003cli\u003eNo tools required for assembly\u003c\/li\u003e\n\u003cli\u003eAvailable in classic Noir Black or sporty Coupe Red colourways.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eDownload build instructions for \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/how_to_assemble_the_rpi_touchscreen_display.jpg?14903340043104331728\" target=\"_blank\"\u003ethe screen\u003c\/a\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/Pimoroni_Display_Frame_Instructions_V1.1.pdf?v=1637762445\" rel=\"noopener noreferrer\" target=\"_blank\"\u003edisplay frame\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eNotes\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-eu\/products\/raspberry-pi-7-touchscreen-display-with-frame\" rel=\"noopener\" target=\"_blank\"\u003eRaspberry Pi 7\" Touchscreen Display\u003c\/a\u003e and Raspberry Pi are not included\u003c\/strong\u003e. This is the display mount only.\u003c\/li\u003e\n\u003cli\u003eThis Frame \u003cstrong\u003ewon't fit \u003ca href=\"\/en-eu\/products\/raspberry-pi-touch-display-2\" rel=\"noopener\" target=\"_blank\"\u003eRaspberry Pi Touch Display 2\u003c\/a\u003e\u003c\/strong\u003e - the dimensions are different.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Coupé Red","offer_id":5004049732,"sku":"PIM120","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"Noir","offer_id":5004049860,"sku":"PIM122","price":11.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Touchscreen_group_1200.jpeg?v=1571270053"},{"product_id":"explorer-hat-pro-parts-kit","title":"Explorer HAT Pro Parts Kit","description":"\u003cp\u003eEverything you need to get started with \u003ca href=\"\/en-eu\/products\/explorer-hat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eExplorer HAT Pro\u003c\/a\u003e or \u003ca href=\"\/en-eu\/products\/explorer-phat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eExplorer pHAT\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003eThe parts kit contains LEDs, a buzzer, resistors and capacitors, rotary potentiometers (dials), a shift register, jumper wires, and even an analog temperature sensor!\u003c\/p\u003e\n\u003cp\u003eUse the parts kit to build a PIN entry system, traffic lights, a visual thermometer, or an all-singing all-dancing blinky light show with the shift register's eight output channels that are perfect for controlling LEDs.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e16x LEDS - 4 of each yellow, red, blue and green\u003c\/li\u003e\n\u003cli\u003e1x piezo transducer (can be used as a buzzer)\u003c\/li\u003e\n\u003cli\u003e10x 470 Ohm resistors\u003c\/li\u003e\n\u003cli\u003e5x 10k Ohm resistors for pulling up Explorer HAT Pro’s outputs\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-eu\/products\/pt10lv-horizontal-trimmer-multiple-values\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e2x 10k rotary potentiometers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-eu\/products\/shift-register-8-bit-74hc595\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e1x SN74HC595N shift register\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-eu\/products\/ceramic-capacitors\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e2x 0.1uF ceramic capacitor\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-eu\/products\/temperature-sensor-tmp36\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e1x TMP36 analog temperature sensor\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-eu\/products\/jumper-jerky-junior\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e20-way male to male jumper jerky junior (100mm long)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":6311140804,"sku":"PIM089","price":11.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/EHP_Parts_Kit_v2.jpeg?v=1571270053"},{"product_id":"explorer-phat","title":"Explorer pHAT","description":"\u003cp\u003eExplorer pHAT is the perfect prototyping side-kick for your Raspberry Pi!\u003c\/p\u003e\n\u003cp\u003eA more diminutive version of our popular \u003ca href=\"\/en-eu\/products\/explorer-hat\"\u003eExplorer Hat Pro\u003c\/a\u003e, it's cheaper and designed to fit perfectly on a Raspberry Pi Zero!\u003c\/p\u003e\n\u003cp\u003eWe've added a heap of useful input and output options that will take your projects to the next level. Great for driving motors, using analog sensors, and interfacing with 5V systems (like Arduino).\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003ePerfect for building a tiny robot, or use it with our \u003ca href=\"https:\/\/shop.pimoroni.com\/products\/explorer-hat-pro-parts-kit\"\u003eExplorer HAT Pro parts kit\u003c\/a\u003e to prototype all sorts of circuits with its LEDs, analog dials, and temperature sensor.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFour buffered 5V tolerant inputs (perfect for Arduino compatibility)\u003c\/li\u003e\n\u003cli\u003eFour powered 5V outputs (up to 500mA total across all four channels)\u003c\/li\u003e\n\u003cli\u003eFour analog inputs\u003c\/li\u003e\n\u003cli\u003eTwo H-bridge motor drivers (up to 200mA per channel; soft PWM control)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/pinout.xyz\/pinout\/explorer_phat\"\u003eExplorer pHAT pinout\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with all 40-pin header Raspberry Pi models\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/explorer-hat\"\u003ePython library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFemale headers require soldering\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eExplorer pHAT uses the same easy-to-use \u003ca href=\"https:\/\/github.com\/pimoroni\/explorer-hat\"\u003ePython library\u003c\/a\u003e as Explorer HAT Pro, that includes a bunch of examples to demonstrate Explorer pHAT's functions.\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cp\u003eThe inputs use a 5-channel buffer that will accept anything from 2V-5V as logic high.\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":11847622276,"sku":"PIM137","price":11.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/top.jpeg?v=1571270054"},{"product_id":"mini-black-hat-hack3r","title":"Mini Black HAT Hack3r","description":"\u003cp\u003eNeed to detach or debug your HAT? Then the Mini Black HAT Hack3r is for you!\u003c\/p\u003e\n\u003cp\u003eA nifty little tool that lets you access all of the GPIO pins while also running a HAT. Ideal for debugging your HAT projects or combining a HAT with other circuits.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHAT and pHAT landing areas with PCB standoffs\u003c\/li\u003e\n\u003cli\u003eIncludes 40 pin GPIO ribbon cable\u003c\/li\u003e\n\u003cli\u003eAll GPIO pins labelled with function, BCM pin number, physical pin number\u003c\/li\u003e\n\u003cli\u003eRubber non-slip feet\u003c\/li\u003e\n\u003cli\u003e4 mounting holes\u003c\/li\u003e\n\u003cli\u003eComes assembled or in kit form\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe made this for ourselves when debugging new HAT designs but found it so gosh-darn useful that we thought you might like it too!\u003c\/p\u003e\n\u003ch2\u003eKits include\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBlack HAT Hack3r PCB\u003c\/li\u003e\n\u003cli\u003e40-way black GPIO ribbon cable\u003c\/li\u003e\n\u003cli\u003e3 x 40-way pin header (pre-installed on the assembled version)\u003c\/li\u003e\n\u003cli\u003e4 x PCB standoff for HAT mounting\u003c\/li\u003e\n\u003cli\u003e4 x rubber non-slip feet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Fully Assembled","offer_id":17954317252,"sku":"PIM169","price":11.0,"currency_code":"GBP","in_stock":true},{"title":"Solder Yourself Kit","offer_id":17954317380,"sku":"PIM170","price":8.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Mini_Black_HAT_Hack3r_4_of_4_grande_07424851-dfb8-4a64-ad58-25aa498e9284.jpeg?v=1571270068"},{"product_id":"pibow-zero-ver-1-3","title":"Pibow Zero Case for Raspberry Pi Zero version 1.3","description":"\u003cp\u003eThe Raspberry Pi Zero has been upgraded to include a camera port, display it with pride in this eye-catching new Pibow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003ethis is the case for the \u003ca href=\"\/en-eu\/products\/raspberry-pi-zero\"\u003eRaspberry Pi Zero v1.3\u003c\/a\u003e only. This case is not compatible with the Pi Zero W or the Pi Zero v1.2 (without camera connector). Does not include a Raspberry Pi Zero v1.3!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.pimoroni.com\/tutorial\/sandyj\/pibow-zero-assembly\"\u003eWe've got a tutorial showing you how to build your Pibow here.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with \u003ca href=\"\/en-eu\/products\/raspberry-pi-zero\"\u003eRaspberry Pi Zero v1.3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuper-slimline profile\u003c\/li\u003e\n\u003cli\u003eFully HAT\/pHAT compatible\u003c\/li\u003e\n\u003cli\u003eProtects your beloved Pi Zero!\u003c\/li\u003e\n\u003cli\u003eClear top and base leave Raspberry Pi Zero visible\u003c\/li\u003e\n\u003cli\u003eGPIO cut-out\u003c\/li\u003e\n\u003cli\u003eLeaves all ports accessible (encloses micro-SD)\u003c\/li\u003e\n\u003cli\u003eMade from lightweight high-quality cast acrylic\u003c\/li\u003e\n\u003cli\u003eGreat for hacking and tinkering!\u003c\/li\u003e\n\u003cli\u003eMade in Sheffield, UK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCrafted out of four unique layers including a transparent top and base that leave your beautiful Pi visible inside. Each layer is laser-cut from colourful high-quality cast acrylic and once stacked they securely contain a Raspberry Pi Zero while leaving the primary ports and GPIO accessible.\u003c\/p\u003e\n\u003cp\u003eThis case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly.\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":19200160580,"sku":"PIM172","price":5.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Pibow_Zero_ver_1.3_1_of_3.jpeg?v=1571270069"},{"product_id":"blinkt","title":"Blinkt!","description":"\u003cp\u003eEight super-bright RGB LED indicators that are ideal for adding visual notifications to your Raspberry Pi without breaking the bank!\u003c\/p\u003e\n\u003cp\u003eInspired by \u003ca href=\"http:\/\/blog.alexellis.io\/visiting-pimoroni\/\" target=\"_blank\"\u003eAlex Ellis' work with his Raspberry Pi Zero Docker Cluster\u003c\/a\u003e, we developed these boards for him to use as status indicators. Blinkt! offers eight APA102 pixels in the smallest (and cheapest) form factor to plug straight onto your Raspberry Pi.\u003c\/p\u003e\n\u003cp\u003eEach pixel on Blinkt! is individually controllable and dimmable allowing you to create gradients, pulsing effects, or just flash them on and off like crazy. The data and clock lines are connected to GPIO #23 and #24 respectively but for simplicity you can just use our Python library to drive them.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEight APA102 RGB LEDs\u003c\/li\u003e\n\u003cli\u003eIndividually controllable pixels\u003c\/li\u003e\n\u003cli\u003eSits directly on top of your Pi in a tiny footprint\u003c\/li\u003e\n\u003cli\u003eFits inside most Pi cases\u003c\/li\u003e\n\u003cli\u003eDoesn't interfere with PWM audio\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/pinout.xyz\/pinout\/blinkt\"\u003eBlinkt! pinout\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with all 40-pin header Raspberry Pi models\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/blinkt\"\u003ePython library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eComes fully assembled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eOur \u003ca href=\"https:\/\/github.com\/pimoroni\/blinkt\"\u003eBlinkt! Python library\u003c\/a\u003e will have you blasting out rainbows in two shakes of a unicorn's tail! There's a stack of examples too, from binary clocks to cheerlights and flickering candles to Larson scanners!\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBe careful to plug in your Blinkt! the correct way round, it has curves on the top that match the corners of your Raspberry Pi\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eIf you want to access the rest of the GPIO at the same time as using Blinkt! then our \u003ca href=\"\/en-eu\/products\/mini-black-hat-hack3r\" target=\"_blank\"\u003eMini Black HAT Hack3r\u003c\/a\u003e is the ideal accompaniment, allowing you to combine Blinkt! with another HAT or pHAT, or just prototype using the GPIO pins for your own project\u003c\/li\u003e\n\u003cli\u003eThe dimensions of Blinkt! are 65mm long x 8mm wide x 8.5mm thick (thickness includes header and pixels)\u003c\/li\u003e\n\u003cli\u003eAdditional accessories shown in photos not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe featured Blinkt! on a special episode of Bilge Tank where we tried to come up with as many different code examples as possible in one morning. \u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":20876980868,"sku":"PIM184","price":5.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Blinkt_67c0ebde-d0ab-474f-be1a-3a05b1e35489.jpeg?v=1571270069"},{"product_id":"lipo-shim","title":"LiPo Shim (formerly Zero LiPo)","description":"\u003cp\u003eThe tiny little LiPo\/LiIon power supply shim for all versions of the Raspberry Pi!\u003c\/p\u003e\n\u003cp\u003eWe love mobile projects but having a discrete, slick, and tidy power supply solution is always tricky. LiPo SHIM (formerly known as Zero LiPo) aims to give you the most compact Raspberry Pi power supply possible.\u003c\/p\u003e\n\u003cp\u003eYou can either solder the 0.8mm thick PCB directly onto the GPIO pins on your Pi for a permanent solution, or solder on the provided 2x6 0.1\" female header which will allow you to remove your Zero LiPo at any time (but will block the GPIO pins).\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eWe use the TPS61232 step-up boost converter from Texas Instruments that offers up to 96% efficiency. The board includes power on and battery low indicator LEDs. During shutdown (due to under-voltage or external selection) the quiescent current is just 15uA sip.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.raspberrypi.org\/magpi-issues\/MagPi51.pdf\"\u003eThe MagPi\u003c\/a\u003e described LiPo SHIM as \u003cem\u003e\"a slick bit of kit\"\u003c\/em\u003e and \u003cem\u003e\"a great option for providing safe power for a portable project\"\u003c\/em\u003e in their four star review.\u003c\/p\u003e\n\u003cp\u003eNeed a battery? Check out our range of \u003ca href=\"\/en-eu\/products\/lipo-battery-pack\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eLiPo\u003c\/a\u003e and \u003ca href=\"\/en-eu\/products\/lithium-ion-battery-pack\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eLiIon\u003c\/a\u003e batteries!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e0.8mm thick PCB\u003c\/li\u003e\n\u003cli\u003eShaped to sit as low as possible on the Raspberry Pi\u003c\/li\u003e\n\u003cli\u003e2-pole JST connector ideal for most LiPo\/LiIon batteries\u003c\/li\u003e\n\u003cli\u003ePower and low battery LED indicators\u003c\/li\u003e\n\u003cli\u003eSupplies up to 1.5A continuous current (15uA quiescent current)\u003c\/li\u003e\n\u003cli\u003eLow battery warning at 3.4V (asserts GPIO #4 low)\u003c\/li\u003e\n\u003cli\u003eAutomatic shutdown at 3.0V to protect your battery\u003c\/li\u003e\n\u003cli\u003eVBAT+, GND, and EN pins available to break out\u003c\/li\u003e\n\u003cli\u003e2x6 0.1\" female header (optional, for non permanent installation)\u003c\/li\u003e\n\u003cli\u003eIncludes rubber foot to space LiPo SHIM away from your Raspberry Pi\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/pinout.xyz\/pinout\/zero_lipo\"\u003eLiPo SHIM pinout\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with all 40-pin header Raspberry Pi models\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRequires soldering\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBattery not included\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eWe've put together a one-line installer that will initiate a clean shutdown when the low battery warning is triggered and GPIO #4 is pulled low. More details are available \u003ca href=\"https:\/\/github.com\/pimoroni\/clean-shutdown\"\u003ehere\u003c\/a\u003e in the GitHub repository.\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cp\u003eThis is not a charger. You will need a separate charger to keep your LiPo\/LiIon batteries topped up! We recommend the \u003ca href=\"\/en-eu\/products\/adafruit-micro-lipo-w-microusb-jack-usb-liion-lipoly-charger\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAdafruit Micro Lipo\u003c\/a\u003e or \u003ca href=\"\/en-eu\/products\/powerboost-1000-charger-rechargeable-5v-lipo-usb-boost-1a-1000c\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePowerBoost 1000 Charger\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe VBAT+ and GND pins that are broken out can be used as alternative way to inject power, for instance if you wanted to solder on your own JST connector with wires to make it stretch a bit further.\u003c\/p\u003e\n\u003cp\u003eThe EN pin can be pulled to ground to cut the power output from LiPo SHIM.\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":21303261060,"sku":"PIM185","price":10.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/lipo-shim-1.jpg?v=1576145042"},{"product_id":"microdot-phat","title":"Micro Dot pHAT","description":"\u003cp\u003eAn unashamedly old school LED matrix display board, made up of six LED matrices each 5x7 pixels (for an effective display area of 30x7) plus a decimal point, using the beautiful little Lite-On LTP-305 matrices.\u003c\/p\u003e\n\u003cp\u003eUse between 1 and 6 matrices in your choice of green and\/or red. Perfect for building a retro scrolling message display, a tiny 30-band spectrum analyser, or a retro clock.\u003c\/p\u003e\n\u003cp\u003eMicro Dot pHAT also works well with our other pHATs and HATs. You could use it in combination with \u003ca href=\"https:\/\/shop.pimoroni.com\/products\/phat-dac\"\u003epHAT DAC\u003c\/a\u003e to display the audio spectrum, or with \u003ca href=\"https:\/\/shop.pimoroni.com\/products\/enviro-phat\"\u003eEnviro pHAT\u003c\/a\u003e to display its temperature, pressure and light readings.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.raspberrypi.org\/magpi-issues\/MagPi50.pdf\"\u003eThe MagPi\u003c\/a\u003e said that Micro Dot pHAT was \u003cem\u003e\"certainly a cut above the standard seven-segment alternative\"\u003c\/em\u003e in their four star review.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAvailable either as a bare pHAT or as a kit with 6 red or green LED modules (you'll need to solder them yourself)\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e3x IS31FL3730 LED matrix driver chips\u003c\/li\u003e\n\u003cli\u003eDrives up to 6x LTP-305 green and\/or red LED matrices\u003c\/li\u003e\n\u003cli\u003eUp to 30x7 pixels (5x7 per matrix plus a decimal point)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/pinout.xyz\/pinout\/micro_dot_phat\"\u003eMicro Dot pHAT pinout\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with all 40-pin header Raspberry Pi models\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/microdot-phat\"\u003ePython library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFemale header and display require soldering\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eWe've put together a comprehensive \u003ca href=\"https:\/\/github.com\/pimoroni\/microdot-phat\"\u003ePython library\u003c\/a\u003e to make using Micro Dot pHAT really simple, as well as a \u003ca href=\"http:\/\/learn.pimoroni.com\/tutorial\/sandyj\/assembling-micro-dot-phat\" target=\"_blank\"\u003eguide to assembling it\u003c\/a\u003e, and a \u003ca href=\"http:\/\/learn.pimoroni.com\/tutorial\/sandyj\/getting-started-with-micro-dot-phat\" target=\"_blank\"\u003egetting started guide\u003c\/a\u003e to show you how to install and use the Python library.\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Full kit - Green","offer_id":21660876292,"sku":"PIM187","price":21.5,"currency_code":"GBP","in_stock":false},{"title":"Full kit - Red","offer_id":21660876356,"sku":"PIM186","price":21.5,"currency_code":"GBP","in_stock":false},{"title":"pHAT only","offer_id":21660876420,"sku":"PIM182","price":7.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Microdot_pHAT_1_of_7.jpg?v=1571270071"},{"product_id":"pibow-extender-bolt-pack","title":"Pibow extender bolt pack","description":"\u003cp\u003eNeed a little more space in your Pibow for your latest project? This bolt pack will sort you out!\u003c\/p\u003e\n\u003cp\u003eContaining 4 bolts with 5 nuts this set gives you the option to add an extra 3 layers or 7mm of extra space to your Pibow.\u003c\/p\u003e\n\u003cp\u003eDon't need that much extra space? No problem, the bolts are nylon so you can cut them down to the size you need.\u003c\/p\u003e\n\u003cp\u003eIf you need to you can also buy \u003ca href=\"\/en-eu\/products\/pibow-modification-layers\" title=\"Pibow Modification Layers\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eextra Pibow layers \u003c\/a\u003e and these \u003ca href=\"\/en-eu\/products\/precision-micro-nippers\" title=\"Precision cutters\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehandy nippers\u003c\/a\u003e for cutting down any excess.\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":25960565768,"sku":"PIM019","price":2.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Screw_set_-_long_1_of_2.jpg?v=1571270088"},{"product_id":"automation-hat","title":"Automation HAT","description":"\u003cp\u003eTake control of and monitor your world with our ultimate jack-of-all-trades Raspberry Pi HAT!\u003c\/p\u003e\n\u003cp\u003eWe've pulled together a great set of features into this home monitoring and automation controller. With \u003cstrong\u003erelays, analog channels, powered outputs, and buffered inputs\u003c\/strong\u003e (all 24V tolerant) you can now hook up a plethora of goodies to your Raspberry Pi all at once.\u003c\/p\u003e\n\u003cp\u003eBetter still each channel has an indicator LEDs which means at a glance you can see what's happening with your setup. Even the analog channels have dimming LEDs that allow you to see the value they are currently sensing - swish!\u003c\/p\u003e\n\u003cp\u003eIdeal for smart home and automation projects, giving your greenhouse intelligent sprinklers, or scheduling your fish feeding!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e3 x 24V @ 2A relays (NC and NO terminals)\u003c\/li\u003e\n\u003cli\u003e3 x 12-bit ADC @ 0-24V (±2% accuracy)\u003c\/li\u003e\n\u003cli\u003e3 x 24V tolerant buffered inputs\u003c\/li\u003e\n\u003cli\u003e3 x 24V tolerant sinking outputs\u003c\/li\u003e\n\u003cli\u003e15 x channel indicator LEDs\u003c\/li\u003e\n\u003cli\u003e1 x 12-bit ADC @ 0-3.3V\u003c\/li\u003e\n\u003cli\u003e3.5mm screw terminals\u003c\/li\u003e\n\u003cli\u003ePower, Comms, and Warn! LED indicators\u003c\/li\u003e\n\u003cli\u003eSPI, TX (#14), RX (#15), #25 pins broken out\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/pinout.xyz\/pinout\/automation_hat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAutomation HAT pinout\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with all 40-pin header Raspberry Pi models\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/automation-hat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePython library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/automation_hat_schematic.pdf?199375959460709850\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eComes fully assembled (broken out pins require soldering)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eAs ever, we've made a super-simple to use \u003ca href=\"https:\/\/github.com\/pimoroni\/automation-hat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePython library\u003c\/a\u003e to take advantage of Automation HAT's multitudinous functions, with examples to get you started.\u003c\/p\u003e\n\u003cp\u003eOur input, output and relay examples show you how to read the analog and digital inputs, switch the outputs on and off, and control the relays - check out our \u003ca href=\"https:\/\/learn.pimoroni.com\/tutorial\/sandyj\/getting-started-with-automation-hat-and-phat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGetting Started tutorial\u003c\/a\u003e for more details!\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWe recommend you use a set of \u003ca href=\"\/en-eu\/products\/brass-m2-5-standoffs-for-pi-hats-black-plated-pack-of-2\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ebrass M2.5 standoffs\u003c\/a\u003e with Automation HAT to avoid pins contacting the HDMI port if the HAT is pushed down\u003c\/li\u003e\n\u003cli\u003eLoads for the buffered outputs should be switched on the ground side, i.e. 12\/24V (from supply) -\u0026gt; load -\u0026gt; output terminal -\u0026gt; ground (from supply)\u003c\/li\u003e\n\u003cli\u003eThe relays can tolerate up to 2A each and should be switched on the high side\u003c\/li\u003e\n\u003cli\u003eThe sinking outputs can sink a maximum 500mA total across the 3 outputs, so if you use a single channel you can sink the whole 500mA across it.\u003c\/li\u003e\n\u003cli\u003eThe accuracy of the ADC is ±2%.\u003c\/li\u003e\n\u003cli\u003eDue to exciting global electronic parts shortages, some Automation HATs manufactured in 2021 have an \u003ca href=\"https:\/\/www.ti.com\/lit\/ds\/symlink\/ads1115.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eADS1115\u003c\/a\u003e ADC instead of the usual \u003ca href=\"https:\/\/www.ti.com\/lit\/ds\/symlink\/ads1015.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eADS1015\u003c\/a\u003e. Our Python libraries have been updated to automatically detect and adjust for this chip change.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDo not use to switch mains voltages!\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":26084662728,"sku":"PIM213","price":25.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Automation_HAT_3_of_3.jpg?v=1571270088"},{"product_id":"mote-phat","title":"Mote pHAT","description":"\u003cp\u003eMote pHAT lets you run our beautiful \u003ca href=\"https:\/\/shop.pimoroni.com\/collections\/mote\"\u003eMote lights\u003c\/a\u003e straight from your Pi or Pi Zero, for a super-compact setup. Connect up to 4 \u003ca href=\"https:\/\/shop.pimoroni.com\/collections\/mote\"\u003eMote light strips\u003c\/a\u003e, with our \u003ca href=\"https:\/\/shop.pimoroni.com\/collections\/mote\"\u003eMote cables\u003c\/a\u003e, to the 4 channels provided and away you go! That's up to 64 pixels.\u003c\/p\u003e\n\u003cp\u003eThe female header comes un-soldered, so you can combine Mote pHAT with our other pHATs to display sensor readings or control Mote with buttons or switches.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.raspberrypi.org\/magpi-issues\/MagPi53.pdf\"\u003eThe MagPi\u003c\/a\u003e said that \u003cem\u003e\"Mote pHAT offers a compact, discreet way of controlling them without the need to connect to the USB port of a laptop or Pi\"\u003c\/em\u003e and that it was \u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003cem\u003e\"great value\"\u003c\/em\u003e in their four star review.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFour Mote channels (using microUSB connectors)\u003c\/li\u003e\n\u003cli\u003eUp to 64 RGB LEDs with 4 of our 16 pixel Mote strips\u003c\/li\u003e\n\u003cli\u003e2x LC125A quadruple bus buffer gates\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/pinout.xyz\/pinout\/mote_phat\"\u003eMote pHAT pinout\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with all 40-pin header Raspberry Pi models\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/mote-phat\"\u003ePython library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFemale header requires soldering\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eWe've put together a \u003ca href=\"https:\/\/github.com\/pimoroni\/mote-phat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePython library\u003c\/a\u003e to make using Mote pHAT really simple, and ported many of the examples from our standalone Mote library especially for Mote pHAT.\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":26805443976,"sku":"PIM216","price":5.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Mote_pHAT_2_of_4.jpg?v=1571270090"},{"product_id":"pan-tilt-hat","title":"Pan-Tilt HAT","description":"\u003cp\u003eIdeal for a mini CCTV system, this set of horizontal and vertical motion servos will give you Pi camera movement with a minimum of fuss.\u003c\/p\u003e\n\u003cp\u003ePan-Tilt HAT lets you mount and control one of our pan-tilt modules right on top of your Raspberry Pi. The HAT and its on-board microcontroller let you independently drive the two servos (pan and tilt), as well as driving up to 24 regular LED (with PWM control) or NeoPixel RGB (or RGBW) LEDs. There's also a handy slot through which you can route the servo, LED, and camera cables. The module pans and tilts through 180 degrees in each axis.\u003c\/p\u003e\n\u003cp\u003eUse Pan-Tilt HAT with a Pi camera for face-tracking. Or mount it on top of your roving robot as a set of eyes. Why not stick a foam sword on top and make it swashbuckle?!\u003c\/p\u003e\n\u003cp\u003eThere's absolutely no soldering required (unless you decide to use the optional NeoPixel strip or ring), as the servos on the pan-tilt module have female jumper wires attached and we've soldered a strip of right-angled header pins to the underside of the HAT to connect them up.\u003c\/p\u003e\n\u003cp\u003eWe've also included a handy little acrylic camera mount to hold your camera snugly in the head of the pan-tilt module. The mount has a couple of mounting holes at the top to hold a NeoPixel stick and there's a neat little frosted diffuser to make the light super-dreamy. :-) We suggest one of the \u003ca href=\"\/en-eu\/products\/neopixel-stick-8-x-5050-rgbw-leds\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAdafruit RGBW NeoPixel sticks\u003c\/a\u003e, as they give a lovely pure white (or any other colour!)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote that the \u003ca href=\"\/en-eu\/products\/raspberry-pi-camera-module-v2-1-with-mount\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePi camera\u003c\/a\u003e, \u003ca href=\"\/en-eu\/products\/neopixel-stick-8-x-5050-rgbw-leds\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eNeoPixel strip\u003c\/a\u003e, \u003ca href=\"\/en-eu\/products\/break-away-0-1-36-pin-strip-male-header-10-pieces\" target=\"_blank\" rel=\"noopener noreferrer\"\u003emale header\u003c\/a\u003e, \u003ca href=\"\/en-eu\/products\/jumper-jerky\" target=\"_blank\" rel=\"noopener noreferrer\"\u003efemale to female jumper wires\u003c\/a\u003e, \u003ca href=\"\/en-eu\/products\/raspberry-pi-3-with-pibow-case\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePi 3 and Pibow\u003c\/a\u003e are not included. You'll need to pick them up separately!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.raspberrypi.org\/magpi-issues\/MagPi54.pdf\"\u003eThe MagPi\u003c\/a\u003e said, in their four star review, that Pan-Tilt HAT was a \u003cem\u003e\"highly enjoyable and extremely cute accessory\"\u003c\/em\u003e.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePan-tilt module (180 degrees motion through each axis) with two servos\u003c\/li\u003e\n\u003cli\u003eHAT with two servo channels, one PWM or NeoPixel RGB (or RGBW) LED channel\u003c\/li\u003e\n\u003cli\u003eRight-angled header pre-soldered to underside of HAT for servo and LED channels\u003c\/li\u003e\n\u003cli\u003eSlot to route servo, LED, and camera cables through\u003c\/li\u003e\n\u003cli\u003eAcrylic mount to hold Pi camera and NeoPixel strip (with diffuser) in place\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/pinout.xyz\/pinout\/pan_tilt_hat\"\u003ePan-Tilt HAT pinout\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with all 40-pin header Raspberry Pi models\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/pantilt-hat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePython library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eComes fully assembled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eWe've put together a super-simple \u003ca href=\"https:\/\/github.com\/pimoroni\/pantilt-hat\"\u003ePython library\u003c\/a\u003e to make it super-easy to control Pan-Tilt HAT. Just tell Pan-Tilt HAT to which angle you'd like it to pan or tilt (from -90 to +90 degrees) and away it goes! There's even a couple of examples showing you how to pan and tilt, and control connected NeoPixels.\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe servos draw a lot of current, thus we recommend a good quality 2.5A power supply like the \u003ca href=\"\/en-eu\/products\/raspberry-pi-universal-power-supply\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eofficial Raspberry Pi power supply\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-eu\/products\/raspberry-pi-camera-module-v2-1-with-mount\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePi camera\u003c\/a\u003e, \u003ca href=\"\/en-eu\/products\/neopixel-stick-8-x-5050-rgbw-leds\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eNeoPixel strip\u003c\/a\u003e, \u003ca href=\"\/en-eu\/products\/break-away-0-1-36-pin-strip-male-header-10-pieces\" target=\"_blank\" rel=\"noopener noreferrer\"\u003emale header\u003c\/a\u003e, \u003ca href=\"\/en-eu\/products\/jumper-jerky\" target=\"_blank\" rel=\"noopener noreferrer\"\u003efemale to female jumper wires\u003c\/a\u003e, \u003ca href=\"\/en-eu\/products\/raspberry-pi-3-with-pibow-case\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePi 3 and Pibow\u003c\/a\u003e are not included.\u003c\/li\u003e\n\u003cli\u003eConnect the brown wires of the servo cables to the GND pins on the servo channels.\u003c\/li\u003e\n\u003cli\u003eServo channel 1 controls pan and servo channel 2 controls tilt, although you can easily swap these in software.\u003c\/li\u003e\n\u003cli\u003eYou may require a set of \u003ca href=\"\/en-eu\/products\/brass-m2-5-standoffs-for-pi-hats-black-plated-pack-of-2\"\u003estandoffs\u003c\/a\u003e to use Pan-Tilt HAT with the Raspberry Pi 3B+.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Full kit","offer_id":27671331272,"sku":"PIM183","price":30.75,"currency_code":"GBP","in_stock":false},{"title":"without Pan-Tilt module","offer_id":27979046088,"sku":"PIM250","price":13.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Pan-Tilt_HAT_5_of_5.jpg?v=1571270090"},{"product_id":"pimoroni-super-sticker-selection","title":"Pimoroni Super Sticker Selection","description":"\u003cp\u003eStickers! Use them on your Pibow, your laptop, your notebook or your bedroom door!\u003c\/p\u003e\n\u003cp\u003eThis lovely little pack contains all of the sticker sets from our various kits, along with a Raspberry Pi logo sticker, and the unmistakable Pimoroni Pirate for added awesome-ness\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":30574320136,"sku":"PIM282","price":4.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Selection.jpg?v=1571270133"},{"product_id":"pibow-zero-w","title":"Pibow Zero W","description":"\u003cp\u003eProtect your \u003ca href=\"\/en-eu\/products\/raspberry-pi-zero-w\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePi Zero W\u003c\/a\u003e in style with the Pibow Zero W case, in beautiful berry colours - red, purple, and blue!\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003ethis is the case for the \u003ca href=\"\/en-eu\/products\/raspberry-pi-zero-w\"\u003eRaspberry Pi Zero W\u003c\/a\u003e only. This case is not compatible with the Pi Zero v1.2\/1.3. Does not include a Raspberry Pi Zero W!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.pimoroni.com\/tutorial\/sandyj\/pibow-zero-assembly\"\u003eWe've got a tutorial showing you how to build your Pibow here.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with \u003ca href=\"\/en-eu\/products\/raspberry-pi-zero-w\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaspberry Pi Zero W\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuper-slimline profile\u003c\/li\u003e\n\u003cli\u003eFully HAT\/pHAT compatible\u003c\/li\u003e\n\u003cli\u003eProtects your beloved Pi Zero W!\u003c\/li\u003e\n\u003cli\u003eClear top leaves Raspberry Pi Zero W visible\u003c\/li\u003e\n\u003cli\u003eGPIO cut-out\u003c\/li\u003e\n\u003cli\u003eLeaves ports and GPIO accessible (encloses micro SD and blocks RUN\/TV header)\u003c\/li\u003e\n\u003cli\u003eMade from lightweight high-quality cast acrylic\u003c\/li\u003e\n\u003cli\u003eGreat for hacking and tinkering!\u003c\/li\u003e\n\u003cli\u003eMade in Sheffield, UK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCrafted out of four unique layers including a transparent top and base that leave your beautiful Pi visible inside. Each layer is laser-cut from colourful high-quality cast acrylic and once stacked they securely contain a Raspberry Pi Zero W while leaving the primary ports and GPIO accessible.\u003c\/p\u003e\n\u003cp\u003eThis case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly (check out the exploded diagram on this page for tips on assembly, or our \u003ca href=\"https:\/\/learn.pimoroni.com\/tutorial\/sandyj\/pibow-zero-assembly\" target=\"_blank\" rel=\"noopener noreferrer\"\u003etutorial\u003c\/a\u003e).\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":31351005128,"sku":"PIM258","price":5.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Pibow_Zero_W_1_of_4.jpg?v=1571270133"},{"product_id":"scroll-phat-hd","title":"Scroll pHAT HD","description":"\u003cp\u003eA whole heap of LED pixels with individual brightness control, for scrolling messages, animations, and more - Scroll pHAT HD!\u003c\/p\u003e\n\u003cp\u003eScroll pHAT HD packs 17x7 pixels (119 total) onto a single pHAT, and gives you full PWM brightness control over each pixel. Create beautiful animations and even anti-aliased text by taking advantage of the per-pixel brightness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNow also available in beautiful coloured versions: red, orange, yellow, green, blue, and pink!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse Scroll pHAT HD as a scrolling message display for your tweets, the weather or the news, or use it as a 17-band spectrum analyser for your audio. There's even enough pixels for simple games like Tetris, Pong, or snake.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e17x7 matrix of bright white, or coloured, pixels (119 total)\u003c\/li\u003e\n\u003cli\u003eIndividual PWM brightness control of each pixel\u003c\/li\u003e\n\u003cli\u003eUses the IS31FL3731 LED matrix driver chip\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/pinout.xyz\/pinout\/scroll_phat_hd\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eScroll pHAT HD pinout\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with all 40-pin header Raspberry Pi models\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/scroll-phat-hd\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePython library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eFemale header requires soldering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eOur handy one-line installer will install the \u003ca href=\"https:\/\/github.com\/pimoroni\/scroll-phat-hd\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eScroll pHAT HD Python library\u003c\/a\u003e for you. We've included a bunch of \u003ca href=\"https:\/\/github.com\/pimoroni\/scroll-phat-hd\/tree\/master\/examples\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eexamples\u003c\/a\u003e too, to show off what you can do with Scroll pHAT HD.\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"White","offer_id":31351050888,"sku":"PIM268","price":11.5,"currency_code":"GBP","in_stock":false},{"title":"Red","offer_id":1561874595848,"sku":"PIM331","price":11.5,"currency_code":"GBP","in_stock":false},{"title":"Orange","offer_id":1561874825224,"sku":"PIM332","price":11.5,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":1561875742728,"sku":"PIM333","price":11.5,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":1561875775496,"sku":"PIM334","price":11.5,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":1561875808264,"sku":"PIM335","price":11.5,"currency_code":"GBP","in_stock":false},{"title":"Pink","offer_id":1561876004872,"sku":"PIM336","price":11.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Scroll_pHAT_HD_3_of_4_a26b66c6-1de9-49b7-a254-2ff58981fdd9.jpg?v=1571270133"},{"product_id":"pi-zero-w-starter-kit","title":"Pi Zero W Starter Kit","description":"\u003cp\u003eA great bundle of things you need to get up and running with the new Pi Zero W!\u003c\/p\u003e\n\u003cp\u003eIncluding an SD card with operating system pre-loaded, a smart and colourful \u003ca href=\"\/en-eu\/products\/pibow-zero-w\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePibow Zero W\u003c\/a\u003e case, and even one of our lovely \u003ca href=\"\/en-eu\/products\/blinkt\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBlinkt!\u003c\/a\u003e multicolour LED strips to take your first steps with coding in Python!\u003c\/p\u003e\n\u003ch2\u003eKit includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePi Zero W (\u003cstrong\u003eheader requires soldering, or try a no-solder \u003ca href=\"\/en-eu\/products\/gpio-hammer-header\"\u003ehammer header\u003c\/a\u003e\u003c\/strong\u003e)\u003c\/li\u003e\n\u003cli\u003ePibow case\u003c\/li\u003e\n\u003cli\u003e16GB micro-SD card with operating system pre-loaded\u003c\/li\u003e\n\u003cli\u003eBlinkt! multicolour LED strip\u003c\/li\u003e\n\u003cli\u003eMale 2x20 pin header\u003c\/li\u003e\n\u003cli\u003e50cm USB A to micro-B cable\u003c\/li\u003e\n\u003cli\u003eUSB A (female) to micro B (male) adaptor\u003c\/li\u003e\n\u003cli\u003emini to full-size HDMI adaptor\u003c\/li\u003e\n\u003cli\u003eSticker sheet (personalise your Pibow!)\u003c\/li\u003e\n\u003cli\u003eComes in a reusable kit box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe built-in wireless LAN and Bluetooth on the Pi Zero W frees up the micro-USB port, and makes for a really tiny package when using the Zero W in embedded, headless Internet of Things projects. Or why not use a Bluetooth mouse and keyboard, and hide your Pi behind your monitor or TV?\u003c\/p\u003e\n\u003cp\u003eOur beautiful Pibow case will keep your Pi Zero W protected from bumps and bruises. It has a clear top layer, and frosted red, purple, and blue layers. The clever design leaves the GPIO pins free, letting you attach our add-on boards like the Blinkt! while your Pi is still safely ensconced in its case. You can use the included sticker sheet to personalise your Pibow!\u003c\/p\u003e\n\u003cp\u003eThe included 16GB micro-SD card comes pre-loaded with the Raspbian operating system. Just remove it from the larger SD card adaptor, pop it into the slot on your Pi Zero W before putting it into the Pibow case, and you'll be up-and-running in next to no time\u003c\/p\u003e\n\u003cp\u003eOur Blinkt! multicolour LED strip is the perfect way to take your first steps with coding in Python. Our \u003ca href=\"https:\/\/learn.pimoroni.com\/tutorial\/sandyj\/getting-started-with-blinkt\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGetting Started with Blinkt!\u003c\/a\u003e guide will teach you the basics, and there's a bunch of \u003ca href=\"https:\/\/github.com\/pimoroni\/blinkt\/tree\/master\/examples\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ecode examples\u003c\/a\u003e in the \u003ca href=\"https:\/\/github.com\/pimoroni\/blinkt\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBlinkt! GitHub code repository\u003c\/a\u003e to give you an idea of what's possible.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBlinkt! with eight APA102 RGB LEDs\u003c\/li\u003e\n\u003cli\u003ePi Zero W with single core CPU and built-in wireless LAN and Bluetooth\u003c\/li\u003e\n\u003cli\u003ePibow Zero W acrylic case\u003c\/li\u003e\n\u003cli\u003e16GB micro-SD card with NOOBS 2.2 pre-loaded\u003c\/li\u003e\n\u003cli\u003eAdaptor kit\u003c\/li\u003e\n\u003cli\u003e50cm USB A to micro-B cable (power your Pi from an existing charger or computer)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/blinkt\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePython library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eFemale and male headers require soldering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eOur \u003ca href=\"https:\/\/github.com\/pimoroni\/blinkt\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePython library\u003c\/a\u003e will give you full control over your Blinkt! There's even a nifty one-line installer to get everything set up super-quick. There's details on how to get started in our \u003ca href=\"https:\/\/learn.pimoroni.com\/tutorial\/sandyj\/getting-started-with-blinkt\" target=\"_blank\" rel=\"noopener noreferrer\"\u003etutorial\u003c\/a\u003e.\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":31587706696,"sku":"PIM262","price":34.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/zero-w-kits-square-4.jpg?v=1571270134"},{"product_id":"scroll-bot-pi-zero-w-project-kit","title":"Scroll Bot - Pi Zero WH Project Kit","description":"\u003cp\u003eA robot friend to sit on your desk and scroll the news, weather, or your Twitter feed - Scroll Bot!\u003c\/p\u003e\n\u003cp\u003eThe Scroll Bot Kit* combines the Pi Zero W with our new swish \u003ca href=\"\/en-eu\/products\/scroll-phat-hd\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eScroll pHAT HD\u003c\/a\u003e board, and masquerades as a friendly orange robot, perfect for sitting on your desk or on a shelf. It's ideal for scrolling messages or for simple animations and, of course, it takes advantage of the built-in wireless LAN on the \u003ca href=\"\/en-eu\/products\/raspberry-pi-zero-w\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePi Zero W\u003c\/a\u003e. It'll take around 30 minutes to assemble everything** (check out our \u003ca href=\"https:\/\/learn.pimoroni.com\/tutorial\/sandyj\/assembling-scroll-bot\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eassembly guide\u003c\/a\u003e for details).\u003c\/p\u003e\n\u003ch2\u003eKit contents*\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePi Zero W\u003c\/li\u003e\n\u003cli\u003eScroll pHAT HD with 17x7 individually dimmable white LEDs\u003c\/li\u003e\n\u003cli\u003eMale and female 2x20 pin headers\u003c\/li\u003e\n\u003cli\u003eOrange robot stand and diffuser\u003c\/li\u003e\n\u003cli\u003e50cm USB A to micro-B cable\u003c\/li\u003e\n\u003cli\u003eUSB A (female) to micro B (male) adaptor\u003c\/li\u003e\n\u003cli\u003eMini to full-size HDMI adaptor\u003c\/li\u003e\n\u003cli\u003eSticker sheet (personalise your Scroll Bot!)\u003c\/li\u003e\n\u003cli\u003eComes in a reusable kit box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Just add your own \u003ca href=\"\/en-eu\/products\/noobs-8gb-sd-card\" target=\"_blank\" rel=\"noopener noreferrer\"\u003emicro-SD card\u003c\/a\u003e\u003cbr\u003e**\u003cstrong\u003e\u003cstrong\u003eNote that this is a soldering project\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e, although you could use one of \u003ca href=\"https:\/\/pimoroni-2.myshopify.com\/products\/gpio-hammer-header\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eno-solder hammer headers\u003c\/a\u003e!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScroll Bot uses our new Scroll pHAT HD board, a dense matrix of 17x7 (119 total) bright white LEDs. Each pixel's brightness can be controlled individually, meaning that it's possible to create stunning animations or even anti-aliased text. The LED matrix sits behind Scroll Bot's mouth, and the frosted orange acrylic diffuses the LEDs beautifully.\u003c\/p\u003e\n\u003cp\u003eUse the built-in wireless LAN to make your Scroll Bot internet-connected and have him\/her\/it inform you of the latest news, weather, track hashtags or mentions on Twitter, or much, much more.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e17x7 matrix of bright white pixels (119 total)\u003c\/li\u003e\n\u003cli\u003eIndividual PWM brightness control of each pixel\u003c\/li\u003e\n\u003cli\u003eUses the IS31FL3731 LED matrix driver chip\u003c\/li\u003e\n\u003cli\u003e3-layer orange robot stand and diffuser\u003c\/li\u003e\n\u003cli\u003ePi Zero W with single core CPU and built-in wireless LAN and Bluetooth\u003c\/li\u003e\n\u003cli\u003eAdaptor kit\u003c\/li\u003e\n\u003cli\u003e50cm USB A to micro-B cable (power your Pi from an existing charger or computer)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/scroll-phat-hd\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePython library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFemale and male headers require soldering\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eOur handy one-line installer will install the \u003ca href=\"https:\/\/github.com\/pimoroni\/scroll-phat-hd\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eScroll pHAT HD Python library\u003c\/a\u003e for you. We've included a bunch of \u003ca href=\"https:\/\/github.com\/pimoroni\/scroll-phat-hd\/tree\/master\/examples\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eexamples\u003c\/a\u003e too, to show off what you can do with Scroll pHAT HD.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e that the default orientation for Scroll pHAT HD is upside-down if you're using it in a Scroll Bot. To flip it, simply add \u003ccode\u003escrollphathd.rotate(180)\u003c\/code\u003e towards the top of your code, just below the import lines.\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cp\u003eAssembled size of Scroll Bot is 125x85x67mm (WxHxD).\u003c\/p\u003e\n\u003cp style=\"color: white;\"\u003e\"Strange women lying in ponds distributing swords is no basis for a system of government.\"\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":31587710984,"sku":"PIM260","price":41.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/zero-w-kits-square-3.jpg?v=1571270134"},{"product_id":"mood-light-pi-zero-w-project-kit","title":"Mood Light - Pi Zero WH Project Kit","description":"\u003cp\u003eA beautifully modern Mood Light that'll look great on your bedside table, bookcase, or desk, and it's internet-connected!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUpdated version! \u003c\/strong\u003eOur Mood Light Kit now includes a \u003ca href=\"\/en-eu\/products\/raspberry-pi-zero-wh-with-pre-soldered-header\" target=\"_blank\"\u003eRaspberry Pi Zero WH\u003c\/a\u003e and a brand spanking new \u003ca rel=\"noopener noreferrer\" href=\"\/en-eu\/products\/unicorn-hat-mini\" target=\"_blank\"\u003eUnicorn HAT Mini\u003c\/a\u003e - this means you now get 119 LEDs instead of 32, four programmable buttons and there's now absolutely no soldering required. Nice!\u003c\/p\u003e\n\u003cp\u003eOur Mood Light Kit has everything* you'll need to build a sleek looking light that evokes a real pendant light, and uses our \u003ca rel=\"noopener noreferrer\" href=\"\/en-eu\/products\/unicorn-hat-mini\" target=\"_blank\"\u003eUnicorn HAT Mini\u003c\/a\u003e board packed with 119 teeny tiny RGB LEDs. Set it to a single colour, have it fade through all the colours of the rainbow, or harness the built-in wireless LAN on the \u003ca rel=\"noopener noreferrer\" href=\"\/en-eu\/products\/raspberry-pi-zero-wh-with-pre-soldered-header\" target=\"_blank\"\u003ePi Zero WH\u003c\/a\u003e. It'll take around 30 minutes to assemble everything** (check out our \u003ca href=\"https:\/\/learn.pimoroni.com\/tutorial\/sandyj\/assembling-mood-light\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eassembly guide\u003c\/a\u003e for details).\u003c\/p\u003e\n\u003ch2\u003eKit contents*\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePi Zero WH\u003c\/li\u003e\n\u003cli\u003eUnicorn HAT Mini with a 17x7 matrix of RGB LEDs\u003c\/li\u003e\n\u003cli\u003eWhite and yellow pendant light stand and diffuser\u003c\/li\u003e\n\u003cli\u003e50cm USB A to micro-B cable\u003c\/li\u003e\n\u003cli\u003eUSB A (female) to micro B (male) adaptor\u003c\/li\u003e\n\u003cli\u003eMini to full-size HDMI adaptor\u003c\/li\u003e\n\u003cli\u003eSticker sheet (personalise your Mood Light!)\u003c\/li\u003e\n\u003cli\u003eComes in a reusable kit box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Just add your own \u003ca href=\"\/en-eu\/products\/noobs-32gb-microsd-card-3-1\" target=\"_blank\" rel=\"noopener noreferrer\"\u003emicro-SD card\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eMood Light uses our popular Unicorn HAT Mini board, with 119 individually controllable RGB LEDs, giving you a veritable rainbow full of colour possibilities. The stand cleverly mounts the Pi Zero WH and Unicorn HAT Mini at just the right angle to cast the light through the pendant light cutout and diffuse it beautifully.\u003c\/p\u003e\n\u003cp\u003eThe built-in wireless LAN on the Pi Zero WH opens up a wealth of opportunities: connect it to your Twitter feed and track the mood of your recent tweets, or fade through the sunset and sunrise colours once you've pulled the daily sunset\/sunrise times from your favourite weather server.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e17x7 matrix of RGB LEDs\u003c\/li\u003e\n\u003cli\u003e4 programmable buttons\u003c\/li\u003e\n\u003cli\u003e3-layer white and yellow pendant light stand and diffuser\u003c\/li\u003e\n\u003cli\u003ePi Zero WH with single core CPU and built-in wireless LAN and Bluetooth\u003c\/li\u003e\n\u003cli\u003eAdaptor kit\u003c\/li\u003e\n\u003cli\u003e50cm USB A to micro-B cable (power your Pi from an existing charger or computer)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/unicornhatmini-python\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePython library\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eWe've put together \u003ca href=\"https:\/\/github.com\/pimoroni\/unicornhatmini-python\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePython library for Unicorn HAT Mini\u003c\/a\u003e that makes it simple to control individual LED's colour and brightness, display images or test, make games, and more. There's some really fun examples of how to use the buttons for games, with Simon Says and a fun little Columns-type game with coloured, falling blocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you have a Unicorn HAT Mini you won't be able to use the old Unicorn pHAT library - please make sure you're using the one linked above!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cp\u003eAssembled size of Mood Light is 85x125x70mm (WxHxD).\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":31587714568,"sku":"PIM259","price":41.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/zero-w-kits-square-2.jpg?v=1571270134"},{"product_id":"pirate-radio-pi-zero-w-project-kit","title":"Pirate Radio - Pi Zero WH Project Kit","description":"\u003cp\u003eBuild your very own internet-connected radio with the Pirate Radio Kit!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUpdated version! \u003c\/strong\u003eThe kit now includes a Raspberry Pi Zero WH and the audio board now includes a pre-soldered header.\u003cstrong\u003e No soldering required!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit has everything* you'll need, including a \u003ca href=\"\/en-eu\/products\/raspberry-pi-zero-wh-with-pre-soldered-header\" target=\"_blank\"\u003ePi Zero WH\u003c\/a\u003e, audio board with VU meter LEDs, I2S DAC, and stereo amp, a \u003ca href=\"\/en-eu\/products\/3-speaker-4-3w\" target=\"_blank\"\u003e5W speaker\u003c\/a\u003e, and a beautifully retro acrylic enclosure to make it look the business. It'll take you around 30 minutes to put together (check out our \u003ca href=\"https:\/\/learn.pimoroni.com\/tutorial\/sandyj\/assembling-pirate-radio\" target=\"_blank\"\u003eassembly guide\u003c\/a\u003e for details).\u003c\/p\u003e\n\u003ch2\u003eKit contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRaspberry Pi Zero WH\u003c\/li\u003e\n\u003cli\u003eAudio board with I2S DAC, stereo amp. VU meter, and six buttons\u003c\/li\u003e\n\u003cli\u003eSingle 5W 4Ω speaker\u003c\/li\u003e\n\u003cli\u003eBlue acrylic enclosure **\u003c\/li\u003e\n\u003cli\u003e50cm USB A to micro-B cable\u003c\/li\u003e\n\u003cli\u003eUSB A (female) to micro B (male) adaptor\u003c\/li\u003e\n\u003cli\u003eMini to full-size HDMI adaptor\u003c\/li\u003e\n\u003cli\u003eSticker sheet (personalise your Pirate Radio!)\u003c\/li\u003e\n\u003cli\u003eComes in a reusable kit box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e* Just add your own \u003ca href=\"\/en-eu\/products\/noobs-32gb-microsd-card-3-1\" target=\"_blank\"\u003emicro-SD card\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e** We've tweaked the design of the back layer and legs recently, and have updated the \u003ca href=\"https:\/\/learn.pimoroni.com\/tutorial\/sandyj\/assembling-pirate-radio\" target=\"_blank\"\u003ebuild guide\u003c\/a\u003e with extra instructions for these new pieces.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit takes advantage of the built-in wireless LAN and Bluetooth on the Pi Zero WH, meaning that there's no longer any need for a USB Wi-Fi dongle.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWe've put together three different software projects for your Pirate Radio: an \u003ca href=\"https:\/\/github.com\/pimoroni\/phat-beat\/tree\/master\/projects\/vlc-radio\" target=\"_blank\"\u003einternet radio\u003c\/a\u003e, a \u003ca href=\"https:\/\/learn.pimoroni.com\/tutorial\/sandyj\/streaming-spotify-to-your-pi\" target=\"_blank\"\u003eSpotify streaming box\u003c\/a\u003e, or an \u003ca href=\"https:\/\/learn.pimoroni.com\/tutorial\/sandyj\/streaming-airplay-to-your-pi\" target=\"_blank\"\u003eAirPlay speaker\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDual I2S DAC\/amplifiers (MAX98357A)\u003c\/li\u003e\n\u003cli\u003e3W per channel\u003c\/li\u003e\n\u003cli\u003e2x push fit speaker terminals\u003c\/li\u003e\n\u003cli\u003eDIP switch to select blended mono or stereo modes\u003c\/li\u003e\n\u003cli\u003e16 RGB LED pixels (APA102) in 2 rows of 8\u003c\/li\u003e\n\u003cli\u003e6 edge-mounted push buttons\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/pimoroni\/phat-beat#full-install-recommended\" target=\"_blank\"\u003eSoftware installer\u003c\/a\u003e and ALSA VU meter plugin\u003c\/li\u003e\n\u003cli\u003e5W 4Ω speaker with pre-soldered wires\u003c\/li\u003e\n\u003cli\u003e3-layer blue acrylic enclosure\u003c\/li\u003e\n\u003cli\u003ePi Zero W with single core CPU and built-in wireless LAN and Bluetooth\u003c\/li\u003e\n\u003cli\u003eAdaptor kit\u003c\/li\u003e\n\u003cli\u003e50cm USB A to micro-B cable (power your Pi from an existing charger or computer)\u003c\/li\u003e\n\u003cli\u003ePre-soldered header\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/phat-beat\" target=\"_blank\"\u003ePython library\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eOur nifty \u003ca href=\"https:\/\/github.com\/pimoroni\/phat-beat#full-install-recommended\" target=\"_blank\"\u003eone-line installer\u003c\/a\u003e will get your pHAT BEAT configured and install our VU meter plugin for ALSA that uses the RGB LEDs on pHAT BEAT to display sound levels.\u003c\/p\u003e\n\u003cp\u003eWe've also put together a \u003ca href=\"https:\/\/github.com\/pimoroni\/phat-beat\" target=\"_blank\"\u003ePython library\u003c\/a\u003e to allow you to control the LEDs independently, if you wish, and to program the buttons to do whatever you wish.\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cp\u003eAssembled size of Pirate Radio is 135x85x70mm (WxHxD).\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":31588074248,"sku":"PIM261","price":40.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/zero-w-kits-square-1.jpg?v=1608022971"},{"product_id":"four-letter-phat","title":"Four Letter pHAT","description":"\u003cp\u003eUse Four Letter pHAT to display... four letter words. Not that sort!\u003c\/p\u003e\n\u003cp\u003eFour Letter pHAT has four 14-segment displays that you can use to display text, numbers, and a host of other characters. Its LEDs are a beautiful retro green, just like you old digital alarm clock. They're driven by the HT16K33 chip over I2C.\u003c\/p\u003e\n\u003cp\u003eIt's perfect as a readout for your projects, displaying temperatures, times, etc. and becomes really useful when combined with some of our other boards like \u003ca href=\"\/en-eu\/products\/enviro-phat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEnviro pHAT\u003c\/a\u003e or \u003ca href=\"\/en-eu\/products\/explorer-phat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eExplorer pHAT\u003c\/a\u003e to display their sensor values.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFour 14-segment displays with green LEDs\u003c\/li\u003e\n\u003cli\u003eHT16K33 driver chip\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/pinout.xyz\/pinout\/four_letter_phat\"\u003eFour Letter pHAT pinout\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with all 40-pin header Raspberry Pi models\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/fourletter-phat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePython library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFemale header and display pins require soldering\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eOur handy one-line installer will install the \u003ca href=\"https:\/\/github.com\/pimoroni\/fourletter-phat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFour Letter pHAT Python library\u003c\/a\u003e for you. We've included a bunch of \u003ca href=\"https:\/\/github.com\/pimoroni\/fourletter-phat\/tree\/master\/examples\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eexamples\u003c\/a\u003e too, to show off what you can do with Four Letter pHAT; things like a clock, a countdown timer, or CPU activity monitor.\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":31977146312,"sku":"PIM266","price":9.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Four_letter_pHAT_5_of_5_1a005b45-151c-4938-8610-8ec758b4182d.jpg?v=1571270135"},{"product_id":"pimoroni-tote","title":"Pimoroni Tote","description":"\u003cp\u003eStyle and sophistication can be yours with this eye-catching and spacious tote bag.\u003c\/p\u003e\n\u003cp\u003eRigorously tested by our Pimoroni staff, we can now confirm that this bag is ideal for shopping trips, Maker Faires, picnics, days at the beach, and school sports' days.\u003c\/p\u003e\n\u003cp\u003eThe spacious interior could hold anything from a Raspberry Pi Zero kit to a baby velociraptor*, while the bold colouring will ensure that you always stand out from the crowd no matter where you find yourself.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003csub\u003e*do not attempt to put a baby velociraptor, or indeed any creature of any size, into the Pimoroni Tote. It won't end well for anyone...\u003c\/sub\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Blue","offer_id":35516011208,"sku":"PIM287","price":5.0,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":35516011336,"sku":"PIM288","price":5.0,"currency_code":"GBP","in_stock":false},{"title":"Grey","offer_id":35516011464,"sku":"PIM289","price":5.0,"currency_code":"GBP","in_stock":false},{"title":"Purple","offer_id":35516011592,"sku":"PIM290","price":5.0,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":35516011784,"sku":"PIM291","price":5.0,"currency_code":"GBP","in_stock":false},{"title":"Pink","offer_id":35516011848,"sku":"PIM292","price":5.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Tote_bags_variant_2_of_6.jpg?v=1571270136"},{"product_id":"onoff-shim","title":"OnOff SHIM","description":"\u003cp\u003eAdd a tiny yet convenient power switch to your Pi with OnOff SHIM!\u003c\/p\u003e\n\u003cp\u003eOur SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be small, affordable, and handy. They're just 0.8mm thick (the bare board, not including mounted components) and designed to be soldered straight onto the GPIO pins of your Pi, if you wish, so that you can use them with HATs and pHATs on top.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eJust plug your micro-USB power supply into the micro-B connector on OnOff SHIM, and then press the button once to switch on power and boot up your Pi. After installing our software (details below), you can press and hold the button for one second to initiate a clean shutdown and completely cut the power to your Pi.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSuper-small SHIM-format board\u003c\/li\u003e\n\u003cli\u003e0.8mm thick PCB\u003c\/li\u003e\n\u003cli\u003eCan be used with HATs and pHATs\u003c\/li\u003e\n\u003cli\u003eCorner-mounted push button for on\/off\u003c\/li\u003e\n\u003cli\u003eMicro-B connector for power supply\u003c\/li\u003e\n\u003cli\u003eRed status LED\u003c\/li\u003e\n\u003cli\u003eOptional breakout pins to connect an external momentary button\u003c\/li\u003e\n\u003cli\u003e2x6 female header included\u003c\/li\u003e\n\u003cli\u003eSupports up to 2.5A power supply\u003c\/li\u003e\n\u003cli\u003eSoftware daemon to shutdown cleanly\u003c\/li\u003e\n\u003cli\u003eCompatible with all 40-pin header Raspberry Pi models\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRequires soldering\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eWe've put together a one-line-installer to install the clean shutdown daemon. It watches the state of BCM pin 17 and, when pulled low (pressed), it initiates a clean shutdown. Last thing, just before your Pi shuts down, BCM pin 4 is pulled low to completely cut power to your Pi.\u003c\/p\u003e\n\u003cp\u003eTo install the software, open a terminal and type \u003ccode\u003ecurl https:\/\/get.pimoroni.com\/onoffshim | bash\u003c\/code\u003e to run the one-line-installer.\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":35517234504,"sku":"PIM269","price":6.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/OnOff_Shim_3_of_3.jpg?v=1571270137"},{"product_id":"octocam-pi-zero-w-project-kit","title":"OctoCam - Pi Zero W Project Kit","description":"\u003cp\u003eA cute, connected, cephalopod camera to stick on your window or sit on your shelf!\u003c\/p\u003e\n\u003cp\u003eThe OctoCam kit has everything* you'll need, including a \u003ca href=\"\/en-eu\/products\/raspberry-pi-zero-w\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePi Zero W\u003c\/a\u003e, a super-small 5MP camera, a fun octopus acrylic mount with four suction cups, and a desk stand. It'll take you around 30 minutes to put it all together (check out our \u003ca href=\"https:\/\/learn.pimoroni.com\/tutorial\/sandyj\/assembling-octocam\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eassembly guide\u003c\/a\u003e for details).\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.raspberrypi.org\/magpi-issues\/MagPi59.pdf\"\u003eThe MagPi\u003c\/a\u003e said \u003cem\u003e\"with its compact dimensions and fun design, the OctoCam is very appealing\"\u003c\/em\u003e, in their four star review.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e that connecting your OctoCam running motionEyeOS to Wi-Fi requires a bit of extra configuration, but we have full details in our \u003ca href=\"http:\/\/learn.pimoroni.com\/tutorial\/sandyj\/motioneye-os-on-your-octocam\"\u003etutorial on setting up motionEyeOS\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKit contents*\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePi Zero W\u003c\/li\u003e\n\u003cli\u003e5MP camera with built-in cable and circuitry\u003c\/li\u003e\n\u003cli\u003eOctoCam acrylic mount, suction cups, desk stand\u003c\/li\u003e\n\u003cli\u003e50cm USB A to micro-B cable\u003c\/li\u003e\n\u003cli\u003eUSB A (female) to micro B (male) adaptor\u003c\/li\u003e\n\u003cli\u003eMini to full-size HDMI adaptor\u003c\/li\u003e\n\u003cli\u003eMale 2x20 pin header\u003c\/li\u003e\n\u003cli\u003eSticker sheet\u003c\/li\u003e\n\u003cli\u003eComes in a reusable kit box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e*Just add your own \u003ca href=\"\/en-eu\/products\/noobs-8gb-sd-card\" target=\"_blank\" rel=\"noopener noreferrer\"\u003emicro-SD card\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eOctoCam uses our neat little Pi Zero camera; the most compact way to add a camera to your Pi. It uses the same 5MP sensor as the original Pi camera, so it works out of the box with your Pi, in the same way as the official Pi cameras. The cable and circuitry is all built-in, meaning that connecting it is as simple as plugging in the ribbon cable to the connector on your Pi Zero W.\u003c\/p\u003e\n\u003cp\u003eThis kit takes advantage of the built-in wireless LAN and Bluetooth on the Pi Zero W, meaning that there's no longer any need for a USB Wi-Fi dongle.\u003c\/p\u003e\n\u003cp\u003eOctoCam is perfect for setting up a compact CCTV camera in your house, or for recording time lapses. Stick it to your kitchen window and keep an eye on your bird feeder or nesting box. Keep tabs on your cat or dog while you're out of the house, or use it to track the growth of your houseplants!\u003c\/p\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eWe love the \u003ca href=\"https:\/\/github.com\/ccrisan\/motioneyeos\/wiki\/Installation\" target=\"_blank\" rel=\"noopener noreferrer\"\u003emotionEyeOS software\u003c\/a\u003e, which makes it simple to set up your OctoCam as a remote camera that you can monitor through any connected web browser. It has all sorts of bells and whistles to trigger photos and videos to be captured when motion is detected, build time lapses, send notifications or tweets, and automatically sync. images to Dropbox or Google Drive.\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eAssembled size (not including suction cups or desk stand) of OctoCam is 80x73.5x14mm (HxWxD).\u003c\/p\u003e\n\u003cp style=\"color: white;\"\u003e\"... but then, they switched from the Swingline to the Boston stapler, but I kept my Swingline stapler because it didn't bind up as much, and I kept the staples for the Swingline stapler and it's not okay because if they take my stapler then I'll set the building on fire...\"\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":35517386952,"sku":"PIM286","price":39.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/zero-w-kits-10.jpg?v=1571270137"},{"product_id":"unicorn-hat-hd","title":"Unicorn HAT HD","description":"\u003cp\u003eWe've stepped up our LED game! Unicorn HAT HD crams 256 RGB LEDs, in a 16x16 matrix, onto a single HAT. High-definition rainbow goodness!\u003c\/p\u003e\n\u003cp\u003eYou can still use it for all of the same things as the regular Unicorn HAT, but with 4 times as many pixels it makes much more complex animations possible, including scrolling text, and even low resolution videos.\u003c\/p\u003e\n\u003cp\u003eThe bundled ninja diffuser makes the pixels look extra-shiny by providing some subtle diffusion, blurring the lines between each pixel. Simply use four of the nuts to space the diffuser slightly away from the HAT, and the other four to secure it.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.raspberrypi.org\/magpi-issues\/MagPi60.pdf\"\u003eThe MagPi\u003c\/a\u003e said that Unicorn HAT HAD had a \u003cem\u003e\"real wow factor\" \u003c\/em\u003eand that the \u003cem\u003e\"performance is excellent\"\u003c\/em\u003e in their five star review.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e256 RGB LED pixels in a 16x16 matrix\u003c\/li\u003e\n\u003cli\u003ePixels driven by ARM STM32F and three STP16CPC26 LED drivers\u003c\/li\u003e\n\u003cli\u003eBundled ninja diffuser, plus nuts and bolts\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/pinout.xyz\/pinout\/unicorn_hat_hd\"\u003eUnicorn HAT HD pinout\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with all 40-pin header Raspberry Pi models\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/unicorn-hat-hd\"\u003ePython library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eComes fully assembled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe ARM chip on Unicorn HAT HD does all of the heavy lifting, meaning that you can just bung data to it and it'll take care of the rest. It acts as the man-in-the-middle between your Pi and the three STP16CPC26 LED drivers that actually drive the LEDs.\u003c\/p\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eOur \u003ca href=\"https:\/\/github.com\/pimoroni\/unicorn-hat-hd\"\u003ePython library\u003c\/a\u003e will have your Unicorn HAT HD pooping out high-definition rainbows in a jiffy. There's a \u003ca href=\"https:\/\/github.com\/pimoroni\/unicorn-hat-hd\/tree\/master\/examples\"\u003estack of examples\u003c\/a\u003e too, to show you how to create slick animations, simulate the Game of Life, a forest fire or a flickering candle, and even scroll text!\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhoto-sensitivity warning:\u003c\/strong\u003e flashing, strobing, and patterns of lights may cause epileptic seizures. Always take care and immediately stop using if you feel unwell (dizziness, nausea, affected vision, eye twitching, disorientation).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e Unicorn HAT HD requires a \u0026gt;2A microUSB power supply for your Pi. We recommend the official Raspberry Pi power supply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- \nAha! You found it!\nCan you decrypt this message?\nISRYAEMFADCNDTAMORDVIARIIATOHT\nClue: two rails.\n--\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":38430582792,"sku":"PIM273","price":31.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/uhhd-1.jpg?v=1571270139"},{"product_id":"pico-hat-hacker","title":"Nano HAT Hacker","description":"\u003cp\u003eThe Black HAT Hacker in bijou form. It's Nano HAT Hacker (formerly known as Pico HAT Hacker)!\u003c\/p\u003e\n\u003cp\u003eNano HAT Hacker gives you full access to all 40 pins on your Pi, broken out at the top. It's a super-skinny 0.8mm PCB, like our SHIMs, so you can solder it right onto the pins on your Pi and still have enough height on a standard header to fit a HAT or pHAT on top.\u003c\/p\u003e\n\u003cp\u003eThere's handy labels for all of the pins, with BCM pin numbering on one side, and more descriptive labels on the other to show where the I2C, UART, SPI, PWM, and I2S pins are. You can solder the Pico HAT Hacker either way up, depending on which set of labels you find most useful.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note that Nano HAT Hacker is not compatible with the Raspberry Pi Pico.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBCM and descriptive pin labelling\u003c\/li\u003e\n\u003cli\u003eMounting holes (M2.5)\u003c\/li\u003e\n\u003cli\u003e0.8mm thick PCB\u003c\/li\u003e\n\u003cli\u003eCompatible with all 40-pin header Raspberry Pi models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eYou'll need to pick up an extra \u003ca href=\"\/en-eu\/products\/male-40-pin-2x20-hat-header\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e40-pin male header\u003c\/a\u003e to solder onto Nano HAT Hacker\u003c\/li\u003e\n\u003cli\u003eBe sparing with the solder when soldering Nano HAT Hacker onto the pins of your Pi, otherwise the solder will wick up the pins and you'll find it awkward to fit HATs\/pHATs on top\u003c\/li\u003e\n\u003cli\u003eDimensions: 65x19x0.8mm (LxWxH)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":39570302920,"sku":"PIM300","price":2.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Pico_HAT_Hacker_1_of_2.jpg?v=1571270139"},{"product_id":"button-shim","title":"Button SHIM","description":"\u003cp\u003eButton SHIM gives you five handy, physical buttons and an RGB status LED, and it's HAT and pHAT-compatible!\u003c\/p\u003e\n\u003cp\u003eOur SHIM-format boards are designed to be \u003cstrong\u003esoldered\u003c\/strong\u003e neatly onto your Pi's GPIO pins and still allow you to use \u003ca href=\"\/en-eu\/collections\/pimoroni-hats-and-phats\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHATs and pHATs\u003c\/a\u003e at the same time. Or solder the included female header onto Button SHIM and use it as a standalone board. The buttons and status LED stick out from the top edge of your Pi, making them easy to access.\u003c\/p\u003e\n\u003cp\u003eUse Button SHIM to add physical interaction and visual feedback to your project. It makes the perfect controller for our LED boards like \u003ca href=\"\/en-eu\/products\/unicorn-phat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eUnicorn pHAT\u003c\/a\u003e, \u003ca href=\"\/en-eu\/products\/mote\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMote\u003c\/a\u003e, and \u003ca href=\"\/en-eu\/products\/blinkt\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBlinkt!\u003c\/a\u003e Or why not use it with \u003ca href=\"\/en-eu\/products\/four-letter-phat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFour Letter pHAT\u003c\/a\u003e to turn your Pi into a proper alarm clock, or stopwatch\/timer?\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e5x tactile, right-angle push buttons\u003c\/li\u003e\n\u003cli\u003eSingle RGB LED (APA102)\u003c\/li\u003e\n\u003cli\u003eButtons driven through an IO expander (TCA9554A)\u003c\/li\u003e\n\u003cli\u003eSuper-slim SHIM-format board\u003c\/li\u003e\n\u003cli\u003e0.8mm thick PCB\u003c\/li\u003e\n\u003cli\u003eCan be used with HATs and pHATs\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/pinout.xyz\/pinout\/button_shim\"\u003eButton SHIM pinout\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with all 40-pin header Raspberry Pi models\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/button-shim\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePython library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e2x20 female header included\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRequires soldering\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause we've used an IO expander to read the button states and drive the LED, you'll still have full access to all of your Pi's pins, assuming the I2C address (\u003cspan class=\"pl-k\"\u003e0x\u003c\/span\u003e\u003cspan\u003e3f)\u003c\/span\u003e doesn't clash.\u003c\/p\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eWe've put together a one-line-installer to install the \u003ca href=\"https:\/\/github.com\/pimoroni\/button-shim\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eButton SHIM Python library\u003c\/a\u003e. You'll be up-and-running in a jiffy! There's even a few nice example programs showing how to use Button SHIM to control your Pi's audio, how to control the status LED, and how to mimic key presses.\u003c\/p\u003e\n\u003cp\u003eTo install the software, open a terminal and type\u003cspan\u003e \u003c\/span\u003e\u003ccode\u003ecurl https:\/\/get.pimoroni.com\/buttonshim | bash\u003c\/code\u003e\u003cspan\u003e \u003c\/span\u003eto run the one-line-installer.\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIt's important to install Button SHIM the correct way round, with the buttons facing outwards from your Pi, and the buttons on the top (check the photos on this page if you're unsure)\u003c\/li\u003e\n\u003cli\u003eBoard dimensions: 65x13x4.5mm (WxHxD, depth includes buttons)\u003c\/li\u003e\n\u003cli\u003eButton dimensions: 7x3.5x3.75 (WxHxD)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":42859718792,"sku":"PIM301","price":7.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/btn-shim-1.jpg?v=1571270141"},{"product_id":"phat-diffuser","title":"pHAT Diffuser","description":"\u003cp\u003eThis diffuser will give your pHAT lovely bokeh!\u003c\/p\u003e\n\u003cp\u003eCut from the finest frosted perspex, this little diffusion layer will soften the lights from your \u003ca href=\"\/en-eu\/products\/scroll-phat-hd\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eScroll pHAT HD\u003c\/a\u003e, \u003ca href=\"\/en-eu\/products\/unicorn-phat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eUnicorn pHAT\u003c\/a\u003e, or any other \u003ca href=\"\/en-eu\/search?type=product\u0026amp;q=phat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003epHAT\u003c\/a\u003e with lovely, blinky lights of your choosing.\u003c\/p\u003e\n\u003cp\u003eShips with 6 nuts that you can use to vary the distance between the diffuser and the pHAT to give a greater or lesser light spread, depending on your preference.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ca href=\"\/en-eu\/products\/raspberry-pi-zero-w\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaspberry Pi Zero W\u003c\/a\u003e and \u003ca href=\"\/en-eu\/products\/unicorn-phat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eUnicorn pHAT\u003c\/a\u003e not included!\u003c\/b\u003e\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":46421776712,"sku":"PIM309","price":2.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/pHAT_diffusor_2_of_4.jpg?v=1571270143"},{"product_id":"phat-stack","title":"pHAT Stack","description":"\u003cp\u003eA preposterous pile of peripherals on your Pi! Mix and match 3 HATs or 5 pHATs into a platter of functionality. Use pHAT Stack for specific setups and projects, or just as a handy way to use several HATs or pHATs at once.\u003c\/p\u003e\n\u003cp\u003epHAT Stack is the big brother to the \u003ca href=\"\/en-eu\/products\/mini-black-hat-hack3r\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMini Black HAT Hack3r\u003c\/a\u003e. It has 6 sets of 2x20 pin headers, one for connecting to your Pi with the included ribbon cable, and the other 5 for a mix of \u003ca href=\"\/en-eu\/search?q=\u0026amp;hPP=30\u0026amp;idx=shop.pimoroni.com.products\u0026amp;p=0\u0026amp;hFR%5Btags%5D%5B0%5D=Pi%20HATs%20%26%20Plates\u0026amp;hFR%5Bvendor%5D%5B0%5D=Pimoroni\u0026amp;type=product\u0026amp;is_v=1\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHATs and\/or pHATs\u003c\/a\u003e. The kits include rubber feet to hold pHAT Stack steady (and prevent it from scratching your desk), and metal standoffs to mount your HATs and pHATs firmly in a more permanent fashion.\u003c\/p\u003e\n\u003cp\u003eNote that you'll need to ensure that there aren't any pin clashes between the boards that you're using together. To check which pins are used by each board, check them on \u003ca href=\"https:\/\/pinout.xyz\/boards#manufacturer=Pimoroni\" target=\"_blank\" rel=\"noopener noreferrer\"\u003epinout.xyz\u003c\/a\u003e, or try the \u003ca href=\"https:\/\/pinout.xyz\/phatstack\" target=\"_blank\" rel=\"noopener noreferrer\"\u003epHAT Stack configurator\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003eCheck out our \u003ca href=\"https:\/\/learn.pimoroni.com\/tutorial\/sandyj\/getting-started-with-phat-stack\"\u003egetting started guide\u003c\/a\u003e for more tips on using pHAT Stack.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFive sets of 2x20 pin headers (plus one to connect to your Pi)\u003c\/li\u003e\n\u003cli\u003eHAT and pHAT mounting holes (M2.5) and labels\u003c\/li\u003e\n\u003cli\u003eHandy pinout, including BCM numbers and descriptive labels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKits include\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003epHAT Stack PCB\u003c\/li\u003e\n\u003cli\u003e6x 2x20 male GPIO pins (pre-soldered in fully assembled kit)\u003c\/li\u003e\n\u003cli\u003e5x pairs of black brass standoffs\u003c\/li\u003e\n\u003cli\u003e4x rubber non-slip feet\u003c\/li\u003e\n\u003cli\u003e40-way black GPIO ribbon cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProvided there aren't any clashes between the pins used by HATs and pHATs, you can get pretty crazy with the boards that you combine together. Boards like \u003ca href=\"\/en-eu\/products\/four-letter-phat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFour Letter pHAT\u003c\/a\u003e, \u003ca href=\"\/en-eu\/products\/scroll-phat-hd\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eScroll pHAT HD\u003c\/a\u003e, and \u003ca href=\"\/en-eu\/products\/unicorn-hat-hd\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eUnicorn HAT HD\u003c\/a\u003e are ideal for displaying data in dashboard-type setups, and boards like \u003ca href=\"\/en-eu\/products\/touch-phat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTouch pHAT\u003c\/a\u003e, \u003ca href=\"\/en-eu\/products\/piano-hat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePiano HAT\u003c\/a\u003e, and \u003ca href=\"\/en-eu\/products\/drum-hat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDrum HAT\u003c\/a\u003e let you add input to your projects. There are some suggested setups below.\u003c\/p\u003e\n\u003ch2\u003eSuggested setups\u003c\/h2\u003e\n\u003cp\u003eBuild an \u003ca href=\"https:\/\/learn.pimoroni.com\/tutorial\/sandyj\/build-an-itty-bitty-beat-box\"\u003e\u003cstrong\u003eitty-bitty beat box\u003c\/strong\u003e\u003c\/a\u003e with \u003ca href=\"\/en-eu\/products\/piano-hat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePiano HAT\u003c\/a\u003e, \u003ca href=\"\/en-eu\/products\/drum-hat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDrum HAT\u003c\/a\u003e, and \u003ca href=\"\/en-eu\/products\/speaker-phat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpeaker pHAT\u003c\/a\u003e. Because Piano HAT and Drum HAT use different I2C addresses, they'll work quite happily alongside each other. Speaker pHAT gives your beat box a built-in speaker.\u003c\/p\u003e\n\u003cp\u003eMake an \u003cstrong\u003ealarm clock\u003c\/strong\u003e, or even a \u003cstrong\u003eradio alarm clock\u003c\/strong\u003e, with \u003ca href=\"\/en-eu\/products\/four-letter-phat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFour Letter pHAT\u003c\/a\u003e, \u003ca href=\"\/en-eu\/products\/touch-phat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTouch pHAT\u003c\/a\u003e, and \u003ca href=\"\/en-eu\/products\/speaker-phat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSpeaker pHAT\u003c\/a\u003e. Display the time on Four Letter pHAT, use Touch pHAT to cancel or snooze the alarm, and Speaker pHAT to beep when the alarm goes off!\u003c\/p\u003e\n\u003cp\u003eCreate a \u003cstrong\u003eweather station with built-in dashboard\u003c\/strong\u003e using \u003ca href=\"\/en-eu\/products\/enviro-phat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEnviro pHAT\u003c\/a\u003e, \u003ca href=\"\/en-eu\/products\/four-letter-phat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFour Letter pHAT\u003c\/a\u003e, and \u003ca href=\"\/en-eu\/products\/scroll-phat-hd\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eScroll pHAT HD\u003c\/a\u003e. Show the current temperature on Four Letter pHAT, and a graph of recent temperature readings on Scroll pHAT HD.\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSolder yourself and PCB only kits require soldering\u003c\/li\u003e\n\u003cli\u003eWhen using HATs, be careful not to short pins on components on the underside of the HATs. A couple of pieces of insulating tape on the underside of the board can protect against this.\u003c\/li\u003e\n\u003cli\u003eBoard dimensions: 162x65x1.75mm(LxWxH)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Fully Assembled Kit","offer_id":48211324232,"sku":"PIM322","price":13.75,"currency_code":"GBP","in_stock":false},{"title":"Solder Yourself Kit","offer_id":48211324424,"sku":"PIM321","price":11.75,"currency_code":"GBP","in_stock":false},{"title":"PCB Only","offer_id":48211324488,"sku":"PIM320","price":6.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/pHAT_Stack_1_of_1.jpg?v=1571270144"},{"product_id":"bearables-fox-led-badge","title":"Bearables Fox LED Badge","description":"\u003cp\u003eA sleepy fox badge with 12 coloured LEDs and 12 light patterns, that's sewable, hackable, wearable, and adorable!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/en-eu\/collections\/bearables\"\u003eBearables\u003c\/a\u003e is a range of woodland-themed wearable LED badges and sensors. Wear the badges on their own, or connect them to one of the sensors with conductive thread to bring them to life. Designed for kids* (suggested age 8+) and grown-up kids alike!\u003c\/p\u003e\n\u003cp\u003eAttach your badge using thread (normal or conductive), a safety pin, a small disc magnet, or some double-sided sticky tape.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cem\u003e*Contains small parts. Not suitable for children 3 years or younger. This is not a toy. Keep battery out of reach of children. If ingested, seek medical help immediately.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eKit contains\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFox badge with 12 LEDs (multi-coloured)\u003c\/li\u003e\n\u003cli\u003eCR2032 3V coin cell battery\u003c\/li\u003e\n\u003cli\u003eSticker sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e12 coloured LEDs (blue, green, yellow, orange, red, pink)\u003c\/li\u003e\n\u003cli\u003e12 light patterns\u003c\/li\u003e\n\u003cli\u003eMulti-functional button (mode change, sleep, trigger mode)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/www.microchip.com\/wwwproducts\/en\/PIC16F1503\"\u003ePIC16F1503\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003emicrocontroller\u003c\/li\u003e\n\u003cli\u003eTwo sewable hooks\u003c\/li\u003e\n\u003cli\u003eCompatible with \u003ca href=\"\/en-eu\/collections\/bearables\"\u003eBearables\u003c\/a\u003e analog sensors\u003c\/li\u003e\n\u003cli\u003eBattery life of 3-4 days with a CR2032 coin cell battery\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUsing your Bearables badge\u003c\/h2\u003e\n\u003cp\u003ePress the multi-functional button on your badge briefly to cycle through the light patterns. Each of the LEDs will light to indicate which of the 12 patterns is currently selected. Press and hold the button to put your badge into sleep mode.\u003c\/p\u003e\n\u003cp\u003eThe nifty design of the badges and sensors means that it's super-simple to connect them. It doesn't matter which way round they're connected. Just connect one hook on the badge to one hook on the sensor with conductive thread, then do the same with the other two hooks.\u003c\/p\u003e\n\u003cp\u003eOnce a sensor is connected, press and hold the multi-functional button to put your badge into trigger mode. Now when you trigger the sensor, the LED lights on your badge will light up.\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBearables badges and sensors are not waterproof or washable\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eEnsure that the two pieces of conductive thread connecting your Bearables badge and sensor do not touch, bearing (pun intended) in mind that they may touch when the fabric is creased or folded. Nothing bad will happen, the sensor just won't work as it should.\u003c\/li\u003e\n\u003cli\u003eThe hooks on the back can be shorted without any damage to the badge, although it may trigger the LEDs similar to triggering them with a sensor. A painted or coated safety pin will work better than a bare metal one.\u003c\/li\u003e\n\u003cli\u003eA dab of clear nail varnish on the conductive thread around the hook can help to give a better, more reliable connection\u003c\/li\u003e\n\u003cli\u003eDimensions: 47x35x5mm (LxWxH)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":528331800584,"sku":"PIM314","price":6.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/bearables-shop-grande-11.jpg?v=1571270148"},{"product_id":"bearables-acorn-motion-sensor","title":"Bearables Acorn Motion Sensor","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eAn adorable acorn sensor to connect to and trigger your Bearables badge.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/en-eu\/collections\/bearables\"\u003eBearables\u003c\/a\u003e is a range of woodland-themed wearable LED badges and sensors. Wear the badges on their own, or connect them to one of the sensors with conductive thread to bring them to life. Designed for kids* (suggested age 8+) and grown-up kids alike!\u003c\/p\u003e\n\u003cp\u003eAttach the acorn motion sensor to a \u003ca href=\"\/en-eu\/collections\/bearables\"\u003eBearables badge\u003c\/a\u003e and when you move the sensor your badge's LEDs will light up.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cem\u003e*Contains small parts. Not suitable for children 3 years or younger. This is not a toy.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eKit contains\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAcorn motion sensor\u003c\/li\u003e\n\u003cli\u003eSticker sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTilt switch motion sensor\u003c\/li\u003e\n\u003cli\u003eTwo sewable hooks\u003c\/li\u003e\n\u003cli\u003eCompatible with \u003ca href=\"\/en-eu\/collections\/bearables\"\u003eBearables badges\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUsing your Bearables sensor\u003c\/h2\u003e\n\u003cp\u003eThe nifty design of the badges and sensors means that it's super-simple to connect them. It doesn't matter which way round they're connected. Just connect one hook on the badge to one hook on the sensor with conductive thread, then do the same with the other two hooks.\u003c\/p\u003e\n\u003cp\u003eOnce a sensor is connected, press and hold the multi-functional button to put your badge into trigger mode. Now when you trigger the sensor, the LED lights on your badge will light up.\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBearables badges and sensors are not waterproof or washable\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eEnsure that the two pieces of conductive thread connecting your Bearables badge and sensor do not touch, bearing (pun intended) in mind that they may touch when the fabric is creased or folded. Nothing bad will happen, the sensor just won't work as it should.\u003c\/li\u003e\n\u003cli\u003eA dab of clear nail varnish on the conductive thread around the hook can help to give a better, more reliable connection\u003c\/li\u003e\n\u003cli\u003eDimensions: 25x18x4mm (LxWxH)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":528333701128,"sku":"PIM316","price":3.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/bearables-shop-grande-12.jpg?v=1571270148"},{"product_id":"bearables-flower-light-sensor","title":"Bearables Flower Light Sensor","description":"\u003cp\u003eA cute flower light sensor to connect to and trigger your Bearables badge.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/en-eu\/collections\/bearables\"\u003eBearables\u003c\/a\u003e is a range of woodland-themed wearable LED badges and sensors. Wear the badges on their own, or connect them to one of the sensors with conductive thread to bring them to life. Designed for kids* (suggested age 8+) and grown-up kids alike!\u003c\/p\u003e\n\u003cp\u003eAttach the flower light sensor to a \u003ca href=\"\/en-eu\/collections\/bearables\"\u003eBearables badge\u003c\/a\u003e and when you cover the sensor or when it's dark your badge's LEDs will light up.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cem\u003e*Contains small parts. Not suitable for children 3 years or younger. This is not a toy.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eKit contains\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFlower light sensor\u003c\/li\u003e\n\u003cli\u003eSticker sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLight sensor with two phototransistors\u003c\/li\u003e\n\u003cli\u003eTwo sewable hooks\u003c\/li\u003e\n\u003cli\u003eCompatible with \u003ca href=\"\/en-eu\/collections\/bearables\"\u003eBearables badges\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUsing your Bearables sensor\u003c\/h2\u003e\n\u003cp\u003eThe nifty design of the badges and sensors means that it's super-simple to connect them. It doesn't matter which way round they're connected. Just connect one hook on the badge to one hook on the sensor with conductive thread, then do the same with the other two hooks.\u003c\/p\u003e\n\u003cp\u003eOnce a sensor is connected, press and hold the multi-functional button to put your badge into trigger mode. Now when you trigger the sensor, the LED lights on your badge will light up.\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBearables badges and sensors are not waterproof or washable\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eEnsure that the two pieces of conductive thread connecting your Bearables badge and sensor do not touch, bearing (pun intended) in mind that they may touch when the fabric is creased or folded. Nothing bad will happen, the sensor just won't work as it should.\u003c\/li\u003e\n\u003cli\u003eA dab of clear nail varnish on the conductive thread around the hook can help to give a better, more reliable connection\u003c\/li\u003e\n\u003cli\u003eDimensions: 17x17x5mm (LxWxH)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":528334356488,"sku":"PIM317","price":3.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/bearables-shop-grande-9.jpg?v=1571270148"},{"product_id":"maker-essentials-leds-resistors","title":"Maker Essentials - LEDs \u0026 Resistors","description":"\u003cp\u003eAdd some light to your project with this selection of over 50 colourful LEDs. They come with current-limiting resistors to protect the element, and allow you to control the brightness.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/en-eu\/collections\/maker-essentials\"\u003eMaker Essentials\u003c\/a\u003e are components and useful bits for everyday electronics and tech projects.\u003c\/p\u003e\n\u003ch2\u003eKit contains\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e10mm LEDs\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e1x red\u003c\/li\u003e\n\u003cli\u003e1x green\u003c\/li\u003e\n\u003cli\u003e1x yellow\u003c\/li\u003e\n\u003cli\u003e1x blue\u003c\/li\u003e\n\u003cli\u003e1x white\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e5mm LEDs\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e5x red\u003c\/li\u003e\n\u003cli\u003e5x green\u003c\/li\u003e\n\u003cli\u003e5x yellow\u003c\/li\u003e\n\u003cli\u003e5x blue\u003c\/li\u003e\n\u003cli\u003e5x white\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e3mm LEDs\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e5x red\u003c\/li\u003e\n\u003cli\u003e5x green\u003c\/li\u003e\n\u003cli\u003e5x yellow\u003c\/li\u003e\n\u003cli\u003e5x blue\u003c\/li\u003e\n\u003cli\u003e5x white\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e25x 330Ω resistors\u003c\/li\u003e\n\u003cli\u003e10x 100Ω resistors\u003c\/li\u003e\n\u003cli\u003e10x 1kΩ resistors\u003c\/li\u003e\n\u003cli\u003e10x 10kΩ resistors\u003c\/li\u003e\n\u003cli\u003e10x 100kΩ resistors\u003c\/li\u003e\n\u003cli\u003e10x 1MΩ resistors\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":1062664830984,"sku":"PIM244","price":5.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Kit_7_of_7.jpg?v=1571270149"},{"product_id":"maker-essentials-various-headers","title":"Maker Essentials - Various Headers","description":"\u003cp\u003eIf you're going to be adding and removing wires to a project, these 2.54 pitch headers are an ideal way to make it easy and reliable. This box has a useful selection.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/en-eu\/collections\/maker-essentials\"\u003eMaker Essentials\u003c\/a\u003e are components and useful bits for everyday electronics and tech projects.\u003c\/p\u003e\n\u003ch2\u003eKit contains\u003c\/h2\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003e 2x male 2.54mm 2x20 header\u003c\/li\u003e\n\u003cli\u003e10x male 2.54mm 1x20 header\u003c\/li\u003e\n\u003cli\u003e4x  male 2.54mm 2x3 header\u003c\/li\u003e\n\u003cli\u003e2x male 2.54mm 1x20 right-angle header\u003c\/li\u003e\n\u003cli\u003e2x male 2.54mm 2x20 right-angle header\u003c\/li\u003e\n\u003cli\u003e2x female 2.54mm 2x20 header\u003c\/li\u003e\n\u003cli\u003e4x female 2.54mm 2x3 header\u003c\/li\u003e\n\u003cli\u003e6x female 2.54mm 1x10 header\u003c\/li\u003e\n\u003cli\u003e6x female 2.54mm 1x8 header\u003c\/li\u003e\n\u003cli\u003e6x female 2.54mm 1x6 header\u003c\/li\u003e\n\u003cli\u003e6x 2.54mm jumper with handle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":1062665748488,"sku":"PIM247","price":5.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Kit_3_of_7.jpg?v=1571270149"},{"product_id":"maker-essentials-mini-breadboards-jumper-jerky","title":"Maker Essentials - Mini Breadboards \u0026 Jumper Jerky","description":"\u003cp\u003eHook up simple circuits and components. The breadboards can hold LEDs and chips, and the Jumper Jerky will connect them to other components and then to your Raspberry Pi or Arduino. Great for prototyping!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/en-eu\/collections\/maker-essentials\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMaker Essentials\u003c\/a\u003e are components and useful bits for everyday electronics and tech projects.\u003c\/p\u003e\n\u003ch2\u003eKit contains\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x mini breadboards\u003c\/li\u003e\n\u003cli\u003e10x short socket to socket jumper jerky\u003c\/li\u003e\n\u003cli\u003e10x short pin to socket jumper jerky\u003c\/li\u003e\n\u003cli\u003e10x short pin to pin jumper jerky\u003c\/li\u003e\n\u003cli\u003e10x long socket to socket jumper jerky\u003c\/li\u003e\n\u003cli\u003e10x long pin to socket jumper jerky\u003c\/li\u003e\n\u003cli\u003e10x long pin to pin jumper jerky\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":1062666207240,"sku":"PIM245","price":9.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Kit_6_of_7.jpg?v=1675095655"},{"product_id":"maker-essentials-micro-motors-grippy-wheels","title":"Maker Essentials - Micro-motors \u0026 Grippy Wheels","description":"\u003cp\u003eThese little motors are an ideal plug-and-go solution for your next robot explorer. They even come with adaptors for LEGO® and mounts to attach to your project.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/en-eu\/collections\/maker-essentials\"\u003eMaker Essentials\u003c\/a\u003e are components and useful bits for everyday electronics and tech projects.\u003c\/p\u003e\n\u003ch2\u003eKit contains\u003c\/h2\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003e2x micro metal-gear motors, 298:1, 75RPM\u003c\/li\u003e\n\u003cli\u003e2x grippy wheels\u003c\/li\u003e\n\u003cli\u003e2x LEGO® shaft adaptors\u003c\/li\u003e\n\u003cli\u003e2x motor mounts\u003c\/li\u003e\n\u003cli\u003e4x mounting bolts\u003c\/li\u003e\n\u003cli\u003e5x mounting nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":1062666665992,"sku":"PIM246","price":22.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Kit_2_of_7.jpg?v=1571270149"},{"product_id":"maker-essentials-switches-potentiometers","title":"Maker Essentials - Switches \u0026 Potentiometers","description":"\u003cp\u003eEssential for control of your project, this range of variable resistors and switches are ideal for taking control.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/en-eu\/collections\/maker-essentials\"\u003eMaker Essentials\u003c\/a\u003e are components and useful bits for everyday electronics and tech projects.\u003c\/p\u003e\n\u003ch2\u003eKit contains\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e5x 3mm tactile switches\u003c\/li\u003e\n\u003cli\u003e5x 6mm tactile switches\u003c\/li\u003e\n\u003cli\u003e5x 12mm tactile switches\u003c\/li\u003e\n\u003cli\u003e5x circular caps for 12mm tactile switches\u003c\/li\u003e\n\u003cli\u003e5x square caps for 12mm tactile switches\u003c\/li\u003e\n\u003cli\u003e1x 1kΩ rotary potentiometer\u003c\/li\u003e\n\u003cli\u003e1x 10kΩ rotary potentiometer\u003c\/li\u003e\n\u003cli\u003e1x 100kΩ rotary potentiometer\u003c\/li\u003e\n\u003cli\u003e3x potentiometer knobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":1062667124744,"sku":"PIM248","price":7.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Kit_1_of_2.jpg?v=1571270149"},{"product_id":"bearables-fox-kit","title":"Bearables Fox Kit","description":"\u003cp\u003eA complete Bearables Fox Kit with coloured LED badge, light sensor, thread, needles, and battery.  Sewable, hackable, wearable, adorable!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/en-eu\/collections\/bearables\"\u003eBearables\u003c\/a\u003e is a range of woodland-themed wearable LED badges and sensors. Wear the badges on their own, or connect them to one of the sensors with conductive thread to bring them to life. Designed for kids* (suggested age 8+) and grown-up kids alike!\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eAttach the flower light sensor to the Fox badge and when you cover the sensor or when it's dark your badge's LEDs will light up.\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eIn their five star review, \u003ca href=\"https:\/\/www.raspberrypi.org\/magpi-issues\/MagPi65.pdf\"\u003eThe MagPi\u003c\/a\u003e said that Bearables were \u003cem\u003e\"e\u003c\/em\u003e\u003cem\u003excellent value for money\"\u003c\/em\u003e and that \u003cem\u003e\"the badge kit has everything you need to sew your interactive badge and sensor to clothes\"\u003c\/em\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cem\u003e*Contains small parts. Not suitable for children 3 years or younger. This is not a toy. Keep battery out of reach of children. If ingested, seek medical help immediately.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eKit contains\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFox badge with 12 LEDs (multi-coloured)\u003c\/li\u003e\n\u003cli\u003eFlower light sensor\u003c\/li\u003e\n\u003cli\u003e3m stainless steel conductive thread\u003c\/li\u003e\n\u003cli\u003e3 sewing needles\u003c\/li\u003e\n\u003cli\u003eCR2032 3V coin cell battery\u003c\/li\u003e\n\u003cli\u003e2x sticker sheets\u003c\/li\u003e\n\u003cli\u003eInstructions\u003c\/li\u003e\n\u003cli\u003eReusable box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e12 coloured LEDs (blue, green, yellow, orange, red, pink)\u003c\/li\u003e\n\u003cli\u003e12 light patterns\u003c\/li\u003e\n\u003cli\u003eMulti-functional button (mode change, sleep, trigger mode)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/www.microchip.com\/wwwproducts\/en\/PIC16F1503\"\u003ePIC16F1503\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003emicrocontroller\u003c\/li\u003e\n\u003cli\u003eSewable hooks\u003c\/li\u003e\n\u003cli\u003eLight sensor with two phototransistors\u003c\/li\u003e\n\u003cli\u003eBattery life of 3-4 days with a CR2032 coin cell battery\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUsing your Bearables badge\u003c\/h2\u003e\n\u003cp\u003ePress the multi-functional button on your badge briefly to cycle through the light patterns. Each of the LEDs will light to indicate which of the 12 patterns is currently selected. Press and hold the button to put your badge into sleep mode.\u003c\/p\u003e\n\u003cp\u003eThe nifty design of the badges and sensors means that it's super-simple to connect them. It doesn't matter which way round they're connected. Just connect one hook on the badge to one hook on the sensor with conductive thread, then do the same with the other two hooks.\u003c\/p\u003e\n\u003cp\u003eOnce a sensor is connected, press and hold the multi-functional button to put your badge into trigger mode. Now when you trigger the sensor, the LED lights on your badge will light up.\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBearables badges and sensors are not waterproof or washable\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBe aware that conductive thread is sharp!\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eEnsure that the two pieces of conductive thread connecting your Bearables badge and sensor do not touch, bearing (pun intended) in mind that they may touch when the fabric is creased or folded. Nothing bad will happen, the sensor just won't work as it should.\u003c\/li\u003e\n\u003cli\u003eThe hooks on the back can be shorted without any damage to the badge, although it may trigger the LEDs similar to triggering them with a sensor. A painted or coated safety pin will work better than a bare metal one.\u003c\/li\u003e\n\u003cli\u003eA dab of clear nail varnish on the conductive thread around the hook can help to give a better, more reliable connection\u003c\/li\u003e\n\u003cli\u003eBadge dimensions: 47x35x5mm (LxWxH)\u003c\/li\u003e\n\u003cli\u003eSensor dimensions: 17x17x5mm (LxWxH)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":1062776733704,"sku":"PIM318","price":13.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/bearables-shop-grande-2.jpg?v=1571270150"},{"product_id":"pimoroni-pin-party-enamel-pin-badge","title":"Pimoroni Pin Party Enamel Pin Badge","description":"\u003cp\u003eLevel up your lapel with our Pimoroni Pin Party enamel pin badges!\u003c\/p\u003e\n\u003cp\u003eThese soft enamel pin badges will bring a touch of geek chic to your jacket, bag, or hat (the sort you wear on your head!), and come in four different fun designs. The rubber backs will hold your pins securely on the high seas!\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Picade","offer_id":1534324899848,"sku":"PIM325","price":2.25,"currency_code":"GBP","in_stock":true},{"title":"Pibow","offer_id":1534324932616,"sku":"PIM328","price":2.25,"currency_code":"GBP","in_stock":true},{"title":"Component Pizza","offer_id":1534324965384,"sku":"PIM326","price":2.25,"currency_code":"GBP","in_stock":true},{"title":"#LASERLIFE","offer_id":1534324998152,"sku":"PIM327","price":2.25,"currency_code":"GBP","in_stock":true},{"title":"Four Pin Bundle","offer_id":1534325030920,"sku":"PIM329","price":5.5,"currency_code":"GBP","in_stock":true},{"title":"MAKING","offer_id":20023277715526,"sku":"PIM405","price":2.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/EnamelPinsBig-2.jpg?v=1571270152"},{"product_id":"wide-input-shim","title":"Wide Input SHIM","description":"\u003cp\u003ePower your Pi with a wide range of (DC) input voltages from 3 to 16V!\u003c\/p\u003e\n\u003cp\u003eWide Input SHIM lets you use a range of different DC power supplies with your Pi, including the ubiquitous 12V barrel jack power supplies. It's super-skinny, so you can solder it straight to your Pi's pins and still use HATs and pHATs on top.\u003c\/p\u003e\n\u003cp\u003eThe barrel jack connector on Wide Input SHIM is a 3.5mm outer diameter (OD), 1.3mm inner diameter one, and there's a short male to female adapter cable included to allow you to use the common 5.5mm OD barrel jacks too.\u003c\/p\u003e\n\u003cp\u003eThere's also a short cable included with a 3.5mm OD barrel jack on one end and tinned wires on the other, in case you want to attach it directly to something like a bench power supply or to solder it into a project.\u003c\/p\u003e\n\u003cp\u003eIf you need a longer power cable, then there's a 1.5m long 3.5mm OD male to tinned wires cable available separately.\u003c\/p\u003e\n\u003ch2\u003eKit includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWide Input SHIM\u003c\/li\u003e\n\u003cli\u003e2x6 female header (\u003cstrong\u003erequires soldering\u003c\/strong\u003e)\u003c\/li\u003e\n\u003cli\u003e3.5mm OD male to 5.5mm OD female adapter cable (15cm long)\u003c\/li\u003e\n\u003cli\u003e3.5mm OD male to tinned wires cable (15cm long)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSuper-small SHIM-format board\u003c\/li\u003e\n\u003cli\u003e0.8mm thick PCB\u003c\/li\u003e\n\u003cli\u003eCan be used with HATs and pHATs\u003c\/li\u003e\n\u003cli\u003e3.5mm outer diameter barrel jack connector (centre positive)\u003c\/li\u003e\n\u003cli\u003eAdapter cables included\u003c\/li\u003e\n\u003cli\u003eTPS630701 buck-boost converter chip (\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/tps63070.pdf?4184684033596395658\" target=\"_blank\" rel=\"noopener noreferrer\"\u003edata sheet\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e5V \/ up to 2A output\u003c\/li\u003e\n\u003cli\u003e3-16V input (DC)\u003c\/li\u003e\n\u003cli\u003eReverse voltage protection\u003c\/li\u003e\n\u003cli\u003eEN (enable) pin to switch off output voltage (pull to ground)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRequires soldering\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eYou can supply a range of DC input voltages to Wide Input SHIM, either through the centre positive 3.5mm outer diameter barrel jack connector, or through the two broken-out + and - pins on the SHIM.\u003c\/p\u003e\n\u003cp\u003eThe board will provide 5V\/2A output (through the GPIO to the Pi) at input voltages of 5V to 16V. Current drops to 1.5A at 4V, and 1A at 3V.\u003c\/p\u003e\n\u003cp\u003ePulling the EN (enable) pin to ground will cut the 5V voltage output, although it should be noted that you should shut your Pi down cleanly before doing this!\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 45x17x6mm (LxBxH)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUsing both micro-USB power and Wide Input SHIM power at the same time is not recommended with Pi Zero \/ W where there is no protection against back-powering\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Wide Input SHIM kit","offer_id":1543923007496,"sku":"PIM271","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"1.5m long power cable","offer_id":1543923040264,"sku":"CAB1100","price":1.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Wide_Input_SHIM_3_of_5.jpg?v=1571270153"},{"product_id":"pibow-for-raspberry-pi-3-b-plus","title":"Pibow 3 B+ (Raspberry Pi 3 B+, 3, \u0026 2)","description":"\u003cp\u003ePibow. The most stylish, add-on friendly, and protective case for the Raspberry Pi 3 B+!\u003c\/p\u003e\n\u003cp\u003eWe've redesigned Pibow to be compatible with the Raspberry Pi 3 B+, 3, and 2. Due to changes in the layout of the Raspberry Pi 3 B+, older Pibows (ones with a 3\/2\/B+ label) will not work ideally with Raspberry Pi 3 B+!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 3 B+, 3, and 2\u003c\/li\u003e\n\u003cli\u003eFully HAT-compatible\u003c\/li\u003e\n\u003cli\u003eWorks great with \u003ca href=\"\/en-eu\/products\/brass-m2-5-standoffs-for-pi-hats-black-plated-pack-of-2\" target=\"_blank\" rel=\"noopener noreferrer\"\u003estandoffs\u003c\/a\u003e!\u003c\/li\u003e\n\u003cli\u003eProtects your beloved Pi!\u003c\/li\u003e\n\u003cli\u003eNow includes a free extension layer\u003c\/li\u003e\n\u003cli\u003eEtched port markings and cable escapes\u003c\/li\u003e\n\u003cli\u003eClear top and base leave Raspberry Pi visible\u003c\/li\u003e\n\u003cli\u003eLeaves all ports accessible\u003c\/li\u003e\n\u003cli\u003eMade from lightweight, high-quality, cast acrylic\u003c\/li\u003e\n\u003cli\u003eGreat for hacking and tinkering!\u003c\/li\u003e\n\u003cli\u003eMade in Sheffield, UK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCrafted out of ten unique layers, including a transparent top and base, that leave your beautiful Pi visible inside. Each layer is laser-cut from colourful, high-quality, cast acrylic and once stacked they securely contain a Raspberry Pi 3 B+, 3, or 2, while leaving the primary ports, including the camera port, and display port accessible.\u003c\/p\u003e\n\u003cp\u003eWeighing just over 90 grams, the case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly. The dimensions are: 99x66x30mm (WxLxH, not including bolt heads and nuts).\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Rainbow","offer_id":12061715595334,"sku":"PIM339","price":11.75,"currency_code":"GBP","in_stock":false},{"title":"Ninja","offer_id":12061715628102,"sku":"PIM340","price":11.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Variant_2_of_2.jpg?v=1571270154"},{"product_id":"pibow-coupe-for-raspberry-pi-3-b-plus","title":"Pibow 3 B+ Coupé (Raspberry Pi 3 B+, 3, \u0026 2)","description":"\u003cp\u003ePibow Coupé. The slim, hackable, and attractive case for the Raspberry Pi!\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e We've redesigned Pibow \u003cspan\u003eCoupé\u003c\/span\u003e to be compatible with the Raspberry Pi 3 B+, 3, and 2. Due to changes in the layout of the Raspberry Pi 3 B+, older Pibows (ones with a 3\/2\/B+ label) will not work with Raspberry Pi 3 B+!\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 3 B+, 3, and 2\u003c\/li\u003e\n\u003cli\u003eExtra venting, and a place for installing a heatsink if you really want to push your Pi\u003c\/li\u003e\n\u003cli\u003eSuper-slimline profile\u003c\/li\u003e\n\u003cli\u003eFully HAT-compatible\u003c\/li\u003e\n\u003cli\u003eWorks great with \u003ca href=\"\/en-eu\/products\/brass-m2-5-standoffs-for-pi-hats-black-plated-pack-of-2\" target=\"_blank\" rel=\"noopener noreferrer\"\u003estandoffs\u003c\/a\u003e!\u003c\/li\u003e\n\u003cli\u003eProtects your beloved Pi!\u003c\/li\u003e\n\u003cli\u003eClear top and base leave Raspberry Pi visible\u003c\/li\u003e\n\u003cli\u003eGPIO cut-out with laser-etched pin labels\u003c\/li\u003e\n\u003cli\u003eLeaves all ports accessible\u003c\/li\u003e\n\u003cli\u003eMade from lightweight, high-quality, cast acrylic\u003c\/li\u003e\n\u003cli\u003eGreat for hacking and tinkering!\u003c\/li\u003e\n\u003cli\u003eMade in Sheffield, UK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCrafted out of five unique layers including a transparent top and base that leave your beautiful Pi visible inside. Each layer is laser-cut from colourful, high-quality, cast acrylic and once stacked they securely contain a Raspberry Pi 3 B+, 3, or 2 while leaving the primary ports, including the camera port, display port, and GPIO accessible.\u003c\/p\u003e\n\u003cp\u003eWeighing just over 50 grams, the case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly. The dimensions are: 99x66x15mm (WxLxH, not including bolt heads and nuts).\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Coupé Red","offer_id":12061717921862,"sku":"PIM341","price":7.75,"currency_code":"GBP","in_stock":false},{"title":"Coupé Ninja","offer_id":12061717954630,"sku":"PIM342","price":7.75,"currency_code":"GBP","in_stock":false},{"title":"Coupé Flotilla","offer_id":12061717987398,"sku":"PIM344","price":7.75,"currency_code":"GBP","in_stock":false},{"title":"Coupé Royale","offer_id":12061718020166,"sku":"PIM343","price":7.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Variant_1_of_4_11dadd25-f205-4b9e-9206-32ff25db867a.jpg?v=1571270154"},{"product_id":"pibow-pitft","title":"Pibow PiTFT+","description":"\u003cp\u003eSupport and protect your PiTFT+ and Raspberry Pi with this stylish and unique case!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 3 B+, 3, \u0026amp; 2, but not with the original model B or B+\u003c\/li\u003e\n\u003cli\u003eCustom top layers provided for both the \u003ca href=\"\/en-eu\/products\/pitft-plus-320x240-2-8-tft-resistive-touchscreen-pi-2-and-model-a-b\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e2.8\" 320x240\u003c\/a\u003e and the \u003ca href=\"\/en-eu\/products\/pitft-plus-480x320-3-5-tft-touchscreen-for-raspberry-pi-pi-2-and-model-a-b\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e3.5\" 480x320\u003c\/a\u003e PiTFT+ variants\u003c\/li\u003e\n\u003cli\u003eProtects your beloved Pi!\u003c\/li\u003e\n\u003cli\u003eLeaves all primary ports accessible\u003c\/li\u003e\n\u003cli\u003eMade from lightweight high-quality cast acrylic\u003c\/li\u003e\n\u003cli\u003eGreat for hacking and tinkering!\u003c\/li\u003e\n\u003cli\u003eMade in Sheffield, UK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCrafted out of eleven unique layers, each laser-cut from colourful high-quality cast acrylic and once stacked they securely contain a Raspberry Pi 3 B+, 3 or 2 while leaving the primary ports accessible.\u003c\/p\u003e\n\u003cp\u003eWeighing only 92 grams the case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly.\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIf using with the 480x320 3.5\" PiTFT+, you will need to remove the mounting holes from the side of the PiTFT board (they're designed to be broken off cleanly)\u003c\/li\u003e\n\u003cli\u003eThis product is the \u003cstrong\u003ePibow\u003c\/strong\u003e PiTFT+ only, Raspberry Pi and PiTFT+ are not included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":12070981042246,"sku":"PIM345","price":13.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/PiTFT_PLus_1_of_3_ac52e626-5279-4242-9b55-42b10528f8f2.jpg?v=1571270155"},{"product_id":"micro-bit-accessories-kit","title":"micro:bit accessories kit","description":"\u003cp\u003eHandy accessories to get you started with micro:bit!\u003c\/p\u003e\n\u003cp\u003eThis dandy little kit has a battery pack for portable projects, and a micro-USB cable to connect your micro:bit to your computer to start your coding adventures.\u003c\/p\u003e\n\u003cp\u003eThe battery pack contains two AAA batteries and has a switch to turn the power on and off. It connects to your micro:bit with the attached JST adaptor.\u003c\/p\u003e\n\u003cp\u003eThe micro-USB cable connects your micro:bit and your computer ,and provides power and data (for coding) connections. Easy!\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: colour of micro-USB cable may vary!\u003c\/em\u003e\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":12072607383622,"sku":"PIM349","price":3.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Kit_v2_db83ade4-3ef5-47be-ab27-e5e754e5b03f.jpg?v=1571270155"}],"url":"https:\/\/wholesale.pimoroni.com\/en-eu\/collections\/pimoroni.oembed","provider":"Pimoroni Wholesale","version":"1.0","type":"link"}