{"title":"Components","description":"","products":[{"product_id":"gpio-header-for-raspberrypi-a-b-pi-2-tall-2x20-female-header","title":"GPIO Header for RaspberryPi A+\/B+\/Pi 2\/Pi 3 - Tall 2x20 Female Header","description":"\u003cp\u003eConnect your own PCB to a Raspberry Pi with this extra-tall female header.\u003c\/p\u003e\n\u003cp\u003eThe female header part has extra spaces to make it 16.5mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. This header has 3mm of pins. With 3mm you don't have to cut the really long pins, so its ideal for basic Pi plate design\u003c\/p\u003e\n\u003cp\u003eYou'll get one header per order.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/PBD-2.54-2xXXP-GF_H_8.5_2.pdf?8027746389094869442\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDatasheet\u003c\/a\u003e\u003c\/p\u003e","brand":"Generic","offers":[{"title":"Default Title","offer_id":1304300112,"sku":"COM0004","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Tall_2x20_Female_Header_2_of_2.JPG?v=1576144680"},{"product_id":"reflective-ir-sensor-with-470-and-10k-resistors","title":"Reflective IR Sensor with 470 and 10K Resistors","description":"\u003cp\u003eA breadboard friendly reflective IR sensor\u003c\/p\u003e\n\u003cp\u003eThis \u003cstrong\u003eReflective IR Sensor\u003c\/strong\u003e is a simple plastic casing with two elements - an IR LED and an IR phototransistor. You can control the IR LED and turn it on to bounce IR off objects to determine their reflectivity. White \u0026amp; light colored stuff will bounce the light, so  you can detect it. Black \u0026amp; dark colored stuff will absorb the IR light so that it isn't detected. Likewise, if something isn't in the way of the sensor, it won't trigger either. \u003c\/p\u003e\n\u003cp\u003eThese sensors are handy when you want to detect if something has passed by the sensor, or a very simple hand-detector. Also sometimes these are used as rotary encoder, if the encoder wheel has black and white stripes, the photo sensor is fast enough to tell you the RPM.\u003c\/p\u003e\n\u003cp\u003eComes with a 470 ohm resistor (for biasing the IR LED) and a 10K resistor which you can use as a pull-up resistor for the phototransistor. The sensor is breadboard friendly and easy to solder to.\u003c\/p\u003e\n\u003cp\u003eThis works best when detecting a light-colored object approximately 5mm away - 2mm to 10mm worked fairly well but your results may vary with the LED brightness, object shininess, etc.\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":1304300164,"sku":"ADA2349","price":1.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/2349-00_13981d64-13fb-4113-be56-9de9bf1d8ae5.gif?v=1571270024"},{"product_id":"adafruit-bone-conductor-transducer-with-wires-8-ohm-1-watt","title":"Bone Conductor Transducer with Wires - 8 Ohm 1 Watt","description":"\u003cp\u003eThis incredible speaker does not have a moving cone like most speakers you've seen, instead, a small metal rod is wrapped with the voice coil.\u003c\/p\u003e\n\u003cp\u003eWhen current is pulsed through the coil, the magnetic field causes a piece of metal to expand and contract - if pressed against a flat surface or cavity it turns it into a speaker!\u003c\/p\u003e\n\u003cp\u003eOften these size transducers are pressed up against the jaw or ear bone to turn the skull into a speaker cavity. The effect is a perfect quality sound that is coming from within your head that nobody else can hear. You can also press it against your elbow bone and stick a finger in your ear to hear the audio transmitted through your arm! Since no air is required, we've seen this kind of module covered in plastic so it can be used for waterproof 'underwater' headphones for swimmers. Other fun tricks you can try: press it against a table or wall to make a flat speaker, or at the end of a plastic cup to point sound in a particular direction.\u003c\/p\u003e\n\u003cp\u003eIf you plan to use the bone conduction transducer for prolonged direct contact with skin, we recommend that cover the transducer and wire connections with something like \u003ca href=\"http:\/\/shop.pimoroni.com\/products\/sugru\"\u003eSugru\u003c\/a\u003e to prevent accidental shorting of driver current through the skin, due to sweat and electrolyte accumulation around the metal parts.\u003c\/p\u003e\n\u003cp\u003eThis transducer is lightweight and small and has 8 ohm impedence and should be run at about 1W. It pairs great with any of our audio amps such as the \u003ca href=\"http:\/\/shop.pimoroni.com\/products\/adafruit-stereo-2-8w-class-d-audio-amplifier-ts2012\"\u003eTS2012\u003c\/a\u003e breakout or \u003ca href=\"http:\/\/shop.pimoroni.com\/products\/adafruit-stereo-3-7w-class-d-audio-amplifier\"\u003eMAX98306\u003c\/a\u003e. Just connect it as you would any other speaker, we even have some wires pre-soldered on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTECHNICAL DETAILS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 14mm x 21.5mm \/ 0.6\" x .8\"\u003c\/li\u003e\n\u003cli\u003eWeight: 9.6g\u003c\/li\u003e\n\u003cli\u003ePower handling: 1 watt RMS\/2 watt max\u003c\/li\u003e\n\u003cli\u003eLe: 1.26 mH\u003c\/li\u003e\n\u003cli\u003eImpedance: 8 ohm\u003c\/li\u003e\n\u003cli\u003eRe: 5.8 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 300-19,000 Hz (but will vary with what you use as the transducer surface)\u003c\/li\u003e\n\u003cli\u003eFs: 1,600 Hz\u003c\/li\u003e\n\u003cli\u003eSPL: 90.1 dB 1W\/1m (but will vary with what you use as the transducer surface)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":1304305856,"sku":"ADA1674","price":7.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/1674_bbced401-53b4-46b3-8b2a-2e0f91a4ec32.jpeg?v=1571270030"},{"product_id":"3-speaker-4-3w","title":"3\" Speaker 4Ω (5W)","description":"\u003cp\u003eWhoop whoop! This is a lovely little speaker ideal for embedding into all sorts of projects.\u003c\/p\u003e\n\u003cp\u003eProviding a solid 5W of power at 4Ω it's perfect for internet radio, mini arcade cabinets, irritating warning sounds, and more! We hook it up to the \u003ca href=\"\/en-eu\/products\/adafruit-stereo-2-8w-class-d-audio-amplifier-ts2012\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAdafruit Stereo 2.8W Class D Audio Amplifier\u003c\/a\u003e for some dope beats in the workshop.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 77.8mm x 77.8mm (25.5mm deep)\u003c\/li\u003e\n\u003cli\u003eMounting points: 60mm apart\u003c\/li\u003e\n\u003cli\u003eWeight: 55g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Generic","offers":[{"title":"Default Title","offer_id":1304309704,"sku":"COM1600","price":2.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Speaker_1_of_3.JPG?v=1576145553"},{"product_id":"adafruit-smt-breakout-pcb-set-for-sot-23-sot-89-sot-223-and-to252","title":"Adafruit SMT Breakout PCB Set For SOT-23, SOT-89, SOT-223 and TO252","description":"\u003cp\u003e\u003cspan\u003eBeguiled by a fancy new chip, regulator or transistor that is only available in a SOT23-3, SOT23-5, SOT23-6, SOT-223, SOT-89, or TO-252 pinout? This set of breakout PCBs will make your life much much easier and get you prototyping faster than ever. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.2;\"\u003e\u003c\/span\u003e3 different boards which fit 5 different packages\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.2;\"\u003efive SOT-23 (fits 2 x SOT-23 on the back, and a single SOT-23-5 or SOT-23-6 on the front)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.2;\"\u003efour SOT-89 or SOT-223\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.2;\"\u003efour TO-252\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.2;\"\u003eEach board has 0.1\" spaced holes.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan style=\"line-height: 1.2;\"\u003eSolder your chip to either side and you're ready to rock on any solderless breadboard.\u003c\/span\u003e\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003cspan\u003eEach item comes with 13 standard thickness PCBs.\u003c\/span\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":1304310212,"sku":"ADA1230","price":4.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/1230-03.jpg?v=1576144570"},{"product_id":"male-dc-power-adapter-2-1mm-plug-to-screw-terminal-block","title":"2.1mm Plug\/Jack to Screw Terminal Block","description":"\u003cp\u003e \u003cspan\u003eIf you need to connect a battery pack or wired power supply to a board that has a DC jack - this adapter will come in very handy!\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2.1mm DC plug on one end\u003c\/li\u003e\n\u003cli\u003eScrew terminal block on the other. \u003c\/li\u003e\n\u003cli\u003eThe terminals are labeled with positive\/negative assuming a positive-tip configuration (which is the most common)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Male","offer_id":1319641556,"sku":"ADP010","price":2.25,"currency_code":"GBP","in_stock":false},{"title":"Female","offer_id":1319641560,"sku":"ADP011","price":2.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/male21terminal_lrg.jpeg?v=1571270038"},{"product_id":"brass-m2-5-standoffs-for-pi-hats-black-plated-pack-of-2","title":"M2.5 Standoffs for Pi HATs - Black Plated - Pack of 2","description":"\u003cp\u003eOur standoffs are engineered specifically to keep your \u003ca href=\"\/en-eu\/collections\/hats\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePi HAT or pHAT\u003c\/a\u003e snug and supported on your Pi while also keeping the two boards separated. They're the perfect companion for any Pi HAT\/pHAT combo.\u003c\/p\u003e\n\u003cp\u003eContents\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 x 10mm M2.5 F-F standoff\u003c\/li\u003e\n\u003cli\u003e4 x 6mm screw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"\/en-eu\/collections\/raspberry-pi\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaspberry Pi\u003c\/a\u003e and \u003ca href=\"\/en-eu\/collections\/hats\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePi HATs\u003c\/a\u003e are not included!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Generic","offers":[{"title":"Default Title","offer_id":3403850628,"sku":"COM2100","price":1.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Standoffs_2_of_2.JPG?v=1576144625"},{"product_id":"colourful-arcade-buttons","title":"Colourful Arcade Buttons","description":"\u003cp\u003eClassic arcade buttons in a variety of colours.\u003c\/p\u003e\n\u003cp\u003eEver feel the need to relive the glory days of button mashing in your local arcade?\u003c\/p\u003e\n\u003cp\u003eOr possibly you just need to add a button to your project and want something a little more colourful and satisfying.\u003c\/p\u003e\n\u003cp\u003eThese lovely little arcade buttons not only add colour to your project, they also have a 2mm travel when pressed, giving a really satisfying feel. We like them so much we used them for the Picade!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/66771da0f51df392d8671ddf06b95efd.pdf?11673046966894615591\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eClick here for button dimensions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Generic","offers":[{"title":"Blue","offer_id":3445069828,"sku":"COM0404","price":1.25,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":3445069892,"sku":"COM0405","price":1.25,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":3445069956,"sku":"COM0406","price":1.25,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":3445070020,"sku":"COM0407","price":1.25,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":3445070084,"sku":"COM0408","price":1.25,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":12086226649158,"sku":"COM0421","price":1.25,"currency_code":"GBP","in_stock":false},{"title":"Pink","offer_id":12086227075142,"sku":"COM0422","price":1.25,"currency_code":"GBP","in_stock":true},{"title":"Clear","offer_id":12086227107910,"sku":"COM0423","price":1.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Low_Profile_Arcade_Buttons_1_of_9.JPG?v=1576145348"},{"product_id":"force-sensing-resistor-0-5-circle","title":"Force-Sensing Resistor: 0.6″-Diameter Circle","description":"\u003cp\u003eThis force-sensing resistor (FSR) from Interlink Electronics is a passive component that exhibits a decrease in resistance when there is an increase in the force applied to the 0.58″-diameter (1.5 cm) active area, allowing you to create a sensor that is able to detect force or pressure. With a force sensitivity range of a few grams to a few kilograms, this sensor is optimized for use in human touch control applications\u003c\/p\u003e\n\u003cp\u003eThis force-sensing resistor (FSR) from Interlink Electronics is a passive component that acts as a variable resistor, with resistance decreasing in response to increasing applied force, which makes it easy to add a touch interface to your project or create a robot with much more sophisticated tactile senses than are possible with simple\u003cspan\u003e \u003c\/span\u003elever switches. The polymer thick film (PTF) device is optimized for use in human touch control of electronic devices and can sense an applied force anywhere in the active area ranging from a few dozen grams to a few kilograms (0.2 N to 20 N).\u003c\/p\u003e\n\u003cp\u003eIn tests, the resistance exceeded 1 MΩ with no applied pressure and ranged from around 100 kΩ to a few hundred Ohms as finger pressure varied from light (a few dozen grams) to heavy (pressing as hard as possible). The resistance is very stable when the pressure is fixed, and the readings are very repeatable (there are no problems with hysteresis). This resistance range is well suited to work directly with the internal pull-ups of many microcontrollers such as AVRs and PICs. The FSR was responsive enough and sensitive enough to distinctly pick up light, rapid finger taps, and it was even able to pick up the vibrations of a small vibration motor placed on it on the motor’s side.\u003c\/p\u003e\n\u003cp\u003eThe 0.72″-diameter circular pad is flexible, light (0.25 g), and extremely thin (0.02″), and it has a circular active sensing area with a diameter of 0.58″. It does not appreciably compress when pressure is applied. The FSR has a masked adhesive backing for easy mounting, and the 1.7″ flexible male leads give you a convenient way to integrate the part into your project. The two male pins (called “solder tabs”) have a 0.1″ spacing, which means they are compatible with most \u003ca href=\"\/en-eu\/search?type=product\u0026amp;q=breadboard\" target=\"_blank\" rel=\"noopener noreferrer\"\u003esolderless breadboards\u003c\/a\u003e and perfboards, though the solder tabs are too short to work well with many\u003cspan\u003e \u003c\/span\u003e0.1″ connectors.\u003c\/p\u003e\n\u003cp\u003eNote that this FSR is not a load cell or strain gauge, and it is not suitable for precision force measurements. While it can be used for high-resolution dynamic measurement, only qualitative results are generally attainable. Force accuracy ranges from 5% to 25% depending on a number of factors, and the resolution is better than 0.5% of the full range. Please see the resources tab for more information, including force-vs-resistance curves, integration notes, usage tips, and suggested electrical circuits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExample applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePressure-sensitive touch user interface\u003c\/li\u003e\n\u003cli\u003eTactile sensor for robotic appendages\u003c\/li\u003e\n\u003cli\u003eFinger pads for special gloves\u003c\/li\u003e\n\u003cli\u003eTarget contact detection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/FSR400-Series-Integration-Guide-13.pdf?11520758216427259921\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFSR 400 series integration guide\u003c\/a\u003e (1MB pdf) - Detailed information about Interlink Electronic’s FSR 400 series of force-sensing resistors, including theory of operation, performance data, circuit diagrams, and usage tips.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/FSR400Series-PD-13.pdf?11520758216427259921\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFSR 400 series data sheet\u003c\/a\u003e (2MB pdf)\u003c\/p\u003e","brand":"Pololu","offers":[{"title":"Default Title","offer_id":3445156356,"sku":"POL-1696","price":7.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/1696.jpeg?v=1571270040"},{"product_id":"pololu-wheel-42x19mm-pair","title":"Pololu Wheel 42x19mm Pair","description":"\u003cp\u003eThis custom-designed white plastic wheel is designed to fit the output shafts on our \u003ca href=\"http:\/\/shop.pimoroni.com\/products\/micro-metal-gearmotor-mp\"\u003emicro metal gearmotors\u003c\/a\u003e.\u003c\/p\u003e\n\u003cul style=\"line-height: 1.2;\"\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.2;\"\u003e\u003cspan style=\"line-height: 1.2;\"\u003e\u003cspan\u003eRubber tire measuring 1.65\" (42 mm) in diameter\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.2;\"\u003eTeeth on the hub optionally allow a reflectance sensor to be used for encoder feedback.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.2;\"\u003eThese wheels are sold in \u003c\/span\u003e\u003cstrong style=\"line-height: 1.2;\"\u003epairs\u003c\/strong\u003e\u003cspan style=\"line-height: 1.2;\"\u003e.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan style=\"line-height: 16px;\"\u003e\u003cspan\u003eGearmotors should be mounted onto the side of the hub with the protruding teeth, as shown in the images. The output shaft will slide into the socket easily at first but will achieve a snug fit when pressed through to the other edge of the hub\u003c\/span\u003e\u003c\/span\u003e","brand":"Pololu","offers":[{"title":"42x19mm","offer_id":3445156548,"sku":"POL-1090","price":7.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/1090_SINGLE_9d123dbf-5c31-4247-a6c2-92f2eed50a5c.jpeg?v=1571270040"},{"product_id":"pololu-wheel-90x10mm-pair","title":"Pololu Wheel 90x10mm Pair","description":"\u003cp\u003eThese plastic wheels have silicone tires, measure 90 mm (3.54″) in diameter, and they press-fit onto the 3mm D shafts on our \u003ca href=\"\/en-eu\/products\/micro-metal-gearmotor-extended-back-shaft\" target=\"_blank\"\u003emicro metal gearmotors.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eAdditionally, this wheel is compatible with several of our \u003ca href=\"\/en-eu\/products\/pololu-universal-aluminum-mounting-hub-for-5mm-shaft-m3-holes-2-pack\" target=\"_blank\"\u003euniversal mounting hubs\u003c\/a\u003e, which can serve as adapters for motors with different shafts. This product is a pair of wheels.\u003c\/p\u003e\n\u003cp\u003eThese wheels are great for robotics, custom RC vehicles, or any other project you need to get rolling. They measure 90 mm (3.54″) in diameter and are designed to press-fit securely onto D output shafts with a diameter of 3 mm.\u003c\/p\u003e\n\u003cp\u003eSix mounting holes for #4 or M3 screws make it possible to use the wheel with any of our universal mounting hubs for those screw sizes, enabling these wheels to be used with our larger metal gearmotors and stepper motors.\u003c\/p\u003e\n\u003cp\u003eThe slots in the six spokes fit #2 or M2 screws and allow additional accessories to be mounted to the wheel such as decorations or parts of an encoder system. The included silicone tires feature horizontal treads for improved traction.\u003c\/p\u003e\n\u003ch2\u003eUseful resources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/pololu-wheel-dimensions.pdf?v=1621955567\" target=\"_blank\"\u003eDimensional diagram for Pololu wheels\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/pololu-wheel-90x10mm.zip?v=1621955657\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e3D model\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pololu","offers":[{"title":"Black","offer_id":3445156996,"sku":"POL-1435","price":6.25,"currency_code":"GBP","in_stock":false},{"title":"Red","offer_id":42023140982981,"sku":"POL-1436","price":6.25,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":42023141015749,"sku":"POL-1438","price":6.25,"currency_code":"GBP","in_stock":false},{"title":"White","offer_id":42023141048517,"sku":"POL-1439","price":6.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/1435_motor.jpg?v=1675256734"},{"product_id":"pololu-wheel-32x7mm-pair","title":"Pololu Wheel 32x7mm Pair","description":"\u003cspan style=\"line-height: 1.2;\"\u003eThis custom designed plastic wheel is designed to fit the output shafts on our \u003ca href=\"http:\/\/shop.pimoroni.com\/products\/micro-metal-gearmotor-mp\"\u003emicro metal gearmotors.\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003cul style=\"line-height: 1.2;\"\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.2;\"\u003e\u003cspan style=\"line-height: 1.2;\"\u003e\u003cspan\u003e\u003cspan\u003eSilicone tires measuring \u003cstrong\u003e32\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e mm (1.26\")\u003c\/strong\u003e\u003cspan\u003e in diameter\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.2;\"\u003eThese wheels are sold in \u003c\/span\u003e\u003cstrong style=\"line-height: 1.2;\"\u003epairs\u003c\/strong\u003e\u003cspan style=\"line-height: 1.2;\"\u003e.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.2;\"\u003eAvailable in a two colours\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pololu","offers":[{"title":"Black","offer_id":3445157700,"sku":"POL-1087","price":3.25,"currency_code":"GBP","in_stock":false},{"title":"White","offer_id":3445157764,"sku":"POL-1088","price":3.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/1087_colour.jpeg?v=1571270040"},{"product_id":"pololu-ball-caster-with-3-4-metal-ball","title":"Pololu Ball Caster","description":"\u003cp\u003eThis ball caster kit includes a black ABS housing, a metal ball (chose the correct size above), two spacers (1\/16\" and 1\/8\" thick), and two #2 screw sets.\u003c\/p\u003e\n\u003cp\u003eThe total height of the ball caster, 0.83\", 0.53\", or 0.4\", can be increased to about 1\", 0.7\", or 0.6\" respectively using the included spacers. The two included #2 screws can be used to mount the ball caster to your chassis\u003c\/p\u003e\n\u003cp\u003eNote that our ball casters are designed for small robots; they are not intended to bear more than a few pounds. With more weight than this, friction between the ball and the housing will probably keep it from rolling well.\u003c\/p\u003e\n\u003ch2\u003eDimensional Drawing\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/pololu-ball-caster-with-0-750in-metal-ball.pdf?v=1621950785\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e3\/4 inch\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/pololu-ball-caster-with-0-500in-ball.pdf?v=1621950785\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e1\/2 inch\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/pololu-ball-caster-with-0-375in-ball.pdf?v=1621950785\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e3\/8 inch\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pololu","offers":[{"title":"3\/4 inch","offer_id":3445158340,"sku":"POL-955","price":3.0,"currency_code":"GBP","in_stock":false},{"title":"1\/2 inch","offer_id":3445158404,"sku":"POL-953","price":2.0,"currency_code":"GBP","in_stock":false},{"title":"3\/8 inch","offer_id":42014883872965,"sku":"POL-951","price":2.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/953_ce5a6b9e-e690-458c-9de5-d5bc1fe4a067.jpeg?v=1571270040"},{"product_id":"pololu-micro-metal-gearmotor-bracket-pair-black","title":"Micro Metal Gearmotor Bracket Pair","description":"\u003cp\u003e\u003cspan\u003eThis compact bracket enables convenient mounting of popular, \u003c\/span\u003e\u003ca href=\"http:\/\/shop.pimoroni.com\/products\/micro-metal-gearmotor-mp\"\u003eSanyo-style miniature metal gearmotors\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cspan\u003eplastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe brackets are sold in \u003c\/span\u003e\u003cstrong\u003epairs\u003c\/strong\u003e\u003cspan\u003e, and each bracket comes with two \u003c\/span\u003e#2 screws\u003cspan\u003e and two \u003c\/span\u003enuts\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"Pololu","offers":[{"title":"White","offer_id":3445159300,"sku":"POL-1089","price":3.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/1089_in_place.jpeg?v=1619705149"},{"product_id":"ds-929mg-digital-servo","title":"DS-929MG Digital Servo","description":"\u003cp\u003eA great servo at a good price point. With metal gearing and high resolution\/accuracy it's a perfect high quality all-rounder.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMetal gearing\u003c\/li\u003e\n\u003cli\u003eFull adaptor set and dampened mount points\u003c\/li\u003e\n\u003cli\u003eHigh resolution with tight dead band\u003c\/li\u003e\n\u003cli\u003eAccurate positioning and fast control response\u003c\/li\u003e\n\u003cli\u003eQuick acceleration\u003c\/li\u003e\n\u003cli\u003eConstant torque throughout travel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe spent a lot of time looking for a good servo to stock and this is it.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eControl system: Pulse width control 1500us neutral\u003c\/li\u003e\n\u003cli\u003eOperating voltage range: 4.8V~6.0V\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: -20℃ to +60℃\u003c\/li\u003e\n\u003cli\u003eOperating speed: 0.12s\/60°\u003c\/li\u003e\n\u003cli\u003eStall torque: 2.5kg.cm\u003c\/li\u003e\n\u003cli\u003eStanding torque: 2.5kg.cm hold out\u003c\/li\u003e\n\u003cli\u003eIdle current: 10mA at stopped\u003c\/li\u003e\n\u003cli\u003eRunning current: 200mA\/60° no load\u003c\/li\u003e\n\u003cli\u003eStall current: 960mA\u003c\/li\u003e\n\u003cli\u003eDead band width: ≤3usec\u003c\/li\u003e\n\u003cli\u003eMotor type : Cored metal brush\u003c\/li\u003e\n\u003cli\u003ePotentiometer type : 2 Slider\/direct drive\u003c\/li\u003e\n\u003cli\u003eAmplifier type : High efficiency MCU+MOSFET\u003c\/li\u003e\n\u003cli\u003eDimensions : 22.5x11.5x24.6mm\u003c\/li\u003e\n\u003cli\u003eWeight: 9g\u003c\/li\u003e\n\u003cli\u003eGear material: Metal\u003c\/li\u003e\n\u003cli\u003eConnector wire length: 215mm\u003c\/li\u003e\n\u003cli\u003eConnector wire gauge: 28AWG\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Corona","offers":[{"title":"Default Title","offer_id":3445217476,"sku":"COR-DS929-MG","price":8.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/DS-929MG.jpeg?v=1571270041"},{"product_id":"micro-metal-gearmotor-extended-back-shaft","title":"Micro metal gearmotor (extended back shaft)","description":"\u003cp\u003eThis gearmotor is a miniature brushed DC motor with a metal gearbox available in a range of gearing ratios depending on use.\u003c\/p\u003e\n\u003ctable class=\"table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eRatio\u003c\/th\u003e\n\u003cth\u003eSpeed @ 6V\u003c\/th\u003e\n\u003cth\u003eFree-run current @ 6V\u003c\/th\u003e\n\u003cth\u003eStall torque @ 6V (minimum)\u003c\/th\u003e\n\u003cth\u003eStall current @ 6V\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e11:1\u003c\/td\u003e\n\u003ctd\u003e1800±10% rpm\u003c\/td\u003e\n\u003ctd\u003e80mA (160mA max)\u003c\/td\u003e\n\u003ctd\u003e0.12kg. cm\u003c\/td\u003e\n\u003ctd\u003e650mA\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/12FN20-11-061950.pdf?v=1625057292\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20:1\u003c\/td\u003e\n\u003ctd\u003e1050±10% rpm\u003c\/td\u003e\n\u003ctd\u003e90mA (180mA max)\u003c\/td\u003e\n\u003ctd\u003e0.26kg. cm\u003c\/td\u003e\n\u003ctd\u003e850mA\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/12N20-20-061050.pdf?v=1625057292\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50:1\u003c\/td\u003e\n\u003ctd\u003e420±10% rpm\u003c\/td\u003e\n\u003ctd\u003e90mA max\u003c\/td\u003e\n\u003ctd\u003e0.4kg. cm\u003c\/td\u003e\n\u003ctd\u003e920mA\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/XG-2014032803_JL-12FN20-50-06420.pdf?v=1604917983\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e110:1\u003c\/td\u003e\n\u003ctd\u003e190±10% rpm\u003c\/td\u003e\n\u003ctd\u003e39mA (78mA max)\u003c\/td\u003e\n\u003ctd\u003e0.9kg. cm\u003c\/td\u003e\n\u003ctd\u003e600mA\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/12FN20-110-06190.pdf?v=1628519639\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e298:1\u003c\/td\u003e\n\u003ctd\u003e75±10% rpm\u003c\/td\u003e\n\u003ctd\u003e100mA max\u003c\/td\u003e\n\u003ctd\u003e2.1kg. cm\u003c\/td\u003e\n\u003ctd\u003e920mA\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/XG-2014032805_JL-12FN20-298-0675.pdf?v=1604917983\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1006:1\u003c\/td\u003e\n\u003ctd\u003e14.2±10% rpm\u003c\/td\u003e\n\u003ctd\u003e56mA max\u003c\/td\u003e\n\u003ctd\u003e2.9kg. cm\u003c\/td\u003e\n\u003ctd\u003e380mA\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/X19-7_JL-12FN20-1006-0614.pdf?v=1604917983\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\n\u003cli\u003eAll of the micro metal gearmotors, except the 1006:1 variant, have the same physical dimensions, so one version can be easily swapped for another if your design requirements change.\u003c\/li\u003e\n\u003cli\u003eLong (12mm), 3 mm-diameter D-shaped metal output shaft.\u003c\/li\u003e\n\u003cli\u003e4.5mm long, 1mm diameter back shaft, great for \u003ca href=\"http:\/\/shop.pimoroni.com\/products\/optical-encoder-pair-kit-for-micro-metal-gearmotors-3-3v\" target=\"_blank\"\u003eoptical encoders!\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Generic","offers":[{"title":"11:1","offer_id":28740678024,"sku":"COM0809","price":4.25,"currency_code":"GBP","in_stock":true},{"title":"20:1","offer_id":28740694600,"sku":"COM0808","price":4.25,"currency_code":"GBP","in_stock":true},{"title":"50:1","offer_id":3445220356,"sku":"COM0800","price":4.25,"currency_code":"GBP","in_stock":true},{"title":"110:1","offer_id":41480007680197,"sku":"COM0818","price":4.25,"currency_code":"GBP","in_stock":true},{"title":"298:1","offer_id":3445220420,"sku":"COM0801","price":4.25,"currency_code":"GBP","in_stock":true},{"title":"1006:1","offer_id":3445220484,"sku":"COM0802","price":4.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Gearmotor_2_of_2.jpeg?v=1571270041"},{"product_id":"raspberry-pi-b-gpio-shrouded-header-2x20","title":"Raspberry Pi B+ - GPIO Shrouded Header (2x20)","description":"\u003cp\u003eConnect your project to your B+ Raspberry Pi's GPIO pins using this handy header\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis 2x20 shrouded header has the same number and spacing of pins as the Raspberry Pi B+ so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1\"-spaced pins and is keyed for polarity.\u003c\/span\u003e\u003c\/p\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":3445341188,"sku":"PRT-13054","price":1.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/13054-01a.jpeg?v=1571270043"},{"product_id":"passive-gps-antenna-ufl-9mm-x-9mm-2dbi-gain","title":"Passive GPS Antenna uFL - 9mm x 9mm -2dBi gain","description":"\u003cp\u003eWow that's a tiny GPS antenna! This passive antenna is only 9mm x 9mm x 6.5mm in size, with a 50mm long uFL cable. Great for when you want to keep things small.\u003c\/p\u003e\n\u003cp\u003eComes with a standard uFL connector on the end. \u003ca href=\"\/en-eu\/products\/adafruit-fona-808-mini-cellular-gsm-gps-breakout\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePerfect for the FONA 808\u003c\/a\u003e! Not good for the Ultimate GPS breakouts\/shields\/hat \u003ca href=\"\/en-eu\/products\/adafruit-gps-antenna-external-active-antenna-3-5v-28db-5-meter-sma\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eas those are designed for active antennas.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is the 9mm version\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL DETAILS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInterface: IPX uFL\u003c\/li\u003e\n\u003cli\u003eGain: approx -2 dBi\u003c\/li\u003e\n\u003cli\u003eWire Length: 50mm \/ 2\"\u003c\/li\u003e\n\u003cli\u003eWeight: 2.4g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":3514771844,"sku":"ADA2460","price":4.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/2460-03.jpg?v=1576596300"},{"product_id":"colourful-mini-breadboard","title":"Colourful mini breadboard","description":"\u003cp\u003eSolderless breadboard is an essential protoyping tool, allowing you to add push-through components directly onto the board without the need for any soldering.\u003c\/p\u003e\n\u003cp\u003eThis breaboard has 170 tie points. The central board is split in half with 17 lines of five points on each half.\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/170pt-bb-cutaway_large.png?6097478575394127212\" width=\"299\" height=\"227\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe board is modular, so if your project expands to the point where one board isn't enough you can simply add another!\u003c\/p\u003e\n\u003cp\u003eComes in a variety of colours, great for livening up your project!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUpdate: all of our mini breadboard come with interlocking tabs except for the cyan coloured boards, which have smooth sides\u003c\/strong\u003e\u003c\/p\u003e","brand":"Generic","offers":[{"title":"Blue","offer_id":6430578500,"sku":"COM0101","price":1.75,"currency_code":"GBP","in_stock":false},{"title":"Green","offer_id":6430578692,"sku":"COM0103","price":1.75,"currency_code":"GBP","in_stock":false},{"title":"Yellow","offer_id":6430578756,"sku":"COM0104","price":1.75,"currency_code":"GBP","in_stock":false},{"title":"Red","offer_id":6430578948,"sku":"COM0106","price":1.75,"currency_code":"GBP","in_stock":false},{"title":"White","offer_id":6430579012,"sku":"COM0107","price":1.75,"currency_code":"GBP","in_stock":false},{"title":"Black","offer_id":6430579076,"sku":"COM0108","price":1.75,"currency_code":"GBP","in_stock":false},{"title":"Cyan","offer_id":6430578628,"sku":"COM0102","price":1.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Breadboard_hexagon.jpeg?v=1571270053"},{"product_id":"led-5mm-pack-of-10","title":"LED - 5mm - pack of 10","description":"\u003cp\u003eLEDs are a great addition to any project. Whether you need a power indicator, a set of status lights, or a whole array for something more decorative these little through hole LEDs are always useful.\u003c\/p\u003e\n\u003cp\u003eSold in a variety of colours these 5mm LEDs come in \u003cstrong\u003epacks of 10\u003c\/strong\u003e and are great both for prototyping on \u003ca href=\"\/en-eu\/products\/colourful-mini-breadboard\"\u003ebreadboard\u003c\/a\u003e and for use in finished projects. If you'd prefer a selection box of different LEDs plus some handy resistors, check out our \u003ca href=\"\/en-eu\/products\/maker-essentials-leds-resistors\"\u003eMaker Essentials kit\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003eDatasheets - \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/5mm_red.pdf?v=1675692900\" target=\"_blank\"\u003eRed\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/5mm_orange.pdf?v=1675692900\" target=\"_blank\"\u003eOrange\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/5mm_yellow.pdf?v=1675692899\" target=\"_blank\"\u003eYellow\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/10MM_green.pdf?v=1675852200\" target=\"_blank\"\u003eGreen\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/5mm_blue.pdf?v=1675342158\" target=\"_blank\"\u003eBlue\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/5mm_diffused_white.pdf?v=1675342158\" target=\"_blank\"\u003eWhite\u003c\/a\u003e\u003c\/p\u003e","brand":"Generic","offers":[{"title":"Red","offer_id":6430770244,"sku":"COM0601","price":1.0,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":6430770308,"sku":"COM0602","price":1.0,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":6430770436,"sku":"COM0603","price":1.0,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":6430770692,"sku":"COM0605","price":1.0,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":41661687759045,"sku":"COM0627","price":1.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/5mm_LED_1_of_6_abbe8e14-b385-4af0-a09f-83ffbf741d7e.jpeg?v=1571270054"},{"product_id":"led-10mm-pack-of-5","title":"LED - 10mm - pack of 5","description":"\u003cp\u003eLEDs are a great addition to any project. Whether you need a power indicator, a set of status lights, or a whole array for something more decorative these little through hole LEDs are always useful.\u003c\/p\u003e\n\u003cp\u003eSold in a variety of colours these 10mm LEDs come in \u003cstrong\u003epacks of 5\u003c\/strong\u003e and are great both for prototyping on \u003ca href=\"\/en-eu\/products\/colourful-mini-breadboard\" target=\"_blank\"\u003ebreadboard\u003c\/a\u003e\u003cspan\u003e and for use in finished projects. If you'd prefer a selection box of different LEDs plus some handy resistors, check out our \u003ca href=\"https:\/\/pimoroni-2.myshopify.com\/products\/maker-essentials-leds-resistors\" target=\"_blank\"\u003eMaker Essentials kit\u003c\/a\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDatasheet - \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/10MM_red.pdf?v=1675692899\" target=\"_blank\"\u003ered\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/10MM_yellow.pdf?v=1675692900\" target=\"_blank\"\u003eyellow\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/10MM_green.pdf?v=1675852200\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egreen\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/10MM_blue.pdf?v=1675692900\" target=\"_blank\"\u003eblue\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/10MM_diffused_white.pdf?v=1675692900\" target=\"_blank\"\u003ewhite\u003c\/a\u003e\u003c\/p\u003e","brand":"Generic","offers":[{"title":"Red","offer_id":6430786052,"sku":"COM0607","price":1.0,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":6430786180,"sku":"COM0608","price":1.0,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":6430786500,"sku":"COM0609","price":1.0,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":6430786564,"sku":"COM0610","price":1.0,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":6430786628,"sku":"COM0611","price":1.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/10mm_LED_4_of_6_2fff052d-9864-4636-bc36-bab28759125b.jpeg?v=1571270054"},{"product_id":"copper-tape","title":"Copper Tape","description":"\u003cp\u003eCopper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder, like the stained glass on Tiffany lamps.\u003c\/p\u003e\n\u003cp\u003eThis copper tape is adhesive-backed, 5mm wide and comes in 20m rolls\u003c\/p\u003e","brand":"Generic","offers":[{"title":"Default Title","offer_id":11024311812,"sku":"COM-B008","price":2.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Copper_tape.jpeg?v=1571270054"},{"product_id":"feather-stacking-headers-12-pin-and-16-pin-female-headers","title":"Feather Stacking Headers - 12-pin and 16-pin female headers","description":"\u003cp\u003eThese two \u003cstrong\u003eFemale Stacking Headers\u003c\/strong\u003e alone are, well, lonely. But pair them with any of the \u003ca href=\"https:\/\/shop.pimoroni.com\/search?type=product\u0026amp;q=feather\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFeather\u003c\/a\u003e boards and you're in business!\u003c\/p\u003e\n\u003cp\u003eWhat do they do? They stack. Put the headers through your Feather and then you can not only plug them into a solderless breadboard, but you could attach circuitry on top as well\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Comes with one 12-pin and one 16-pin header, \u003ca href=\"https:\/\/shop.pimoroni.com\/search?type=product\u0026amp;q=feather\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFeathers\u003c\/a\u003e not included\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":14086323588,"sku":"ADA2830","price":1.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/2830.jpeg?v=1571270057"},{"product_id":"mifare-classic-13-56mhz-rfid-nfc-white-tag-1kb","title":"13.56MHz RFID\/NFC White Tag - Classic 1K","description":"\u003cp\u003eThis is a blank 13.56MHz RFID\/NFC laundry tag - often used for laundry but also general tagging. The tag contains a small RFID chip and an antenna, and is passively powered by the reader\/writer when placed a couple inches away.\u003c\/p\u003e\n\u003cp\u003eThese can be read by almost any 13.56MHz RFID\/NFC reader but make sure it can handle ISO\/IEC 14443 Type A cards as there are a few other encoding standards (like FeLica) They are tested and work great with both the \u003ca href=\"\/en-eu\/products\/pn532-nfc-rfid-controller-breakout-board-v1-6\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePN532 NFC\/RFID breakout board\u003c\/a\u003e and \u003ca href=\"\/en-eu\/products\/adafruit-pn532-nfc-rfid-controller-shield-for-arduino-extras\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAdafruit NFC\/RFID Shield for Arduino\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003eThese chips can be written to \u0026amp; store up to 1 KB of data in writable EEPROM divided into banks, and can handle over 100,000 re-writes. You can use the \u003ca href=\"\/en-eu\/products\/pn532-nfc-rfid-controller-breakout-board-v1-6\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePN532 NFC\/RFID breakout board\u003c\/a\u003e or \u003ca href=\"\/en-eu\/products\/adafruit-pn532-nfc-rfid-controller-shield-for-arduino-extras\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAdafruit NFC\/RFID Shield for Arduino\u003c\/a\u003e to read and write data to the EEPROM inside the tag. There is also a permanent 4-byte ID burned into the chip that you can use to identify one tag from another - the ID number cannot be changed.\u003c\/p\u003e\n\u003cp\u003eThese use a ISO\/IEC 14443 Type A chipset, which used to be the 'classic' NFC chipset. In ~2014, the NFC forum decided not to support this chipset anymore, so newer phones do not support it. This only matters if you're trying to use this tag with a phone\/tablet.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL DETAILS\u003c\/h2\u003e\n\u003cp\u003eRFID chip specification:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 KiloByte (8 KiloBit) non-volatile EEPROM storage\u003c\/li\u003e\n\u003cli\u003eBuilt in encryption engine with 48-bit key\u003c\/li\u003e\n\u003cli\u003e4 Byte unique identifier burned into the chip\u003c\/li\u003e\n\u003cli\u003e13.56 MHz frequency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTag specification:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e25.4mm diameter x 1mm \/ 1\" diameter x 0.03\"\u003c\/li\u003e\n\u003cli\u003e0.9 grams \/ 0.03 oz\u003c\/li\u003e\n\u003cli\u003eWorks about 2\" away from reader\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":14088061956,"sku":"ADA360","price":2.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/360-00.jpg?v=1576595381"},{"product_id":"mifare-classic-13-56mhz-rfid-nfc-sticker-1kb","title":"MiFare Classic (13.56MHz RFID\/NFC) Sticker - 1KB","description":"\u003cp\u003eThis is a blank 13.56MHz RFID\/NFC sticker - often used for inventory uses but also wherever a sticker is desired. The tag contains a small RFID chip and an antenna, and is passively powered by the reader\/writer when placed a couple inches away.\u003c\/p\u003e\n\u003cp\u003eThese can be read by almost any 13.56MHz RFID\/NFC reader but make sure it can handle ISO\/IEC 14443 Type A cards as there are a few other encoding standards (like FeLica) They are tested and work great with both our \u003ca href=\"\/en-eu\/products\/pn532-nfc-rfid-controller-breakout-board-v1-6\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePN532 NFC\/RFID breakout board\u003c\/a\u003e and \u003ca href=\"\/en-eu\/products\/adafruit-pn532-nfc-rfid-controller-shield-for-arduino-extras\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAdafruit NFC\/RFID Shield for Arduino\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003eThese chips can be written to \u0026amp; store up to 1 KB of data in writable EEPROM divided into banks, and can handle over 100,000 re-writes. You can use our \u003ca href=\"\/en-eu\/products\/pn532-nfc-rfid-controller-breakout-board-v1-6\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePN532 NFC\/RFID breakout board\u003c\/a\u003e or \u003ca href=\"\/en-eu\/products\/adafruit-pn532-nfc-rfid-controller-shield-for-arduino-extras\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAdafruit NFC\/RFID Shield for Arduino\u003c\/a\u003e to read and write data to the EEPROM inside the tag. There is also a permanent 4-byte ID burned into the chip that you can use to identify one tag from another - the ID number cannot be changed.\u003c\/p\u003e\n\u003cp\u003eThese use a ISO\/IEC 14443 Type A chipset, which used to be the 'classic' NFC chipset. In ~2014, the NFC forum decided not to support this chipset anymore, so newer phones do not support it. This only matters if you're trying to use this tag with a phone\/tablet.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL DETAILS\u003c\/h2\u003e\n\u003cp\u003eRFID chip specification:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 KiloByte (8 KiloBit) non-volatile EEPROM storage\u003c\/li\u003e\n\u003cli\u003eBuilt in encryption engine with 48-bit key\u003c\/li\u003e\n\u003cli\u003e4 Byte unique identifier burned into the chip\u003c\/li\u003e\n\u003cli\u003e13.56 MHz frequency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTag specification:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e41mm x 24mm x 0.2mm \/ 1.6\" x 1\" x 0.008\u003c\/li\u003e\n\u003cli\u003e0.3 grams \/ 0.01 oz\u003c\/li\u003e\n\u003cli\u003eWorks about 2.5\" away from reader\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":14088062852,"sku":"ADA362","price":2.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/362-01.jpg?v=1576581402"},{"product_id":"mifare-classic-13-56mhz-rfid-nfc-clear-tag-1kb","title":"13.56MHz RFID\/NFC Clear Tag - Classic 1K","description":"\u003cp\u003eThis is a blank 13.56MHz Classic 'laundry' tag - often used for laundry or identification but also found in other systems where a small proximity card is desired.\u003c\/p\u003e\n\u003cp\u003eThis one is clear!  The tag contains a small RFID chip and an antenna, and is passively powered by the reader\/writer when placed a couple inches away.\u003cbr\u003e\u003cbr\u003eThese can be read by almost any 13.56MHz RFID\/NFC reader but make sure it can handle ISO\/IEC 14443 Type A cards as there are a few other encoding standards (like FeLica) They are tested and work great with both our \u003ca href=\"\/en-eu\/products\/pn532-nfc-rfid-controller-breakout-board-v1-6\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePN532 NFC\/RFID breakout board\u003c\/a\u003e and \u003ca href=\"\/en-eu\/products\/adafruit-pn532-nfc-rfid-controller-shield-for-arduino-extras\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAdafruit NFC\/RFID Shield for Arduino\u003c\/a\u003e!\u003cbr\u003e\u003cbr\u003eThese chips can be written to \u0026amp; store up to 1 KB of data in writable EEPROM divided into banks, and can handle over 100,000 re-writes. You can use our \u003ca href=\"\/en-eu\/products\/pn532-nfc-rfid-controller-breakout-board-v1-6\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePN532 NFC\/RFID breakout board\u003c\/a\u003e or \u003ca href=\"\/en-eu\/product\/adafruit-pn532-nfc-rfid-controller-shield-for-arduino-extras\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAdafruit NFC\/RFID Shield for Arduino\u003c\/a\u003e to read and write data to the EEPROM inside the tag. There is also a permanent 4-byte ID burned into the chip that you can use to identify one tag from another - the ID number cannot be changed.\u003c\/p\u003e\n\u003cp\u003eThese use a ISO\/IEC 14443 Type A chipset, which used to be the 'classic' NFC chipset. In ~2014, the NFC forum decided not to support this chipset anymore, so newer phones do not support it. This only matters if you're trying to use this tag with a phone\/tablet.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL DETAILS\u003c\/h2\u003e\n\u003cp\u003eRFID chip specification:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 KiloByte (8 KiloBit) non-volatile EEPROM storage\u003c\/li\u003e\n\u003cli\u003eBuilt in encryption engine with 48-bit key\u003c\/li\u003e\n\u003cli\u003e4 Byte unique identifier burned into the chip\u003c\/li\u003e\n\u003cli\u003e13.56 MHz frequency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTag specification:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e25.4mm diameter x 1mm \/ 1\" diameter x 0.03\"\u003c\/li\u003e\n\u003cli\u003e0.9 grams \/ 0.03 oz\u003c\/li\u003e\n\u003cli\u003eWorks about 2\" away from reader\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLEARN\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-nfc-rfid-on-raspberry-pi\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAdafruit NFC\/RFID on Raspberry Pi\u003c\/a\u003e - Add RFID\/NFC read and write to your Pi in an hour!\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-pn532-rfid-nfc\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAdafruit PN532 RFID\/NFC Breakout and Shield\u003c\/a\u003e - Radio Frequency ID and Near Field Communication using the PN532\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/collins-lab-rfid\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCollin's Lab: RFID\u003c\/a\u003e - Identifying object via radio waves\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":14088066116,"sku":"ADA361","price":2.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/361-01.jpg?v=1571270058"},{"product_id":"mifare-classic-13-56mhz-rfid-nfc-clear-keychain-fob-1kb","title":"MiFare Classic (13.56MHz RFID\/NFC) Clear Keychain Fob - 1KB","description":"\u003cp\u003eThis is a blank MiFare Classic keychain fob - often used for electronic locks or customer identification but also found in other systems where a small and easy to carry tag is desired.\u003c\/p\u003e\n\u003cp\u003eThe tag contains a NXP S50 chip and an antenna, and is passively powered by the reader\/writer when placed a couple inches away.\u003c\/p\u003e\n\u003cp\u003eThese can be read by almost any 13.56MHz RFID\/NFC reader but make sure it can handle MiFare cards as there are a few other encoding standards (like FeLica) They are tested and work great with both our \u003ca href=\"http:\/\/shop.pimoroni.com\/products\/pn532-nfc-rfid-controller-breakout-board-v1-6\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePN532 NFC\/RFID breakout board\u003c\/a\u003e and \u003ca href=\"http:\/\/shop.pimoroni.com\/products\/adafruit-pn532-nfc-rfid-controller-shield-for-arduino-extras\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAdafruit NFC\/RFID Shield for Arduino\u003c\/a\u003e!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThese chips can be written to\u003c\/li\u003e\n\u003cli\u003ecan store up to 1 KB of data in writable EEPROM divided into banks\u003c\/li\u003e\n\u003cli\u003ecan handle over 100,000 re-writes.\u003c\/li\u003e\n\u003cli\u003eYou can use our \u003ca href=\"http:\/\/shop.pimoroni.com\/products\/pn532-nfc-rfid-controller-breakout-board-v1-6\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePN532 NFC\/RFID breakout board\u003c\/a\u003e or \u003ca href=\"http:\/\/shop.pimoroni.com\/products\/adafruit-pn532-nfc-rfid-controller-shield-for-arduino-extras\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAdafruit NFC\/RFID Shield for Arduino\u003c\/a\u003e to read and write data to the EEPROM inside the tag.\u003c\/li\u003e\n\u003cli\u003eThere is also a permanent 4-byte ID burned into the chip that you can use to identify one tag from another\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ethe ID number cannot be changed\u003c\/b\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese use the S50 chipset, which used to be the 'classic' NFC chipset. In ~2014, the NFC forum decided not to support this chipset anymore, so newer phones do not support the MiFare classic. This only matters if you're trying to use this tag with a phone\/tablet.\u003c\/p\u003e\n\u003cp\u003eS50 chip specification:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 KiloByte (8 KiloBit) non-volatile EEPROM storage\u003c\/li\u003e\n\u003cli\u003eBuilt in encryption engine with 48-bit key\u003c\/li\u003e\n\u003cli\u003e4 Byte unique identifier burned into the chip\u003c\/li\u003e\n\u003cli\u003e13.56 MHz frequency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTag specification:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e30mm x 25mm x 6mm \/ 1.2\" x 1\" x 0.2\"\u003c\/li\u003e\n\u003cli\u003eWeight: 4.3g\u003c\/li\u003e\n\u003cli\u003eWorks about 2\" away from reader\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDownloads: \u003ca href=\"http:\/\/www.adafruit.com\/datasheets\/S50.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eNXP S50 datasheet\u003c\/a\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":14088069700,"sku":"ADA363","price":2.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/363-01.jpg?v=1576145793"},{"product_id":"mifare-classic-13-56mhz-rfid-nfc-leather-keychain-fob-1kb","title":"MiFare Classic (13.56MHz RFID\/NFC) Leather Keychain Fob - 1KB","description":"\u003cp\u003eThis is a blank MiFare Classic keychain fob - often used for electronic locks or customer identification but also found in other systems where a small and easy to carry tag is desired.\u003c\/p\u003e\n\u003cp\u003eThe tag contains a NXP S50 chip and an antenna, and is passively powered by the reader\/writer when placed a couple inches away.\u003cbr\u003e\u003cbr\u003eThese can be read by almost any 13.56MHz RFID\/NFC reader but make sure it can handle MiFare cards as there are a few other encoding standards (like FeLica). They are tested and work great with both our \u003ca href=\"http:\/\/shop.pimoroni.com\/products\/pn532-nfc-rfid-controller-breakout-board-v1-6\" target=\"_blank\"\u003ePN532 NFC\/RFID breakout board\u003c\/a\u003e and \u003ca href=\"http:\/\/shop.pimoroni.com\/products\/adafruit-pn532-nfc-rfid-controller-shield-for-arduino-extras\" target=\"_blank\"\u003eAdafruit NFC\/RFID Shield for Arduino\u003c\/a\u003e!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThese chips can be written to\u003c\/li\u003e\n\u003cli\u003ecan store up to 1 KB of data in writable EEPROM divided into banks\u003c\/li\u003e\n\u003cli\u003ecan handle over 100,000 re-writes.\u003c\/li\u003e\n\u003cli\u003eYou can use our \u003ca href=\"http:\/\/shop.pimoroni.com\/products\/pn532-nfc-rfid-controller-breakout-board-v1-6\" target=\"_blank\"\u003ePN532 NFC\/RFID breakout board\u003c\/a\u003e or \u003ca href=\"http:\/\/shop.pimoroni.com\/products\/adafruit-pn532-nfc-rfid-controller-shield-for-arduino-extras\" target=\"_blank\"\u003eAdafruit NFC\/RFID Shield for Arduino\u003c\/a\u003e to read and write data to the EEPROM inside the tag.\u003c\/li\u003e\n\u003cli\u003eThere is also a permanent 4-byte ID burned into the chip that you can use to identify one tag from another\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ethe ID number cannot be changed\u003c\/b\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese use the S50 chipset, which used to be the 'classic' NFC chipset. In ~2014, the NFC forum decided not to support this chipset anymore, so newer phones do not support the MiFare classic. This only matters if you're trying to use this tag with a phone\/tablet.\u003c\/p\u003e\n\u003cp\u003eS50 chip specification:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 KiloByte (8 KiloBit) non-volatile EEPROM storage\u003c\/li\u003e\n\u003cli\u003eBuilt in encryption engine with 48-bit key\u003c\/li\u003e\n\u003cli\u003e4 Byte unique identifier burned into the chip\u003c\/li\u003e\n\u003cli\u003e13.56 MHz frequency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTag specification:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e38.39mm \/ 1.51\" x 38.39mm \/ 1.51\" x 5.04mm \/ 0.2\"\u003c\/li\u003e\n\u003cli\u003e8.68g\u003c\/li\u003e\n\u003cli\u003eWorks about 2\" away from reader\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.adafruit.com\/datasheets\/S50.pdf\" target=\"_blank\"\u003eNXP S50 datasheet\u003c\/a\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":14088359108,"sku":"ADA1482","price":3.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/1482-02.jpg?v=1576145501"},{"product_id":"mifare-classic-13-56mhz-rfid-nfc-card-1kb","title":"MiFare Classic (13.56MHz RFID\/NFC) Card - 1KB","description":"\u003cp\u003eThis is a blank 13.56MHz RFID\/NFC card - often used for train\/bus passes but also found in other systems where a proximity card is desired. The tag contains a small RFID chip and an antenna, and is passively powered by the reader\/writer when placed a couple inches away.\u003c\/p\u003e\n\u003cp\u003eThese can be read by almost any 13.56MHz RFID\/NFC reader but make sure it can handle ISO\/IEC 14443 Type A cards as there are a few other encoding standards (like FeLica) They are tested and work great with both the \u003ca href=\"\/en-eu\/products\/pn532-nfc-rfid-controller-breakout-board-v1-6\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePN532 NFC\/RFID breakout board\u003c\/a\u003e and \u003ca href=\"\/en-eu\/products\/adafruit-pn532-nfc-rfid-controller-shield-for-arduino-extras\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAdafruit NFC\/RFID Shield for Arduino\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003eThese chips can be written to \u0026amp; store up to 1 KB of data in writable EEPROM divided into banks, and can handle over 100,000 re-writes. You can use the \u003ca href=\"\/en-eu\/products\/pn532-nfc-rfid-controller-breakout-board-v1-6\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePN532 NFC\/RFID breakout board\u003c\/a\u003e or \u003ca href=\"\/en-eu\/products\/adafruit-pn532-nfc-rfid-controller-shield-for-arduino-extras\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAdafruit NFC\/RFID Shield for Arduino\u003c\/a\u003e to read and write data to the EEPROM inside the tag. There is also a permanent 4-byte ID burned into the chip that you can use to identify one tag from another - the ID number cannot be changed.\u003c\/p\u003e\n\u003cp\u003eThese use a ISO\/IEC 14443 Type A chipset, which used to be the 'classic' NFC chipset. In ~2014, the NFC forum decided not to support this chipset anymore, so newer phones do not support it. This only matters if you're trying to use this tag with a phone\/tablet.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL DETAILS\u003c\/h2\u003e\n\u003cp\u003eRFID chip specification:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 KiloByte (8 KiloBit) non-volatile EEPROM storage\u003c\/li\u003e\n\u003cli\u003eBuilt in encryption engine with 48-bit key\u003c\/li\u003e\n\u003cli\u003e4 Byte unique identifier burned into the chip\u003c\/li\u003e\n\u003cli\u003e13.56 MHz frequency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTag specification:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e85.5mm x 54mm x 1mm \/3.36\" x 2.1\" x 0.03\"\u003c\/li\u003e\n\u003cli\u003e6.3 grams \/ 0.2 oz\u003c\/li\u003e\n\u003cli\u003eWorks about 4\" away from reader\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":14088455812,"sku":"ADA359","price":2.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/359-00.jpg?v=1576595020"},{"product_id":"potentiometer-knob-soft-touch-t18","title":"Potentiometer Knob - Soft Touch T18","description":"\u003cp\u003eIt's a 'soft touch' T18 knob that works great with our \u003ca href=\"https:\/\/www.adafruit.com\/products\/562\"\u003ePanel Mount 10K\u003c\/a\u003e, \u003ca href=\"https:\/\/www.adafruit.com\/products\/1789\"\u003ePanel Mount 1K\u003c\/a\u003e, and \u003ca href=\"https:\/\/www.adafruit.com\/products\/1831\"\u003ePanel Mount 100K\u003c\/a\u003e potentiometers.  \u003cspan\u003eThe knob is designed to set directly on the potentiometer's ridges so it's an easy \u0026amp; secure fit.\u003c\/span\u003e It has a nice feel, with a rubbery grip, tweaking it is quite fulfilling\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Red","offer_id":14088983620,"sku":"ADA2046","price":0.5,"currency_code":"GBP","in_stock":false},{"title":"White","offer_id":14088984132,"sku":"ADA2047","price":0.5,"currency_code":"GBP","in_stock":false},{"title":"Blue","offer_id":14088984260,"sku":"ADA2048","price":0.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/2047.jpeg?v=1571270059"},{"product_id":"break-away-0-1-36-pin-strip-male-header-10-pieces","title":"Break-away 0.1\" 36-pin strip male header (10 pieces)","description":"\u003cp\u003eBreakaway header is like the duct tape of electronics. Its great for connecting things together, soldering to perf-boards, fits into any breakout or breadboard, etc.\u003c\/p\u003e\n\u003cp\u003eWe go through these guys real fast, and thought that given how handy they are, we'd offer them in a pack of ten!\u003c\/p\u003e\n\u003cp\u003eEach pack contains 10 36-pin long headers, 0.1\" pitch, that can be stacked next to each other on a 0.1\" grid and broken apart easily with pliers or diagonal cutters. They're even gold plated so they wont oxidize!\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":14089261956,"sku":"ADA392","price":4.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/392.jpeg?v=1571270059"},{"product_id":"massive-arcade-button-with-led-100mm-red","title":"Massive Arcade Button with LED - 100mm Red","description":"\u003cp\u003eDO NOT PRESS THE BIG RED BUTTON!\u003c\/p\u003e\n\u003cp\u003eThis 100mm diameter arcade button with a \u003cb\u003e10mm deep plastic base \u003c\/b\u003eis so massive and inviting it may collapse upon itself and form a black hole from which not even light can escape!\u003c\/p\u003e\n\u003cp\u003eUntil it does, however, it ready for all sorts of pressing and pushing. Science has shown no one can resist pressing its shiny surface and saying \"beep!\". We've seen these on some games of skill in arcades, they're easy to mount on nearly any kind of enclosure. They're not waterproof or weatherproof, so best used indoors.\u003c\/p\u003e\n\u003cp\u003eThis button has a domed red plastic cover with a black retaining ring around it. There's an optional LED included that will light up the button. The LED has a built in resistor so you can run it up to 12V but given the massive size and shallow depth of the button, it doesn't illuminate the entire button face evenly. The button activates a common arcade microswitch (included), the switch contacts are normally open. When the button is pressed, the contacts close.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cp\u003eMicro switch terminals are 0.187\" wide, LED connection terminals are 0.25\" wide\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":14089517060,"sku":"ADA1185","price":8.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/1185-00.jpg?v=1665147793"},{"product_id":"2-4ghz-mini-flexible-wifi-antenna-with-ufl-connector-100mm","title":"2.4GHz Mini Flexible WiFi Antenna with uFL Connector - 100mm","description":"\u003cp\u003eThis 4\" \/ 100mm long \u003cstrong\u003eflexible uFL 2.4GHz antenna\u003c\/strong\u003e has approx 4DBi gain and a 50Ω impedance so it will work fantastically with just about any 2.4-2.5GHz wireless receiver\/transmitter such as the \u003ca href=\"https:\/\/shop.pimoroni.com\/search?type=product\u0026amp;q=cc3000\" target=\"_blank\"\u003eAdafruit CC3000s\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003eAntenna comes with a uFL (a.k.a u.FL \/ IPX \/ IPEX) connector, so no more need for additional adapters to get your IoT cloud flying high!\u003c\/p\u003e\n\u003cstrong\u003eTECHNICAL DETAILS\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Range: 2400~2500MHz \/ 4900~5900MHz\u003c\/li\u003e\n\u003cli\u003eEfficiency: 90%\u003c\/li\u003e\n\u003cli\u003eBandwidth (VSWR: 2.0 max.) 140 MHz \/ SWR \u0026lt; 2.0\u003c\/li\u003e\n\u003cli\u003ePolarization: Linear\u003c\/li\u003e\n\u003cli\u003eRadiation: Omni directional\u003c\/li\u003e\n\u003cli\u003eAntenna Gain: 4DBi\u003c\/li\u003e\n\u003cli\u003eImpedance: 50 ohm\u003c\/li\u003e\n\u003cli\u003eCable: 100mm \/ 4\" long\u003c\/li\u003e\n\u003cli\u003eAntenna: 40mm x 8mm \/ 1.6\" x 0.3\"\u003c\/li\u003e\n\u003cli\u003eWeight: 0.7g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":14089613764,"sku":"ADA2308","price":2.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/2308-01.jpeg?v=1571270059"},{"product_id":"break-away-headers","title":"Break Away Headers","description":"\u003cp\u003e40 pin headers in one row of either straight or right-angle header, just cut to the size you need!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePin Style: Square\u003c\/li\u003e\n\u003cli\u003eNumber of Pins: 40\u003c\/li\u003e\n\u003cli\u003ePin Spacing: 0.1\" (2.54 mm)\u003c\/li\u003e\n\u003cli\u003ePin Length: 11.5 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Generic","offers":[{"title":"Straight","offer_id":14136913860,"sku":"COM1106","price":1.25,"currency_code":"GBP","in_stock":true},{"title":"Right-Angle","offer_id":14136913924,"sku":"COM1107","price":1.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/00116-02-L.jpeg?v=1571270061"},{"product_id":"female-headers","title":"Female Headers","description":"\u003cp\u003eA single row of 40 female headers which can easily be cut down to any size you need!\u003c\/p\u003e\n\u003cp\u003eThese headers can be cut to size with a pair of wire-cutters, though you will probably lose one pin with each cut.They mate very well with \u003ca href=\"\/en-eu\/products\/break-away-headers\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ebreak away male headers.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReceptacle Style: Square\u003c\/li\u003e\n\u003cli\u003eNumber of Pins: 40\u003c\/li\u003e\n\u003cli\u003ePin Spacing: 0.1\" (2.54 mm)\u003c\/li\u003e\n\u003cli\u003eReceptacle Depth: 6 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Generic","offers":[{"title":"Default Title","offer_id":14136917572,"sku":"COM1108","price":1.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/00115-03-L.jpeg?v=1571270061"},{"product_id":"break-away-headers-long","title":"Break Away Headers - Long","description":"\u003cp\u003eThese are a longer version of our \u003ca href=\"http:\/\/shop.pimoroni.com\/products\/break-away-headers\" target=\"_blank\" rel=\"noopener noreferrer\"\u003estandard\u003c\/a\u003e break away headers. They are 20mm long which allows you use them socket to socket.\u003c\/p\u003e\n\u003cp\u003eThe plastic separator can be slid up or down to accommodate your needs.\u003c\/p\u003e\n\u003cp\u003eYou will get a row of 40 pins. They can be broken or snipped to length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePin Style: Square Pins\u003c\/li\u003e\n\u003cli\u003eNumber of Pins: 40\u003c\/li\u003e\n\u003cli\u003ePin Spacing: 0.1\" (2.54 mm)\u003c\/li\u003e\n\u003cli\u003ePin Length: 20 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.sparkfun.com\/datasheets\/Components\/longerheaders.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDimensional Drawing\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Generic","offers":[{"title":"Default Title","offer_id":14136962436,"sku":"COM1112","price":1.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/10158-01.jpeg?v=1571270061"},{"product_id":"short-feather-male-headers-12-pin-and-16-pin-male-header-set","title":"Short Feather Male Headers - 12-pin and 16-pin Male Header Set","description":"\u003cp\u003eThese two \u003cstrong\u003eShort\u003c\/strong\u003e \u003cstrong\u003eMale Headers\u003c\/strong\u003e alone are, well, lonely. But pair them with any of our \u003ca href=\"https:\/\/shop.pimoroni.com\/search?type=product\u0026amp;q=feather\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFeather\u003c\/a\u003e boards and you're in business!\u003c\/p\u003e\n\u003cp\u003eThese headers are particularly cute and tiny and are designed to \u003ca href=\"https:\/\/www.adafruit.com\/products\/2940\"\u003ematch perfectly with our shorty female header kit for Featherwings\u003c\/a\u003e. Note that you \u003cem\u003ecould\u003c\/em\u003e use normal header with those headers but these are short and dont need clipping. By using both you can get a 3.5mm slimmer Feather+Wing setup Unlike our \u003ca href=\"https:\/\/shop.pimoroni.com\/products\/feather-stacking-headers-12-pin-and-16-pin-female-headers\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFeather Stacking Headers\u003c\/a\u003e, they aren't designed to 'stack', but they're way more compact.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.pimoroni.com\/search?type=product\u0026amp;q=feather\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCheck out all of our Feather boards, FeatherWings, and Feather accessories here!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eNote: Comes with one 12-pin and one 16-pin header.  \u003ca href=\"https:\/\/shop.pimoroni.com\/search?type=product\u0026amp;q=feather\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFeathers\u003c\/a\u003e not included. \u003ca href=\"https:\/\/www.adafruit.com\/products\/2940\"\u003eDoesn't come with the matching female headers, you'll want a set of those too!\u003c\/a\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":17304540420,"sku":"ADA3002","price":0.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/3002.jpeg?v=1571270065"},{"product_id":"cln-lithium-3v-coin-cell-cr2032-pack-of-5","title":"CLN Lithium 3V Coin Cell CR2032 - Pack of 5","description":"\u003cspan\u003eThis is a great value, high quality battery.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCLN Lithium 3V coin cell CR2032 200mA\/h\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eStrip of 5\u003c\/span\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":18976251780,"sku":"KIT-2262","price":2.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/2262.jpeg?v=1571270069"},{"product_id":"crocodile-leads-set-of-10","title":"Crocodile Leads (set of 10)","description":"\u003cp\u003eFive pairs of crocodile leads (red, black, green, yellow and white) with plastic insulated 35mm crocodile clips at each end.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLead length 550mm.\u003c\/li\u003e\n\u003cli\u003eThick AWG22 wiring results in a low voltage drop and high current capability (4A max)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for making \u003ca href=\"\/en-eu\/search?type=product\u0026amp;q=crumble\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCrumble\u003c\/a\u003e connections!\u003c\/p\u003e","brand":"Redfern Electronics","offers":[{"title":"Default Title","offer_id":21402896836,"sku":"CRM-005","price":2.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Croc-clips.jpg?v=1571270070"},{"product_id":"male-40-pin-2x20-hat-header","title":"Male 40-pin 2x20 HAT Header","description":"\u003cp\u003eThese 40-pin 2x20 male headers can be used on a Pi Zero or a pHAT to break out the pins.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eYou can choose either straight or at a 90° angle.\u003c\/p\u003e\n\u003cp\u003eAdd one to a Pi Zero for compatibility with HATs (which use a female header).\u003c\/p\u003e\n\u003cp\u003eCan be used to solder a Pi Zero and pHAT permanently together.\u003c\/p\u003e\n\u003cp\u003eThe 90° version is great for mounting inside projects at a right-angle or for routing wiring back underneath a HAT where space is at a premium but you don't want to solder wires directly onto your precious boards.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e You should be competent at soldering before attempting to add a right-angle header, they can be a little tricky.\u003c\/p\u003e","brand":"Generic","offers":[{"title":"Male 40-pin Header","offer_id":21579504068,"sku":"COM1101","price":0.83,"currency_code":"GBP","in_stock":true},{"title":"Male Right-Angle 40-pin Header","offer_id":21579504132,"sku":"COM1102","price":0.83,"currency_code":"GBP","in_stock":true},{"title":"Extended Male 40-pin Header","offer_id":20543782682694,"sku":"COM1113","price":0.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/40pin_male_2_of_4.jpg?v=1571270070"},{"product_id":"led-module-pair","title":"LTP-305 LED matrix (pair)","description":"\u003cp\u003eThe Lite-On LTP-305 LED matrices have quite a heritage! They were first developed in 1971 by Texas Instruments, but subsequently have been manufactured by Lite-On.\u003c\/p\u003e\n\u003cp\u003eThey're available in two suitably retro colours - red or green - and each display has 5x7 pixels, plus a decimal point.\u003c\/p\u003e\n\u003cp\u003eThe matrices can be driven by our \u003ca href=\"https:\/\/shop.pimoroni.com\/products\/microdot-phat\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMicro Dot pHAT board\u003c\/a\u003e, with up to 6 matrices in your choice of colours. Or drive them directly from a suitable microcontroller or matrix driver chip like the IS31FL3730 we use on Micro Dot pHAT.\u003c\/p\u003e","brand":"Generic","offers":[{"title":"Red","offer_id":21660864388,"sku":"COM0509","price":4.25,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":21660864452,"sku":"COM0510","price":4.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/LED_module_1_of_2.jpg?v=1571270071"},{"product_id":"electret-microphone-20hz-20khz-omnidirectional","title":"Electret Microphone - 20Hz-20KHz Omnidirectional","description":"\u003cp\u003eThis electret capsule microphone is the same one Adafruit use in their great microphone amplifier board. It contains a small vibrating element that will output a few milllivolts peak-to-peak.\u003c\/p\u003e\n\u003cp\u003eYou will need an op-amp to amplify the signal, some chips are designed with the amplifier built in in which case you can wire it up directly.\u003c\/p\u003e\n\u003cp\u003eThis is an \"omnidirectional\" microphone, with -44dB sensitivity, and has 20-20KHz frequency response. You can plug it into a breadboard or perfboard or solder wires to the little wires sticking out the back.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.openmusiclabs.com\/learning\/sensors\/electret-microphones\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCheck out OpenMusicLab's great tutorial on Electret Microphones for a deeper look at how these sensors work\u003c\/a\u003e. If you need an amplifier board, \u003ca href=\"\/en-eu\/products\/adafruit-electret-microphone-amplifier\" target=\"_blank\" rel=\"noopener noreferrer\"\u003esee Adafruits fully-assembled and tested mic amp board with adjustable gain.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.adafruit.com\/datasheets\/CMA-4544PF-W.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eElectret Capsule Microphone Datasheet\u003c\/a\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":22021302468,"sku":"ADA1064","price":1.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/1064-02.jpg?v=1576144731"},{"product_id":"conductive-fiber-stainless-steel-20um-10-grams","title":"Conductive Fiber - Stainless Steel 20um - 10 grams","description":"\u003cp\u003eThis conductive fiber is super interesting! It's great for felting and could also be spun into yarn if that's your thing. Adafruit tested many different fiber thicknesses for needle felting and found that this one (20um fiber thickness) is the most pleasurable to work with.\u003c\/p\u003e\n\u003cp\u003eUse about 0.2g of the stuff to make a felt touch button suitable for use with the \u003ca href=\"https:\/\/shop.pimoroni.com\/products\/makey-makey-an-invention-kit-for-everyone\" target=\"_blank\"\u003eMaKey MaKey\u003c\/a\u003e or capacitive touch sensing circuit. Make felt controllers or felt buttons onto an existing wool sweater!\u003c\/p\u003e\n\u003cp\u003e You can also make a squeeze\/pressure sensor with this fiber, as it becomes less resistive the more you squeeze the fibers together. Make sure to combine this fiber with a natural animal fiber (which have \"scales\") for best results. We think 10g is the perfect amount and will get you through several projects.\u003c\/p\u003e\n\u003cp\u003eMaKey MaKey and alligator clips not included!\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":22021320580,"sku":"ADA1088","price":2.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/1088_9d7616e5-da95-461c-aa28-c26a5e78d66f.jpg?v=1571270073"},{"product_id":"servo-generic-sub-micro-size","title":"Servo - Generic (Sub-Micro Size)","description":"\u003cp\u003eHere is a simple, low-cost, high quality servo for all your mechatronic needs.\u003c\/p\u003e\n\u003cp\u003eThis servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts and deliver 20.8 oz-in. of maximum torque at 0.10 sec\/60°\u003c\/p\u003e\n\u003cp\u003eThis small servo comes with a standard 3 pin power and control cable, and all hardware listed below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This servo is rated for 180° rotation, but in actuality it only hits ~160°.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage: 4.8-6.0 Volts\u003c\/li\u003e\n\u003cli\u003eTorque: 16.6\/20.8 oz-in. (4.8\/6.0V)\u003c\/li\u003e\n\u003cli\u003eSpeed: 0.15\/0.10 sec\/60° (4.8\/6.0V)\u003c\/li\u003e\n\u003cli\u003eRotation: ~160°\u003c\/li\u003e\n\u003cli\u003eSingle Top Ball Bearing\u003c\/li\u003e\n\u003cli\u003eNylon Gears\u003c\/li\u003e\n\u003cli\u003e3-Pole Ferrite Motor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x Micro Size Servo\u003c\/li\u003e\n\u003cli\u003e1x Single Arm Micro Horn\u003c\/li\u003e\n\u003cli\u003e1x Double Arm Micro Horn\u003c\/li\u003e\n\u003cli\u003e1x Four Point Micro Horn\u003c\/li\u003e\n\u003cli\u003e1x Circle Micro Horn\u003c\/li\u003e\n\u003cli\u003e2x 2x8mm Phillips Screw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimension:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e31.8 x 11.7 x 29mm\u003c\/li\u003e\n\u003cli\u003eWire Length: 160mm\u003c\/li\u003e\n\u003cli\u003eWeight: 9g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/cdn.sparkfun.com\/datasheets\/Robotics\/Small%20Servo%20-%20ROB-09065.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/mbed.org\/cookbook\/Servo\" target=\"_blank\"\u003embed Example\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":22185818244,"sku":"ROB-09065","price":8.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/09065-01a.jpg?v=1571270076"},{"product_id":"rocker-switch","title":"Rocker Switch","description":"\u003cp\u003eThe rocker switch is a classic and this one is a great size for an unobtrusive on\/off switch.\u003c\/p\u003e\n\u003cp\u003eIt can be panel mounted and has two tabs for connecting wire. You can either solder wire or use a quick-connect connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum Voltage: 250VAC\u003c\/li\u003e\n\u003cli\u003eMaximum Current: 6A @ 250VAC or 10A @ 125VAC\u003c\/li\u003e\n\u003cli\u003eContact Resistance: ≤35mΩ\u003c\/li\u003e\n\u003cli\u003eInsulation Resistance: ≥100MΩ\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -25°C to 85°C\u003c\/li\u003e\n\u003cli\u003eSnap-in Panel Mount\u003c\/li\u003e\n\u003cli\u003eSwitch face measures 15 x 21mm\u003c\/li\u003e\n\u003cli\u003eSwitch body measures 12 x 19 x 14mm (w x d x h, not including rocker or contacts)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Generic","offers":[{"title":"Default Title","offer_id":22185819396,"sku":"COM0415","price":1.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/Rocker_Switch_1_of_2.JPG?v=1571270076"},{"product_id":"battery-holder-3xaa-with-cover-and-switch","title":"Battery Holder 3xAA with Cover and Switch","description":"\u003cp\u003eThis 3xAA battery holder puts a nice finishing touch on your battery powered project.\u003c\/p\u003e\n\u003cp\u003eThis holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON\/OFF switch which can be used to control power to your project.\u003c\/p\u003e\n\u003cp\u003eThe leads are about 150mm, and the last 5mm of them are tinned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 68.5 x 47.5 x 19.6mm\u003c\/p\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":22185822148,"sku":"PRT-10891","price":1.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/10891-01b.jpg?v=1571270076"},{"product_id":"audio-jack-1-4-stereo-right-angle","title":"Audio Jack - 1\/4\" Stereo (right angle)","description":"\u003cp\u003eThis is the kind of ¼\" stereo jack you might find in home stereos and PA systems. Switched contacts allow you to detect whether or not there is something plugged in to the jack. The jack can be panel mounted in an 11mm diameter hole.\u003c\/p\u003e\n\u003cp\u003eThe jack comes with a plastic washer and nut for panel mounting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Looking for a breakout to hook this audio jack up to your project a little easier? Check out the \u003ca href=\"SparkFun%20TRS%20Jack%20Breakout%20-%201\/4%22%20Stereo\" target=\"_blank\"\u003eSparkFun TRS Jack Breakout\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/cdn.sparkfun.com\/datasheets\/Components\/General\/JP-611%20DD.jpg\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e (JP-611)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":22185867332,"sku":"COM-11144","price":1.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/11144-01.jpg?v=1571270078"},{"product_id":"photo-interrupter-gp1a57hrj00f","title":"Photo Interrupter - GP1A57HRJ00F","description":"\u003cp\u003eThis sensor is composed of an infrared emitter on one upright and a shielded infrared detector on the other. By emitting a beam of infrared light from one upright to the other, the sensor can detect when an object passes between the uprights, breaking the beam.\u003c\/p\u003e\n\u003cp\u003eUsed for many applications including optical limit switches, pellet dispensing, general object detection, etc.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot Width\u003c\/td\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAperture Width\u003c\/td\u003e\n\u003ctd\u003e1.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIf - Forward Current\u003c\/td\u003e\n\u003ctd\u003e7 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Operating Temperature\u003c\/td\u003e\n\u003ctd\u003e- 25 C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Operating Temperature\u003c\/td\u003e\n\u003ctd\u003e+ 85 C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e15.9 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Type\u003c\/td\u003e\n\u003ctd\u003ePull Up, Buffer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage\/Case\u003c\/td\u003e\n\u003ctd\u003e18.6 mm x 15.2 mm x 5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensing Method\u003c\/td\u003e\n\u003ctd\u003eTransmissive, Slotted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e18.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Channels\u003c\/td\u003e\n\u003ctd\u003e1 Channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFall Time\u003c\/td\u003e\n\u003ctd\u003e0.05 us\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh Level Output Voltage\u003c\/td\u003e\n\u003ctd\u003e4.9 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIr - Reverse Current\u003c\/td\u003e\n\u003ctd\u003e10 uA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow Level Output Current\u003c\/td\u003e\n\u003ctd\u003e16 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow Level Output Voltage\u003c\/td\u003e\n\u003ctd\u003e0.15 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Supply Voltage\u003c\/td\u003e\n\u003ctd\u003e4.5 V to 17 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePd - Power Dissipation\u003c\/td\u003e\n\u003ctd\u003e250 mW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eOptical Switches, Transmissive, Photo IC Output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRise Time\u003c\/td\u003e\n\u003ctd\u003e0.1 us\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVf - Forward Voltage\u003c\/td\u003e\n\u003ctd\u003e1.14 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVr - Reverse Voltage\u003c\/td\u003e\n\u003ctd\u003e3 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit Weight\u003c\/td\u003e\n\u003ctd\u003e1.169 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eDocuments:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/GP1A57HRJ00F.pdf?18219427927998845302\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Generic","offers":[{"title":"Default Title","offer_id":22185871940,"sku":"COM1702","price":3.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/COM1702_1_of_2.JPG?v=1576144612"},{"product_id":"rotary-encoder-illuminated-rgb","title":"Rotary Encoder - Illuminated (RGB)","description":"\u003cp\u003eRotary encoders can be used similarly to potentiometers. The difference being that an encoder has full rotation without limits (It just goes round and round).\u003c\/p\u003e\n\u003cp\u003eThis is a quadrature encoder and outputs similar to 2-bit \u003ca href=\"http:\/\/en.wikipedia.org\/wiki\/Gray_code\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egray code\u003c\/a\u003e so that you can tell how much and in which direction the encoder has been turned. They’re great for navigating menu screens and things like that.\u003c\/p\u003e\n\u003cp\u003eThis encoder is especially cool because it has a common anode RGB LED built in, as well as a push-button.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch Travel: 0.5mm\u003c\/li\u003e\n\u003cli\u003eShaft Diameter: 6.0mm\u003c\/li\u003e\n\u003cli\u003eShaft Length: 18mm\u003c\/li\u003e\n\u003cli\u003eVertical Through-Hole Mount\u003c\/li\u003e\n\u003cli\u003e24 Pulses per Rotation\u003c\/li\u003e\n\u003cli\u003eRed\/Green\/Blue LED\u003c\/li\u003e\n\u003cli\u003ePushbutton\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe also have a handy \u003ca href=\"\/en-eu\/products\/sparkfun-rotary-encoder-breakout-illuminated-rg-rgb\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ebreakout board\u003c\/a\u003e to make it even easier to install into your project and a \u003ca href=\"\/en-eu\/products\/clear-plastic-knob\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eclear plastic knob\u003c\/a\u003e if you need a better grip on your encoder!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/cdn.sparkfun.com\/datasheets\/Components\/Switches\/EC12PLRGBSDVBF-D-25K-24-24C-6108-6HSPEC.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/cdn.sparkfun.com\/datasheets\/Components\/Switches\/EC12PLRGBSDVBF-D-25K-24-24C-6108-6H.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDimensional Drawing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.circuitsathome.com\/mcu\/reading-rotary-encoder-on-arduino\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTutorial and Arduino Project\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/youtu.be\/HELBcKLL0Zs?t=10s\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eProduct Video\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/bildr.org\/2012\/08\/rotary-encoder-arduino\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ebildr Tutorial\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Generic","offers":[{"title":"Default Title","offer_id":22185882564,"sku":"COM1006","price":3.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/10982-01a.jpg?v=1571270079"},{"product_id":"metal-knob-14x24mm","title":"Metal Knob - 14x24mm","description":"\u003cp\u003eKnobs are a great way to finish off your project and make it easier to adjust the level of your death ray.\u003c\/p\u003e\n\u003cp\u003eThis knob mates to a 0.25\" shaft. The knob slides onto the potentiometer and holds tightly with a strong friction fit.\u003c\/p\u003e\n\u003cp\u003eThe main body of these knobs is metal with a plastic insert. The outside is knurled for precise adjustment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e14mm high\u003c\/li\u003e\n\u003cli\u003e24mm diameter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparkfun","offers":[{"title":"Silver","offer_id":22185906692,"sku":"COM-10001","price":1.5,"currency_code":"GBP","in_stock":false},{"title":"Black","offer_id":22185906756,"sku":"COM-10002","price":1.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0389\/1025\/products\/10001-05-Working.jpg?v=1571270080"}],"url":"https:\/\/wholesale.pimoroni.com\/en-eu\/collections\/components.oembed","provider":"Pimoroni Wholesale","version":"1.0","type":"link"}